Change Language
The Dedicated High Current PCB Supplier
If you’re looking for a PCB that is extremely well-built and performs well, look no further than PCBTok.
This type of PCB is best suited for high-power devices.
Because we care about quality, we guarantee 100% inspection (PCB testing).
Raw materials can vary according to your specs and are always readily available.
We can distribute sample products before you go ahead with a large purchase.
Gives You the Best Performance
PCBTok’s main goal is to provide you with flawless PCB items, so we always guarantee that our products meet all standard guidelines.
Serving you with the best customer service possible is an essential component of providing you with any satisfying PCB-related item-
Including the High Current PCB.
We are available 24 hours a day, seven days a week to help you, for your advantage.
For clients who require this type of PCB, proper PCB Tracing/ PCB Layout placement is very important.
That is exactly what we promise to do.
High Current PCB By Usage
This type of PCB is required when converting DC to AC with the generated solar power energy from panels.
This type of PCB is used in some power amplifier modules. It can handle up to 10 A of current and is hybrid and modular.
Transformers are used in power applications, particularly open type transformers with outputs of up to 10 kA breaking rate.
This type of Adaptor PCB is required to deliver up to 4A current and allow you to easily plug and use your device.
Because electric vehicles (EVs) operate on low voltage and high current, the controller’s current level must be controlled and precise.
It is a PCB used in a High Voltage Direct Current PCB, also called HVDC, or a power superhighway. It allows for a huge amount of power to be carried.
High Current PCB by Feature (5)
-
A high voltage PCB is not always synonymous with a high current PCB. Transformers, for example, can serve both functions.
-
Heavy Copper PCB, like 10 oz copper PCB, can withstand high current as well as the temperature demands that come with it.
-
High Power PCB is interchangeable with High Current PCB. Maximum current must be considered when designing the PCB trace.
-
LED lights, transformer PCBs, and converters can all be used with the Power Supply PCB. Thick copper/high TG are often selected.
-
Power PCBs like this one are in high demand in the industrial control use, e.g. those producing semiconductors.
High Current PCB by Board Type (5)
-
You can accomplish a lot with a Multilayer PCB. The proper amount of voltage and resistance ensures the current flow in your board.
-
Rigid PCBs ensure consistent product performance. We incorporate PCB circuit breakers into large or thick copper PCBs.
-
FR4 PCB meets standard regulations for use in power situations, even when dealing with high current values, such as in motor inrush.
-
Because you can still comply with Lead-free PCB guidelines and regulations, ENIG PCB is considered a gold standard of surface finishes.
-
Customized PCBs can accommodate whatever rated values you require them to operate in, preventing shorting and overcurrent.
Possibilities With Our PCB
PCBTok’s PCBs are thoroughly tested throughout the manufacturing process before being dispatched.
This is in order to eliminate errors, and to ensure there are no mistakes occurring.
After securing your peace of mind, let’s talk about the possibilities of using this type of board. The following are applicable:
Power plants, power amplifiers, AC/DC converters (high voltage capacity), MOSFET, and especially, IGBT.
If you order from PCBTok, your High Current PCB is guaranteed to be fully operational.
Well-Constructed Heavy Capacity PCBs
We have been doing this for more than twelve years.
During this time span, we have produced many types of high power/ high voltage/ high capacity of current carrying PCBs.
Thousands of satisfied customers all over the world can attest to this.
We believe in building our company with honesty and integrity.
So, we will never give you any sub-par products.
You can trust us to deliver your PCBs on time and in good shape.
Specifically Designing the High Current PCB
This type of PCB must be well-designed in order for safe grounding strategies to be implemented.
Duly, the following must be secured: 3-wire DC system, grounding, trace and PCB schematics.
We have always believed that the security of our customers with our products serves as our brand.
A constant source of motivation for us to improve is your feedback.
As a result, you can always contact us for more details if you need it.
PCBTok Optimizes Your Power Device
When building a PCB for power applications there are several important specifics.
We help your business grow by providing excellent PCBs.
PCBTok provides high-quality electronics at a reasonable price.
It is made of a flame-resistant material that will keep you safe.
Because we care about you, all High Current PCBs we manufacture must be of high quality for all customers who purchase them.
