Proficiency With IT180 Materials
This type of laminate and prepreg is popular for high-frequency PCBs. It is a PCB material that is designed to withstand higher-than-average frequencies.
These are frequently used in applications that require unique signal propagation between devices.
When a PCB emits extremely high-frequency signals, customers would usually order an impedance control type of board to keep the device from corrupting.
This contributes balance performance on the overall.
One Solution for Your PCB Needs
PCBTok has a long history of producing PCBs.
We have been producing high-quality boards, particularly Multilayer PCBs made of the FR4 material.
One of these materials is the IT180, which has high Tg.
The performance of our PCB is dependent on proper PCB design, which we can help you with.
So, choose us as your all-in-one PCB supplier for any circuit board products.
Because of our extended manufacturing capabilities, we can provide affordable rates.
We manufacture a variety of PCBs as stated in your Gerber file.
IT180 PCB By Feature
We have customers who require High TG PCB for aerospace and computer (24/7) applications.
A low CTE is a feature that protects this board from delamination. The given range is from 40°C to 125°C.
If the material is not CAF-resistant, an electrochemical failure happens. This is why the board we created attempts to prevent it.
In terms of PCB stack-ups, the highest-frequency laminate corresponds to high-Tg PCB requirements.
Although low-loss PCB is sometimes preferred, Standard Loss PCB is sufficient for PCBs that do not handle RF frequency.
This Rigid PCB material is best used at high frequencies. This board can withstand temperatures of 175 degrees Celsius.
IT180 PCB By Layer (5)
IT180 PCB By Surface Finish & Appearance (5)
Performance Maxed with IT180 PCB
We will gladly show you that we have what it takes to be your PCB manufacturer.
Our facilities are spotless, well-kept, and updated.
We use this material in accordance with the most recent international standards for the handling of PCBs.
Not only that, but our employees are well-versed in all aspects of high-volume circuit board manufacturing.
Make the wise choice and order PCB from us right away!

Well-Versed in IT180 PCB Manufacture
To produce quality and useful products, strict guidelines or procedures must be followed when constructing these PCBs.
Having said that, we used procedures and components and observed as a result.
To ensure our competence, we perform the following tests:
Automated Optical Inspection (AOI), Hole Resistance Test, Fixture Test, and Impedance Test.
If you require any additional information, please contact us here.
We will gladly provide the information for your peace of mind.
Your Benefits in Using IT180
This type of PCB, like any other PCB, has its own advantages.
The following are just a few of them, but the most important ones you can get from our IT180 PCB:
It is optimal when used for PCBs with a high layer count.
It is reasonably priced, compared to other High Tg or High Frequency materials
They are also built for high performance.
Lastly, resistance to high temperatures is made easy.

PCBTok’s IT180 PCB Fits Your Strict Guidelines


When building PCBs of any kind, there are numerous factors to consider.
Fortunately, PCBTok is trained and highly skilled in this area.
We are already familiar with the assembly procedure due to decade-long of experience.
Using the ITEQ laminate and prepreg like this one is just one of our expert skills.
If you want your PCB to be top-of-the-line, well-taken care of during the manufacturing process-
PCBTok’s products are the best options for you in the market.
IT180 PCB Fabrication
Our PCBs are all handled with care whenever they are the ones for High-Frequency usage. We well craft ours to perfection in accordance with IPC industry regulations.
For this material, it is well suited for:
- VFH broadcasting
- Telecom Antennas
- Air-to-ground Airplane Communication System
- As well as many others for military or civilian use.
The IT180 material is described as a phenolic-cured laminate.
This means that our modern PCB machines heat the layers of copper clad laminate together so that the phenolic substance hardens.
As a result, the hardened laminate then resemble plastic composites, with sheets of copper foil on both sides of the sheet.
The raw material is prepreg sheets, and the finished product is PCBs. After finalizing, we then deliver your PCB as the end result.
OEM & ODM IT180 PCB Applications
Heavy industries benefit from PCB use because it adheres to safety standards like the lengthy EU and US directives.
The laminates made from this material are strong when bonded together, making them suitable for automobiles’ components.
Telecommunications and, more broadly, internet applications benefit from the impedance control provided by this type of PCB.
For servers to work, you need a PCB that can run all times of the day. This material is suitable for the purpose.
An Enterprise Data Warehouse can store information for entire offices. The facilities must not fail for safety reasons, so the PCB must not fail as well.
