PCBTok’s Outstandingly Fabricated Blue PCB
PCBTok’s Blue PCB has been meticulously crafted by the hands of our expert engineers and technician; thus, we have only been providing the best products.
- Expect to have often updated concerning your quote from us.
- Our refund services are available within 24 hours after the purchase.
- Specializing in manufacturing PCBs for twelve years.
- Dedicated personnel experts are available at all times.
- We only deploy PCBs that conforms to IPC Class 2 or 3.
Highly Superior Blue PCB Products from PCBTok
Our Blue PCB here at PCBTok is made of excellence and not mediocrity. We are doing this to supply you with a premium and efficient Blue PCB.
We’re constantly doing our best to increase our knowledge with Blue PCBs and other PCB products we offer to continually satisfy our customers.
PCBTok’s Blue PCB continuously undergoes various research to improve it more; we seek to please you and put a smile on your face with our products and services.
We appreciate you; hence, you will expect constant superb treatment with us.
PCBTok’s always been driven by the passion to fulfill your needs in a Blue PCB. We keep on looking at our products from your perspective; thus, you can guarantee a product that is user-friendly.
Blue PCB By Feature
Blue PCB By Surface Finish (5)
Blue PCB By Layer (5)
Advantages of Utilizing PCBTok’s Blue PCB
Among the perks a Blue PCB can provide are the following:
- Contrast – It offers a good balance between the solder mask and silkscreen. This is ideal if your applications possess lots of part numbers.
- Clarity – The dirt build-up can be easily spotted, and it is fairly easy to distinguish the metal from the board.
- Aesthetics – In comparison with the green-colored board, it is way more pleasing to look at. Also, it can be easily repaired.
If you wish to know more about PCBTok’s Blue PCB capabilities, we are available around the clock to assist your queries.
Proper Guidelines in Integrating Blue PCB Components
Apart from choosing the right manufacturer to perfectly build your Blue PCB, it is also essential to have adequate knowledge in incorporating components on it.
These are the following factors you might want to consider in placing components:
- Functionality – Calibrate each component before placing.
- Placement – Determine the power, signal, and ground tracing before attaching the electrical components. This will reduce the risk of failure.
- Categorization – Sort the components according to their usage; this will also aid in heating concerns along the way.
Just message us for the detailed guidelines; we are available 24/7.
Layers that Comprise the Blue PCB
There are several different layers that compose the Blue PCB; they are glued like sandwiches. Here are those layers:
- FR4 – A base material that provides rigidity, thickness, and stability to the PCB.
- Copper – This can be located on top of the FR4 and below the solder mask layer.
- Solder Mask – Located at the top most part; this showcases the Blue PCB color.
- Silkscreen – This is on top of the solder mask layer that contains letters, numbers, and words that act as an indicator and guideline for the assembler.
If you wish to have further knowledge concerning the common stack-up of PCBTok’s Blue PCB, you can just message us.
PCBTok's Excellence in Producing Finest Blue PCB
Since our Blue PCB has obtained the required certifications from PCBTok, you can be sure that all of the products we supply to you have met all applicable international standards and are functioning properly.
In order to prevent failures, we also always guarantee that our Blue PCB goes through a comprehensive and accurate production procedure.
Furthermore, to further solidify the performance of our Blue PCB, it will be subjected to heavy testing and strict evaluations for the product to be free from any errors. We will not deliver a product that is made of mediocrity.
All of these are conducted by our designated professionals to assure they have performed accordingly; you can put away your worries with us!
Blue PCB Fabrication
All manufacturers have their own unique ways of producing your Blue PCB; however, these are the steps you must consider.
All of these mentioned phases should be present and performed in manufacturing your Blue PCB to guarantee that they are of good quality.
These stages are what we currently perform here at PCBTok with regard to Blue PCB manufacturing. Also, it undergoes various tests.
We want to be transparent with you; thus, if you have any queries and concerns about this, you can directly contact us.
One thing that shouldn’t be disregarded in manufacturing your Blue PCB is the testing. Here are the standard inspections:
In-Circuit Testing, Flying Probe Testing, Automated Optical Inspection, Burn-in Testing, X-Ray Inspection, and Functional Testing.
However, these mentioned tests may vary according to the manufacturer. We perform all of these to make sure that your Blue PCB is functional.
We want to make sure that you will receive a product from us that you can use for a long period of time, and is extremely efficient.
PCBTok welcomes any questions you have concerning the mentioned phases; we will be more than happy to provide you answers with to them.
OEM & ODM Blue PCB Applications
Blue PCB Production Details As Following Up
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“It has been a pleasure of mine to transact with the ever professional PCBTok. All of my expectations are far exceeded. Also, they made my standards so high after receiving my order from them. I’d like to thank the people behind PCBTok who constantly helped me throughout my business with them. They are all great and professional people. I am hoping to experience this again with you soon. PCBTok is a highly recommended manufacturer for your PCBs; you won’t go wrong with them.”Edward Murphy, Electronics Technician from North Carolina, USA
“Truthfully speaking, my experience with PCBTok is so fast and smooth. After I sent an inquiry, they promptly accommodated me and handled my orders. Also, I appreciate that you kept me posted about the status of my order on a regular basis; this eased my concerns. Their professional personnel deserve commendation as well; they are extremely helpful to me. Finally, every one of the 40 Blue PCBs I got from them is in excellent condition. I’ve already used some of it, and it has no damage and is functioning fairly well. I appreciate your assistance, PCBTok!”Zachary Dyer, Owner of Mobile Electronics Shop from Augusta, USA
“A huge thanks to PCBTok for supplying me a bunch of PCBs that is all in perfect shape. Although, I admit that I was hesitant at first to purchase 100 pieces of PCBs from them. However, all of my worries completely vanished right away after I saw the conditions of my products. Thank you to your ever-helpful staff. I look forward to our further transactions. Also, I should probably recommend you to my peers.”Linda Meyer, Electrical Design Engineer from Hobart, Canada