By following accepted standards, we help you with your business growth.
Place your order now!
High Current PCB Fabrication
Our PCBs are made with well-known materials to ensure the following:
- Safeguard against accidental grounding
- Outdoor protection against lightning strikes
- Keep workers safe from electrocution if they come into contact with it
- Regulate/ control the flow of electricity
- Complete the idealized power switch/transition
If you order from PCBTok, your product will undoubtedly be excellent.
The end result of buying High Current PCB is safety when used with power-related gadgets.
To achieve this, your PCB designer must consider the heat factors thoroughly.
What Tg is needed, for example, for the raw materials?
The answer to this is crucial, as important as the layout.
OEM & ODM High Current PCB Applications
Power considerations must be considered when maximizing space and device memory in a mobile device for telecom.
A section of our OEM product line is dedicated to computer PCBs. Motherboard PCBs are considered standard items.
Power Grid and power distribution require PCBs that can handle both high current and high voltage. Because power lines carry both high voltages ang high current loads.
PCBs working in military settings must be exceptional and withstand heavy duty use, even in deserts.
Because of the push toward electric vehicles, automotives require high current specs. It is advocated to raise the voltage level in order to maximize battery utilization.
High Current PCB Production Details As Following Up
- Production Facility
- PCB Capabilities
- Shipping Method
- Payment Methods
- Send Us Inquiry
| NO | Item | Technical Specification | ||||||
| Standard | Advanced | |||||||
| 1 | Layer Count | 1-20 layers | 22-40 layer | |||||
| 2 | Base Material | KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) | ||||||
| 3 | PCB Type | Rigid PCB/FPC/Flex-Rigid | Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. | |||||
| 4 | Lamination type | Blind&buried via type | Mechanical blind&burried vias with less than 3 times laminating | Mechanical blind&burried vias with less than 2 times laminating | ||||
| HDI PCB | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | ||||||
| 5 | Finished Board Thickness | 0.2-3.2mm | 3.4-7mm | |||||
| 6 | Minimum Core Thickness | 0.15mm(6mil) | 0.1mm(4mil) | |||||
| 7 | Copper Thickness | Min. 1/2 OZ, Max. 4 OZ | Min. 1/3 OZ, Max. 10 OZ | |||||
| 8 | PTH Wall | 20um(0.8mil) | 25um(1mil) | |||||
| 9 | Maximum Board Size | 500*600mm(19”*23”) | 1100*500mm(43”*19”) | |||||
| 10 | Hole | Min laser drilling size | 4mil | 4mil | ||||
| Max laser drilling size | 6mil | 6mil | ||||||
| Max aspect ratio for Hole plate | 10:1（hole diameter＞8mil） | 20:1 | ||||||
| Max aspect ratio for laser via filling plating | 0.9:1(Depth included copper thickness) | 1:1(Depth included copper thickness) | ||||||
| Max aspect ratio for mechanical depth- control drilling board(Blind hole drilling depth/blind hole size) |
0.8:1(drilling tool size≥10mil) | 1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil) | ||||||
| Min. depth of Mechanical depth-control(back drill) | 8mil | 8mil | ||||||
| Min gap between hole wall and conductor (None blind and buried via PCB) |
7mil(≤8L),9mil(10-14L),10mil(＞14L) | 5.5mil(≤8L),6.5mil(10-14L),7mil(＞14L) | ||||||
| Min gap between hole wall conductor (Blind and buried via PCB) | 8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating) | 7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating) | ||||||
