Change Language
Hard Disk PCB Worth Your Time
Having a competent PCB fabricator is critical for your business, especially if you are in the computer industry.
This Hard Disk or Hard Drive PCB is used in a range of devices with varying specifications.
You can expect complete satisfaction when you work with us as your PCB provider.
We can also provide Turnkey PCB Assembly, so it is convenient for you.
Attracting Growth With Stable PCBs
There is no minimum order quantity for your Hard Drive PCB.
Our team of professionals is available to assist you at any time of day or night.
We employ approximately 500 highly skilled professionals.
If you request a WIP report, you will receive information about the status of your PCB on a weekly basis.
We are fully compliant with all necessary US and Canadian certificates, such as UL.
To ensure quality, all our PCBs are thoroughly handled by our experienced engineers and workers.
Hard Disk PCB By Feature
Hard Disk Drive is called HDD in short. Hence, a PCB for Hard Disk can also be called a Hard Drive PCB.
If necessary, completing this delicate task means you have to get the right-aligned PCB, which we can provide.
When considering changing the PCB, enough attention must be paid to the booting mechanism enabled by the ROM.
NV-RAM is vital. For the hard disk, it means that your data will stay intact even if the computer is turned off.
This controller is integrated into the motherboard, but it can also be a separate card. It is located at the bottom of the PCB.
This PCB is appropriate for laptops that still have hard drives. It can be designed specifically for older models.
Hard Disk PCB By Storage Capacity (5)
-
You use an external hard drive powered by a PCB to back up your files and make them portable.
-
This is the lowest amount of memory available. Suitable for mini laptops. It is the memory required for students’ light tasks.
-
This is an adequate memory capacity for most devices. It is easy to produce as a PCB. But it’s not for gaming enthusiasts.
-
The tier this belongs to is for data centers like those enterprise data storage centers for business.
-
The 2 TB Hard Disk PCB and up to 4TB can be used in computers, when there is a need for massive data storage.
Hard Disk PCB By Board Characteristics (6)
-
Most definitely, Rigid PCBs are the preferred board type for computer, because it guarantees consistent performance.
-
Because the Hard Disk PCB is mechanically expected to be strong, it utilizes Through hole or non-plated through hole.
-
A common favored weight for PCB is 1 oz, which is adequate for PC or computers, usually HASL is applied.
-
Because AOI is so prevalent in Computer PCBs, we always find it beneficial to inspect using Green PCBs.
-
We are capable of producing Multilayer PCBs. We can provide the PCB Layers required to fully meet your business needs.
-
When Immersion Gold PCB is the option you get, there’s a longer life span expected for your part.
Hard Disk PCB Spells PC Success
We guarantee that the various components in the Hard Disk are properly positioned.
This ensures that nothing is misplaced and that everything runs smoothly.
Our product aims to be compatible with the Hard Disk PCB when used in high-power ones with fast rotational speeds.
Because we understand that the PCB should always be computer-compatible, we will assist you in any way to achieve your end goal.
Production of Hard Disk PCB
Although the Hard Disk PCB is related to the SSD, it is not the same item.
Recent years have seen the popular usage of SSD, and a decline of Hard Disk and HDD PCBs.
But there are still people who use Hard Disk products. For these customers, we dedicate out Hard Disk or Hard Drive PCBs.
We will not use professionals who are not experienced and skilled in PCB fabrication.
We only want the best PCBs rolled out for you.
Good Part for Computer Modification
You must have a good part for computer modification.
When your PCB fails and you require a replacement hard drive for installation.
That is when you require a tough Hard Disk PCB from us.
The electronics industry is saturated with below par manufacturers. But differentiate us from them.
Not only do we communicate in English so you can understand, we also do so in your timeline.
So, kindly, drop us a line now.
Ensure Optimal Power Compatibility
The correct firmware is a critical aspect of the Hard Disk PCB specification.
Our world-class facility in China is well-organized and in excellent condition.
We are also a major supplier to global brands.
These companies rely on us to create the circuit boards that go inside their high-tech devices.
Relax and let PCBTok handle all of your PCB needs, not just for hard drives–
But also for motherboards, laptops, keyboards, mouse, and other computer-related products.