IT180 PCB Production Details As Following Up
- Production Facility
- PCB Capabilities
- Shipping Method
- Payment Methods
- Send Us Inquiry
NO | Item | Technical Specification | ||||||
Standard | Advanced | |||||||
1 | Layer Count | 1-20 layers | 22-40 layer | |||||
2 | Base Material | KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) | ||||||
3 | PCB Type | Rigid PCB/FPC/Flex-Rigid | Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. | |||||
4 | Lamination type | Blind&buried via type | Mechanical blind&burried vias with less than 3 times laminating | Mechanical blind&burried vias with less than 2 times laminating | ||||
HDI PCB | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | ||||||
5 | Finished Board Thickness | 0.2-3.2mm | 3.4-7mm | |||||
6 | Minimum Core Thickness | 0.15mm(6mil) | 0.1mm(4mil) | |||||
7 | Copper Thickness | Min. 1/2 OZ, Max. 4 OZ | Min. 1/3 OZ, Max. 10 OZ | |||||
8 | PTH Wall | 20um(0.8mil) | 25um(1mil) | |||||
9 | Maximum Board Size | 500*600mm(19”*23”) | 1100*500mm(43”*19”) | |||||
10 | Hole | Min laser drilling size | 4mil | 4mil | ||||
Max laser drilling size | 6mil | 6mil | ||||||
Max aspect ratio for Hole plate | 10:1(hole diameter>8mil) | 20:1 | ||||||
Max aspect ratio for laser via filling plating | 0.9:1(Depth included copper thickness) | 1:1(Depth included copper thickness) | ||||||
Max aspect ratio for mechanical depth- control drilling board(Blind hole drilling depth/blind hole size) |
0.8:1(drilling tool size≥10mil) | 1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil) | ||||||
Min. depth of Mechanical depth-control(back drill) | 8mil | 8mil | ||||||
Min gap between hole wall and conductor (None blind and buried via PCB) |
7mil(≤8L),9mil(10-14L),10mil(>14L) | 5.5mil(≤8L),6.5mil(10-14L),7mil(>14L) | ||||||
Min gap between hole wall conductor (Blind and buried via PCB) | 8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating) | 7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating) | ||||||
Min gab between hole wall conductor(Laser blind hole buried via PCB) | 7mil(1+N+1);8mil(1+1+N+1+1 or 2+N+2) | 7mil(1+N+1);8mil(1+1+N+1+1 or 2+N+2) | ||||||
Min space between laser holes and conductor | 6mil | 5mil | ||||||
Min space between hole walls in different net | 10mil | 10mil | ||||||
Min space between hole walls in the same net | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | ||||||
Min space bwteen NPTH hole walls | 8mil | 8mil | ||||||
Hole location tolerance | ±2mil | ±2mil | ||||||
NPTH tolerance | ±2mil | ±2mil | ||||||
Pressfit holes tolerance | ±2mil | ±2mil | ||||||
Countersink depth tolerance | ±6mil | ±6mil | ||||||
Countersink hole size tolerance | ±6mil | ±6mil | ||||||
11 | Pad(ring) | Min Pad size for laser drillings | 10mil(for 4mil laser via),11mil(for 5mil laser via) | 10mil(for 4mil laser via),11mil(for 5mil laser via) | ||||
Min Pad size for mechanical drillings | 16mil(8mil drillings) | 16mil(8mil drillings) | ||||||
Min BGA pad size | HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold) | HASL:10mil, LF HASL:12mil, other surface technics are 7mi | ||||||
Pad size tolerance(BGA) | ±1.5mil(pad size≤10mil);±15%(pad size>10mil) | ±1.2mil(pad size≤12mil);±10%(pad size≥12mil) | ||||||
12 | Width/Space | Internal Layer | 1/2OZ:3/3mil | 1/2OZ:3/3mil | ||||
1OZ: 3/4mil | 1OZ: 3/4mil | |||||||
2OZ: 4/5.5mil | 2OZ: 4/5mil | |||||||
3OZ: 5/8mil | 3OZ: 5/8mil | |||||||
4OZ: 6/11mil | 4OZ: 6/11mil | |||||||
5OZ: 7/14mil | 5OZ: 7/13.5mil | |||||||
6OZ: 8/16mil | 6OZ: 8/15mil | |||||||
7OZ: 9/19mil | 7OZ: 9/18mil | |||||||
8OZ: 10/22mil | 8OZ: 10/21mil | |||||||
9OZ: 11/25mil | 9OZ: 11/24mil | |||||||
10OZ: 12/28mil | 10OZ: 12/27mil | |||||||
External Layer | 1/3OZ:3.5/4mil | 1/3OZ:3/3mil | ||||||
1/2OZ:3.9/4.5mil | 1/2OZ:3.5/3.5mil | |||||||
1OZ: 4.8/5mil | 1OZ: 4.5/5mil | |||||||
1.43OZ(positive):4.5/7 | 1.43OZ(positive):4.5/6 | |||||||
