Quality Checked Materials in Your Display PCB
Better quality PCBs are provided by an experienced manufacturer like us. Our Display PCBs, like all of our PCBs, leave our factory only after rigorous testing.
With our manufacturing process, we adhere to professionalism. When it comes to your order, your satisfaction is our top priority. As a result, we go to great lengths to fulfill your requests.
We can always deliver the PCB you deserve on time.
For Operating at Peak Display Efficiency
Customers typically request this type of PCB with specifications for consumer use, as well as those for telecommunications, office, and industry.
Orders for Bluetooth, IoT, broadband, and other similar items have been fulfilled by our company, faithfully.
Because we value open communication with customers, our staff is approachable.
Our helpful sales representatives can walk you through the simple ordering process for this PCB or any other type you might want.
You can reach us via chat, email, or phone at any time of day or night.
We are here to help!
Display PCB By Usage
Display PCB By Feature (5)
Display PCB By Material Type (6)
Performs Extensive Work on Your PCB
As an experienced PCB maker, you can trust us because we have a reliable work record in the electronics manufacturing industry.
Display PCB items such as medical, automotive, and common consumer products are available readily, without delay.
Our company is a RoHS and REACH compliant company.
Also, we can make deliveries in as little as 24 hours.
We are extensively dedicated help you succeed, make us your OEM partner!
Readying Your Display PCB Order
When we ready your PCB order for display gadgets, we are strict with Quality Control.
We do not hire subpar workers because we prefer to hire only experienced workers in the PCB industry.
Neither do we use subpar fakes as our laminates and prepregs.
All our PCB materials are guaranteed authentic. Check out our certificates.
We are PCBTok, and we offer a wide range of high-class and Printed Circuit Boards for your display device.
Choices for Display PCB
There is an extensive line-up of choices if you are looking for PCBs of this type.
We make the following at our large plant:
- PCBs for computer monitors
- PCBs for vehicle dashboards
- Medical display circuit boards
Plus, all your other needs—they are prioritized at PCBTok.
Proper Displays Enabled with PCBTok’s PCBs
PCBTok is a PCB fabrication company that specializes in cutting-edge PCB technology.
We do, however, offer excellent PCB prototyping and PCB customization for Display PCBs.
Our entire team, from management to workshop workers, will be delighted to help you with your PCB order.
Simply submit your request for any kind of PCB geared for monitors, projectors and display gadgets.
If you are looking for a dependable PCB supplier in China, choose the right PCB supplier for your needs.
Display PCB Fabrication
The primary purpose of using displays is to inspect the optics.
You must test the functionality of any device used.
This critical piece of circuitry is required for the KPI to be measured.
As a result, the PCB for displays (monitors, etc.) must not only be operational, they must be properly installed.
Your product is guaranteed to work if you get your orders from PCBTok.
The PCBTok team is made up of highly skilled engineers who can assist you in developing customized products for your company or organization.
- Commercial establishments – surveillance equipment
- Medical devices like glucometers, pulse oximeters, weighing scales
- Multifunction displays used in land or sea vehicles
Nothing is more important to us than the quality of the PCBs we manufacture, which is why we put so much care into each and every one of them.
OEM & ODM Display PCB Applications
Display PCB Production Details As Following Up
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“The people who work here are skilled, hardworking, and professional. The PCBTok team in Shenzhen provides excellent service and work. They always took a proactive approach, diagnosing potential problems and recommending better materials to avoid future issues. And we never had to worry about them trying to upsell us. With so many customers, there’s no reason for the company to inflate prices or mislead you. It is a trustworthy company for your PCB requirements.”Edmond Murray, from PCB Designer Engineer from Canberra, Australia
“When we compared PCBTok’s prices to those of other PCB online stores, PCBTok’s prices were always lower. They will notify you if you have an upcoming delivery. I appreciate that because I am usually very busy. I’ve made a lot of money as a result of their hard work and attention to my PCB. I would definitely bring them my future projects. I appreciate their help and kind assistance.”Roger Ribeiro, Buying and Creative Director from Buenos Aires, Argentina
“I knew these guys were good and honest because of a friend in my city. Even though it was a last-minute inquiry, they were extremely accommodating. They performed a thorough examination of my PCB design, ensuring that there were no flaws. They could have charged a lot more for and told me something was wrong, but they only charged me a small fee for the extra service. I’d hire them to make PCBs for me, and I’d recommend them to anyone. PCBTok is well worth it.”Kristian Madsen, Supply Chain Manager from Aalborg, Jutland, Denmark