Hard Disk PCB Fabrication
PCBTok employs experienced professionals to carefully examine each phase of the process to ensure an error-free output when producing your Hard Disk PCB.
This will allow you to maximize the potential of your products.
PCBTok ensures that your PCBs produce excellent results.
Furthermore, we are RoHS compliant for marketing items in the UK and EU-member countries.
We have extensive PCB industry experience, so you can trust us.
This PCB is designed to make your PC memory perform at the optimum condition.
We take our PCBs—all of them—to very best level by being strict with PCB testing.
We’re doing all of this to ensure that the PCB byproduct is precisely what it should be and performs as expected
We respond quickly to your inquiries, leaving no questions unanswered.
Just inquire and we will be there for you.
OEM & ODM Hard Disk Applications
The desktop computer is still indispensable not just at work, but at home settings. You will need a PCB to outfit it.
The mobile device is sometimes used as a computer. You’ll need PCB to set it up too, even if there are only a few of these with hard drives.
The Data Storage Center is the best example of why you need hard drives even in the advent of SSD and flash memory devices.
Video applications, which make extensive use of memory, are the best example of why hard drives are required even when flash memory devices are available.
It is necessary to store a large amount of data for gaming purposes. Some players want it, so they order our hard drive PCBs.
Hard Disk PCB Production Details As Following Up
- Production Facility
- PCB Capabilities
- Shipping Method
- Payment Methods
- Send Us Inquiry
| NO | Item | Technical Specification | ||||||
| Standard | Advanced | |||||||
| 1 | Layer Count | 1-20 layers | 22-40 layer | |||||
| 2 | Base Material | KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) | ||||||
| 3 | PCB Type | Rigid PCB/FPC/Flex-Rigid | Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. | |||||
| 4 | Lamination type | Blind&buried via type | Mechanical blind&burried vias with less than 3 times laminating | Mechanical blind&burried vias with less than 2 times laminating | ||||
| HDI PCB | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | ||||||
| 5 | Finished Board Thickness | 0.2-3.2mm | 3.4-7mm | |||||
| 6 | Minimum Core Thickness | 0.15mm(6mil) | 0.1mm(4mil) | |||||
| 7 | Copper Thickness | Min. 1/2 OZ, Max. 4 OZ | Min. 1/3 OZ, Max. 10 OZ | |||||
| 8 | PTH Wall | 20um(0.8mil) | 25um(1mil) | |||||
| 9 | Maximum Board Size | 500*600mm(19”*23”) | 1100*500mm(43”*19”) | |||||
| 10 | Hole | Min laser drilling size | 4mil | 4mil | ||||
| Max laser drilling size | 6mil | 6mil | ||||||
| Max aspect ratio for Hole plate | 10:1（hole diameter＞8mil） | 20:1 | ||||||
| Max aspect ratio for laser via filling plating | 0.9:1(Depth included copper thickness) | 1:1(Depth included copper thickness) | ||||||
| Max aspect ratio for mechanical depth- control drilling board(Blind hole drilling depth/blind hole size) |
0.8:1(drilling tool size≥10mil) | 1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil) | ||||||
| Min. depth of Mechanical depth-control(back drill) | 8mil | 8mil | ||||||
| Min gap between hole wall and conductor (None blind and buried via PCB) |
7mil(≤8L),9mil(10-14L),10mil(＞14L) | 5.5mil(≤8L),6.5mil(10-14L),7mil(＞14L) | ||||||
| Min gap between hole wall conductor (Blind and buried via PCB) | 8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating) | 7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating) | ||||||