| Min gab between hole wall conductor(Laser blind hole buried via PCB) | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | ||||||
| Min space between laser holes and conductor | 6mil | 5mil | ||||||
| Min space between hole walls in different net | 10mil | 10mil | ||||||
| Min space between hole walls in the same net | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | ||||||
| Min space bwteen NPTH hole walls | 8mil | 8mil | ||||||
| Hole location tolerance | ±2mil | ±2mil | ||||||
| NPTH tolerance | ±2mil | ±2mil | ||||||
| Pressfit holes tolerance | ±2mil | ±2mil | ||||||
| Countersink depth tolerance | ±6mil | ±6mil | ||||||
| Countersink hole size tolerance | ±6mil | ±6mil | ||||||
| 11 | Pad(ring) | Min Pad size for laser drillings | 10mil(for 4mil laser via),11mil(for 5mil laser via) | 10mil(for 4mil laser via),11mil(for 5mil laser via) | ||||
| Min Pad size for mechanical drillings | 16mil(8mil drillings) | 16mil(8mil drillings) | ||||||
| Min BGA pad size | HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold) | HASL:10mil, LF HASL:12mil, other surface technics are 7mi | ||||||
| Pad size tolerance(BGA) | ±1.5mil(pad size≤10mil);±15%(pad size>10mil) | ±1.2mil(pad size≤12mil);±10%(pad size≥12mil) | ||||||
| 12 | Width/Space | Internal Layer | 1/2OZ：3/3mil | 1/2OZ：3/3mil | ||||
| 1OZ: 3/4mil | 1OZ: 3/4mil | |||||||
| 2OZ: 4/5.5mil | 2OZ: 4/5mil | |||||||
| 3OZ: 5/8mil | 3OZ: 5/8mil | |||||||
| 4OZ: 6/11mil | 4OZ: 6/11mil | |||||||
| 5OZ: 7/14mil | 5OZ: 7/13.5mil | |||||||
| 6OZ: 8/16mil | 6OZ: 8/15mil | |||||||
| 7OZ: 9/19mil | 7OZ: 9/18mil | |||||||
| 8OZ: 10/22mil | 8OZ: 10/21mil | |||||||
| 9OZ: 11/25mil | 9OZ: 11/24mil | |||||||
| 10OZ: 12/28mil | 10OZ: 12/27mil | |||||||
| External Layer | 1/3OZ：3.5/4mil | 1/3OZ：3/3mil | ||||||
| 1/2OZ：3.9/4.5mil | 1/2OZ：3.5/3.5mil | |||||||
| 1OZ: 4.8/5mil | 1OZ: 4.5/5mil | |||||||
| 1.43OZ（positive）:4.5/7 | 1.43OZ（positive）:4.5/6 | |||||||
| 1.43OZ（negative ）:5/8 | 1.43OZ（negative ）:5/7 | |||||||
| 2OZ: 6/8mil | 2OZ: 6/7mil | |||||||
| 3OZ: 6/12mil | 3OZ: 6/10mil | |||||||
| 4OZ: 7.5/15mil | 4OZ: 7.5/13mil | |||||||
| 5OZ: 9/18mil | 5OZ: 9/16mil | |||||||
| 6OZ: 10/21mil | 6OZ: 10/19mil | |||||||
| 7OZ: 11/25mil | 7OZ: 11/22mil | |||||||
| 8OZ: 12/29mil | 8OZ: 12/26mil | |||||||
| 9OZ: 13/33mil | 9OZ: 13/30mil | |||||||
| 10OZ: 14/38mil | 10OZ: 14/35mil | |||||||
| 13 | Dimension Tolerance | Hole Position | 0.08 ( 3 mils) | |||||
| Conductor Width(W) | 20% Deviation of Master A/W |
1mil Deviation of Master A/W |
||||||
| Outline Dimension | 0.15 mm ( 6 mils) | 0.10 mm ( 4 mils) | ||||||
| Conductors & Outline ( C – O ) |
0.15 mm ( 6 mils) | 0.13 mm ( 5 mils) | ||||||
| Warp and Twist | 0.75% | 0.50% | ||||||
| 14 | Solder Mask | Max drilling tool size for via filled with Soldermask (single side) | 35.4mil | 35.4mil | ||||
| Soldermask color | Green, Black, Blue, Red, White, Yellow,Purple matte/glossy | |||||||
| Silkscreen color | White, Black,Blue,Yellow | |||||||
| Max hole size for via filled with Blue glue aluminium | 197mil | 197mil | ||||||
| Finish hole size for via filled with resin | 4-25.4mil | 4-25.4mil | ||||||
| Max aspect ratio for via filled with resin board | 8:1 | 12:1 | ||||||
| Min width of soldermask bridge | Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area) | |||||||
| Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other color,extremity 3.5mil) , 8mil( on copper area |
||||||||
| Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area) | ||||||||
| Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area) | ||||||||
| Base copper 2 oz-4 oz: 6mil, 8mil( on copper area) | ||||||||
| 15 | Surface Treatment | Lead free | Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge | |||||
| Leaded | Leaded HASL | |||||||
| Aspect ratio | 10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) | |||||||
| Max finished size | HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″； | |||||||
| Min finished size | HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″； | |||||||
| PCB thickness | HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm | |||||||
| Max high to gold finger | 1.5inch | |||||||
| Min space between gold fingers | 6mil | |||||||
| Min block space to gold fingers | 7.5mil | |||||||
| 16 | V-Cutting | Panel Size | 500mm X 622 mm ( max. ) | 500mm X 800 mm ( max. ) | ||||
| Board Thickness | 0.50 mm (20mil) min. | 0.30 mm (12mil) min. | ||||||
| Remain Thickness | 1/3 board thickness | 0.40 +/-0.10mm( 16+/-4 mil ) | ||||||
| Tolerance | ±0.13 mm(5mil) | ±0.1 mm(4mil) | ||||||
| Groove Width | 0.50 mm (20mil) max. | 0.38 mm (15mil) max. | ||||||
| Groove to Groove | 20 mm (787mil) min. | 10 mm (394mil) min. | ||||||
| Groove to Trace | 0.45 mm(18mil) min. | 0.38 mm(15mil) min. | ||||||
| 17 | Slot | Slot size tol.L≥2W | PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil) | PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil) | ||||
| NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil) | NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil) | |||||||
| 18 | Min Spacing from hole edge to hole edge | 0.30-1.60 (Hole Diameter) | 0.15mm(6mil) | 0.10mm(4mil) | ||||
| 1.61-6.50 (Hole Diameter) | 0.15mm(6mil) | 0.13mm(5mil) | ||||||
| 19 | Min spacing between hole edge to circuitry pattern | PTH hole: 0.20mm(8mil) | PTH hole: 0.13mm(5mil) | |||||
| NPTH hole: 0.18mm(7mil) | NPTH hole: 0.10mm(4mil) | |||||||
| 20 | Image transfer Registration tol | Circuit pattern vs.index hole | 0.10(4mil) | 0.08(3mil) | ||||
| Circuit pattern vs.2nd drill hole | 0.15(6mil) | 0.10(4mil) | ||||||
| 21 | Registration tolerance of front/back image | 0.075mm(3mil) | 0.05mm(2mil) | |||||
| 22 | Multilayers | Layer-layer misregistration | 4layers: | 0.15mm(6mil)max. | 4layers: | 0.10mm(4mil) max. | ||
| 6layers: | 0.20mm(8mil)max. | 6layers: | 0.13mm(5mil) max. | |||||
| 8layers: | 0.25mm(10mil)max. | 8layers: | 0.15mm(6mil) max. | |||||
| Min. Spacing from Hole Edge to Innerlayer Pattern | 0.225mm(9mil) | 0.15mm(6mil) | ||||||
| Min.Spacing from Outline to Innerlayer Pattern | 0.38mm(15mil) | 0.225mm(9mil) | ||||||
| Min. board thickness | 4layers:0.30mm(12mil) | 4layers:0.20mm(8mil) | ||||||
| 6layers:0.60mm(24mil) | 6layers:0.50mm(20mil) | |||||||
| 8layers:1.0mm(40mil) | 8layers:0.75mm(30mil) | |||||||
| Board thickness tolerance | 4layers:+/-0.13mm(5mil) | 4layers:+/-0.10mm(4mil) | ||||||
| 6layers:+/-0.15mm(6mil) | 6layers:+/-0.13mm(5mil) | |||||||
| 8-12 layers:+/-0.20mm (8mil) | 8-12 layers:+/-0.15mm (6mil) | |||||||
| 23 | Insulation Resistance | 10KΩ~20MΩ(typical:5MΩ) | ||||||
| 24 | Conductivity | <50Ω(typical:25Ω) | ||||||
| 25 | Test voltage | 250V | ||||||
| 26 | Impedance control | ±5ohm(＜50ohm), ±10%(≥50ohm) | ||||||
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
1. DHL
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
2. UPS
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
3. TNT
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
4. FedEx
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
