Hard Drive PCB by PCBTok is Professionally Constructed
Due to our commitment to providing our customers with only the highest-quality Hard Drive PCBs that can handle practically all applications. PCBTok is a well-known PCB manufacturer all over the world.
- About 500 individuals are employed in our processing facility.
- Per week, you’ll get an update on the status of your PCB orders.
- We offer 24/7 availability of professional assistance.
- Each file is thoroughly inspected by CAM before manufacturing.
- Completely accredited and in possession of the required US and Canadian certificates.
PCBTok's Finest Hard Drive PCB Items
We only produce top-notch Hard Drive PCB products in the market; we always make sure that they can satisfy the needs of our consumers without causing any issues.
Our dedication has brought us numerous praises across the globe. All of our products are surely made using high-grade raw resources to guarantee they will perform best.
These are all made possible through the help of our experienced and highly-skilled experts that continuously ensure that your products are flawless.
PCBTok always aims to provide value to its consumers.
We continuously thrive to provide the greatest service and outstanding products for the benefit of our customer’s specifications and applications.
Hard Drive PCB By Feature
Hard Drive PCB By Mode of Assembly (5)
Hard Drive PCB By Type of Material (6)
Primary Components of Assembled Hard Drive PCB
It is regarded that a Hard Drive PCB is crucial in the signal transmission of a computer. In addition, it could act as storage. Here are some of its components:
- BIOS Chip – It aids in the start-up operations of a computer or laptop.
- Crystal Oscillator – It is responsible for creating electrical signals at a constant frequency.
- TVS Diode – It acts as a protector of semiconductor components again high-voltage transients.
- Resistor – It limits the flow of electric current.
- Capacitor – It stores electrostatic energy.
- Cache Chip, Controller Integrated Circuit, and Motor Controller.
Advantages of Hard Drive PCB
The following are the crucial benefits of a Hard Drive PCB:
- Data Storage – It has an efficient mechanism to properly store data in electronic devices.
- Repair – It can easily be repaired compared to other PCBs.
- Firmware Transfer – Its process is fairly easy to perform.
- Recovery – In terms of lost data, it can easily restore.
- Operation – Due to its moisture-resistant feature, it is highly operative.
- Thermal Drainage – It has an exceptional system.
- Storage – Even without power, it can store information for around 2-3 years.
Disadvantages of a Hard Drive PCB
Despite its several benefits, it has its limitations. Here is some of it:
- Burning Issues – Due to its excessive current flow, it is prone to heating concerns. However, choosing the right manufacturer can prevent this.
- Cost – In comparison to other types of PCBs, they can be expensive to manufacture. Nevertheless, with us, we can provide you best deals we have.
- Complexity – In terms of designing the board in advanced applications in some cases, it can be difficult to perform.
Nonetheless, all of these limitations can be prevented by choosing the right manufacturer that only deploys high-grade types of materials.
Producing Noteworthy Hard Drive PCB is Strength of PCBTok
Our more than a decade of industry experience and providing top-tier PCB products in the market have gained us a tremendous amount of respect and commendation worldwide. We do not plan to stop in providing our consumers with only the best items we have.
Furthermore, we can provide you with affordable and best deals for any type of Hard Drive PCB. However, we will make sure that it will still be of its highest quality.
We always make sure that our products have undergone RoHS, IPC, and other quality tests to guarantee their performance. In addition, we provide comprehensive technical support and customer service relating to your ordered PCBs.
All of our Hard Drive PCB and other PCB products are genuinely crafted using quality raw materials to guarantee that they will perform up to their optimum level.
Contact us today to avail our best deals!
Hard Drive PCB Fabrication
In terms of mounting method, we highly suggest the SMT component method for this particular board; it is the way more efficient procedure.
One of the benefits of this method is its exceptional solderability, and it has outstanding thermal management performance.
We strongly suggest going for this particular mounting method than THT since it is way cheaper and more effective in carrying high current loads.
In addition, we can perform the SMD method since it only takes a smaller surface. Hence, there’s more than enough room in integrating surface vias.
If you require additional information regarding this matter, kindly message us.
There is a variety of reasons affecting the lifespan of Hard Drive PCB. It includes heat dissipation, current load, materials, and other factors.
Nonetheless, you can utilize it for around three (3) to five (5) years on average. In addition, it can be more if properly taken care of.
Furthermore, we recommend choosing the right manufacturer to ensure that it will last longer than its average lifespan.
Additionally, we can apply a waterproofing method for your board to add a protection layer against water and moisture that can affect its lifespan.
Inquire today to have in-depth knowledge of its lifespan capabilities.
OEM & ODM Hard Drive PCB Applications
Hard Drive PCB Production Details As Following Up
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“Despite the distance that I had with PCBTok, they delivered my Hard Drive PCB products on time without any delays and without causing me any troubles. It was such a stress-free experience transacting with them. I’ll be forever grateful to them for making all my concepts into reality; all of my specifications and requirements were met without any issues. I’d like to thank the people who assisted me as well because, without them, my transaction with PCBTok wouldn’t be successful. Thank you so much for your work, PCBTok! I greatly appreciate it.”Kyle Coleman, Electronics Technician from Frankfort, Kentucky
“It was such a valuable experience dealing with PCBTok; they have the most respectful and knowledgeable staff. I’ve encountered some issues regarding my PCB design, and they assisted me right away in fixing them; they prevented me from losing a huge sum of money for repair costs. Without the initiative of their personnel, my manager would definitely nag at me. I highly suggest you try PCBTok for your rush orders; they will surely work it out right away without sacrificing the quality of your orders. I plan on purchasing again from them for my future projects; their works are great and flawless.”Connor Todd, Project Engineer from Montpelier, Vermont
“After careful consideration on purchasing from PCBTok, I finally decided to order from them. Thankfully, I did the right choice. I purchased it in bulk, and they provided me with sample pieces before they mass-manufactured them to make sure that I didn’t commit any mistakes while designing the board. This helped me a lot in reducing future repair costs because I really found some errors with the design. They really great help with my project specifications; they are a much-recommended manufacturer in China. If you’re still struggling with where to purchase quality boards, go for PCBTok, they are always there to support your orders and projects.”Cody Nelson, Design Engineer from Wolverhampton, England