| Min gab between hole wall conductor(Laser blind hole buried via PCB) | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | ||||||
| Min space between laser holes and conductor | 6mil | 5mil | ||||||
| Min space between hole walls in different net | 10mil | 10mil | ||||||
| Min space between hole walls in the same net | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | ||||||
| Min space bwteen NPTH hole walls | 8mil | 8mil | ||||||
| Hole location tolerance | ±2mil | ±2mil | ||||||
| NPTH tolerance | ±2mil | ±2mil | ||||||
| Pressfit holes tolerance | ±2mil | ±2mil | ||||||
| Countersink depth tolerance | ±6mil | ±6mil | ||||||
| Countersink hole size tolerance | ±6mil | ±6mil | ||||||
| 11 | Pad(ring) | Min Pad size for laser drillings | 10mil(for 4mil laser via),11mil(for 5mil laser via) | 10mil(for 4mil laser via),11mil(for 5mil laser via) | ||||
| Min Pad size for mechanical drillings | 16mil(8mil drillings) | 16mil(8mil drillings) | ||||||
| Min BGA pad size | HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold) | HASL:10mil, LF HASL:12mil, other surface technics are 7mi | ||||||
| Pad size tolerance(BGA) | ±1.5mil(pad size≤10mil);±15%(pad size>10mil) | ±1.2mil(pad size≤12mil);±10%(pad size≥12mil) | ||||||
| 12 | Width/Space | Internal Layer | 1/2OZ：3/3mil | 1/2OZ：3/3mil | ||||
| 1OZ: 3/4mil | 1OZ: 3/4mil | |||||||
| 2OZ: 4/5.5mil | 2OZ: 4/5mil | |||||||
| 3OZ: 5/8mil | 3OZ: 5/8mil | |||||||
| 4OZ: 6/11mil | 4OZ: 6/11mil | |||||||
| 5OZ: 7/14mil | 5OZ: 7/13.5mil | |||||||
| 6OZ: 8/16mil | 6OZ: 8/15mil | |||||||
| 7OZ: 9/19mil | 7OZ: 9/18mil | |||||||
| 8OZ: 10/22mil | 8OZ: 10/21mil | |||||||
| 9OZ: 11/25mil | 9OZ: 11/24mil | |||||||
| 10OZ: 12/28mil | 10OZ: 12/27mil | |||||||
| External Layer | 1/3OZ：3.5/4mil | 1/3OZ：3/3mil | ||||||
| 1/2OZ：3.9/4.5mil | 1/2OZ：3.5/3.5mil | |||||||
| 1OZ: 4.8/5mil | 1OZ: 4.5/5mil | |||||||
| 1.43OZ（positive）:4.5/7 | 1.43OZ（positive）:4.5/6 | |||||||
| 1.43OZ（negative ）:5/8 | 1.43OZ（negative ）:5/7 | |||||||
| 2OZ: 6/8mil | 2OZ: 6/7mil | |||||||
| 3OZ: 6/12mil | 3OZ: 6/10mil | |||||||
| 4OZ: 7.5/15mil | 4OZ: 7.5/13mil | |||||||
| 5OZ: 9/18mil | 5OZ: 9/16mil | |||||||
| 6OZ: 10/21mil | 6OZ: 10/19mil | |||||||
| 7OZ: 11/25mil | 7OZ: 11/22mil | |||||||
| 8OZ: 12/29mil | 8OZ: 12/26mil | |||||||
| 9OZ: 13/33mil | 9OZ: 13/30mil | |||||||
| 10OZ: 14/38mil | 10OZ: 14/35mil | |||||||
| 13 | Dimension Tolerance | Hole Position | 0.08 ( 3 mils) | |||||
| Conductor Width(W) | 20% Deviation of Master A/W |
1mil Deviation of Master A/W |
||||||
| Outline Dimension | 0.15 mm ( 6 mils) | 0.10 mm ( 4 mils) | ||||||
| Conductors & Outline ( C – O ) |
0.15 mm ( 6 mils) | 0.13 mm ( 5 mils) | ||||||
| Warp and Twist | 0.75% | 0.50% | ||||||
| 14 | Solder Mask | Max drilling tool size for via filled with Soldermask (single side) | 35.4mil | 35.4mil | ||||
| Soldermask color | Green, Black, Blue, Red, White, Yellow,Purple matte/glossy | |||||||
| Silkscreen color | White, Black,Blue,Yellow | |||||||
| Max hole size for via filled with Blue glue aluminium | 197mil | 197mil | ||||||
| Finish hole size for via filled with resin | 4-25.4mil | 4-25.4mil | ||||||
| Max aspect ratio for via filled with resin board | 8:1 | 12:1 | ||||||
| Min width of soldermask bridge | Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area) | |||||||
| Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other color,extremity 3.5mil) , 8mil( on copper area |
||||||||
| Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area) | ||||||||
| Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area) | ||||||||
| Base copper 2 oz-4 oz: 6mil, 8mil( on copper area) | ||||||||
| 15 | Surface Treatment | Lead free | Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge | |||||
| Leaded | Leaded HASL | |||||||
| Aspect ratio | 10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) | |||||||
| Max finished size | HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″； | |||||||
| Min finished size | HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″； | |||||||
| PCB thickness | HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm | |||||||
| Max high to gold finger | 1.5inch | |||||||
| Min space between gold fingers | 6mil | |||||||
| Min block space to gold fingers | 7.5mil | |||||||
| 16 | V-Cutting | Panel Size | 500mm X 622 mm ( max. ) | 500mm X 800 mm ( max. ) | ||||
| Board Thickness | 0.50 mm (20mil) min. | 0.30 mm (12mil) min. | ||||||
| Remain Thickness | 1/3 board thickness | 0.40 +/-0.10mm( 16+/-4 mil ) | ||||||
| Tolerance | ±0.13 mm(5mil) | ±0.1 mm(4mil) | ||||||
| Groove Width | 0.50 mm (20mil) max. | 0.38 mm (15mil) max. | ||||||
| Groove to Groove | 20 mm (787mil) min. | 10 mm (394mil) min. | ||||||
| Groove to Trace | 0.45 mm(18mil) min. | 0.38 mm(15mil) min. | ||||||
| 17 | Slot | Slot size tol.L≥2W | PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil) | PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil) | ||||
| NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil) | NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil) | |||||||
| 18 | Min Spacing from hole edge to hole edge | 0.30-1.60 (Hole Diameter) | 0.15mm(6mil) | 0.10mm(4mil) | ||||
| 1.61-6.50 (Hole Diameter) | 0.15mm(6mil) | 0.13mm(5mil) | ||||||
| 19 | Min spacing between hole edge to circuitry pattern | PTH hole: 0.20mm(8mil) | PTH hole: 0.13mm(5mil) | |||||
| NPTH hole: 0.18mm(7mil) | NPTH hole: 0.10mm(4mil) | |||||||
| 20 | Image transfer Registration tol | Circuit pattern vs.index hole | 0.10(4mil) | 0.08(3mil) | ||||
| Circuit pattern vs.2nd drill hole | 0.15(6mil) | 0.10(4mil) | ||||||
| 21 | Registration tolerance of front/back image | 0.075mm(3mil) | 0.05mm(2mil) | |||||
| 22 | Multilayers | Layer-layer misregistration | 4layers: | 0.15mm(6mil)max. | 4layers: | 0.10mm(4mil) max. | ||
| 6layers: | 0.20mm(8mil)max. | 6layers: | 0.13mm(5mil) max. | |||||
| 8layers: | 0.25mm(10mil)max. | 8layers: | 0.15mm(6mil) max. | |||||
| Min. Spacing from Hole Edge to Innerlayer Pattern | 0.225mm(9mil) | 0.15mm(6mil) | ||||||
| Min.Spacing from Outline to Innerlayer Pattern | 0.38mm(15mil) | 0.225mm(9mil) | ||||||
| Min. board thickness | 4layers:0.30mm(12mil) | 4layers:0.20mm(8mil) | ||||||
| 6layers:0.60mm(24mil) | 6layers:0.50mm(20mil) | |||||||
| 8layers:1.0mm(40mil) | 8layers:0.75mm(30mil) | |||||||
| Board thickness tolerance | 4layers:+/-0.13mm(5mil) | 4layers:+/-0.10mm(4mil) | ||||||
| 6layers:+/-0.15mm(6mil) | 6layers:+/-0.13mm(5mil) | |||||||
| 8-12 layers:+/-0.20mm (8mil) | 8-12 layers:+/-0.15mm (6mil) | |||||||
| 23 | Insulation Resistance | 10KΩ~20MΩ(typical:5MΩ) | ||||||
| 24 | Conductivity | <50Ω(typical:25Ω) | ||||||
| 25 | Test voltage | 250V | ||||||
| 26 | Impedance control | ±5ohm(＜50ohm), ±10%(≥50ohm) | ||||||
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
1. DHL
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
2. UPS
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
3. TNT
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
4. FedEx
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