1.43OZ(negative ):5/8 | 1.43OZ(negative ):5/7 | |||||||
2OZ: 6/8mil | 2OZ: 6/7mil | |||||||
3OZ: 6/12mil | 3OZ: 6/10mil | |||||||
4OZ: 7.5/15mil | 4OZ: 7.5/13mil | |||||||
5OZ: 9/18mil | 5OZ: 9/16mil | |||||||
6OZ: 10/21mil | 6OZ: 10/19mil | |||||||
7OZ: 11/25mil | 7OZ: 11/22mil | |||||||
8OZ: 12/29mil | 8OZ: 12/26mil | |||||||
9OZ: 13/33mil | 9OZ: 13/30mil | |||||||
10OZ: 14/38mil | 10OZ: 14/35mil | |||||||
13 | Dimension Tolerance | Hole Position | 0.08 ( 3 mils) | |||||
Conductor Width(W) | 20% Deviation of Master A/W |
1mil Deviation of Master A/W |
||||||
Outline Dimension | 0.15 mm ( 6 mils) | 0.10 mm ( 4 mils) | ||||||
Conductors & Outline ( C – O ) |
0.15 mm ( 6 mils) | 0.13 mm ( 5 mils) | ||||||
Warp and Twist | 0.75% | 0.50% | ||||||
14 | Solder Mask | Max drilling tool size for via filled with Soldermask (single side) | 35.4mil | 35.4mil | ||||
Soldermask color | Green, Black, Blue, Red, White, Yellow,Purple matte/glossy | |||||||
Silkscreen color | White, Black,Blue,Yellow | |||||||
Max hole size for via filled with Blue glue aluminium | 197mil | 197mil | ||||||
Finish hole size for via filled with resin | 4-25.4mil | 4-25.4mil | ||||||
Max aspect ratio for via filled with resin board | 8:1 | 12:1 | ||||||
Min width of soldermask bridge | Base copper≤0.5 oz、Immersion Tin: 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area) | |||||||
Base copper≤0.5 oz、Finish treatment not Immersion Tin : 5.5 mil(Black,extremity 5mil), 4mil(Other color,extremity 3.5mil) , 8mil( on copper area |
||||||||
Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area) | ||||||||
Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area) | ||||||||
Base copper 2 oz-4 oz: 6mil, 8mil( on copper area) | ||||||||
15 | Surface Treatment | Lead free | Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge | |||||
Leaded | Leaded HASL | |||||||
Aspect ratio | 10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) | |||||||
Max finished size | HASL Lead 22″*39″;HASL Lead free 22″*24″;Flash gold 24″*24″;Hard gold 24″*28″;ENIG 21″*27″;Flash gold(electroplated gold) 21″*48″;Immersion Tin 16″*21″;Immersion silver 16″*18″;OSP 24″*40″; | |||||||
Min finished size | HASL Lead 5″*6″;HASL Lead free 10″*10″;Flash gold 12″*16″;Hard gold 3″*3″;Flash gold(electroplated gold) 8″*10″;Immersion Tin 2″*4″;Immersion silver 2″*4″;OSP 2″*2″; | |||||||
PCB thickness | HASL Lead 0.6-4.0mm;HASL Lead free 0.6-4.0mm;Flash gold 1.0-3.2mm;Hard gold 0.1-5.0mm;ENIG 0.2-7.0mm;Flash gold(electroplated gold) 0.15-5.0mm;Immersion Tin 0.4-5.0mm;Immersion silver 0.4-5.0mm;OSP 0.2-6.0mm | |||||||
Max high to gold finger | 1.5inch | |||||||
Min space between gold fingers | 6mil | |||||||
Min block space to gold fingers | 7.5mil | |||||||
16 | V-Cutting | Panel Size | 500mm X 622 mm ( max. ) | 500mm X 800 mm ( max. ) | ||||
Board Thickness | 0.50 mm (20mil) min. | 0.30 mm (12mil) min. | ||||||
Remain Thickness | 1/3 board thickness | 0.40 +/-0.10mm( 16+/-4 mil ) | ||||||
Tolerance | ±0.13 mm(5mil) | ±0.1 mm(4mil) | ||||||
Groove Width | 0.50 mm (20mil) max. | 0.38 mm (15mil) max. | ||||||
Groove to Groove | 20 mm (787mil) min. | 10 mm (394mil) min. | ||||||
Groove to Trace | 0.45 mm(18mil) min. | 0.38 mm(15mil) min. | ||||||
17 | Slot | Slot size tol.L≥2W | PTH Slot: L:+/-0.13(5mil) W:+/-0.08(3mil) | PTH Slot: L:+/-0.10(4mil) W:+/-0.05(2mil) | ||||
NPTH slot(mm) L+/-0.10 (4mil) W:+/-0.05(2mil) | NPTH slot(mm) L:+/-0.08 (3mil) W:+/-0.05(2mil) | |||||||
18 | Min Spacing from hole edge to hole edge | 0.30-1.60 (Hole Diameter) | 0.15mm(6mil) | 0.10mm(4mil) | ||||
1.61-6.50 (Hole Diameter) | 0.15mm(6mil) | 0.13mm(5mil) | ||||||
19 | Min spacing between hole edge to circuitry pattern | PTH hole: 0.20mm(8mil) | PTH hole: 0.13mm(5mil) | |||||
NPTH hole: 0.18mm(7mil) | NPTH hole: 0.10mm(4mil) | |||||||
20 | Image transfer Registration tol | Circuit pattern vs.index hole | 0.10(4mil) | 0.08(3mil) | ||||
Circuit pattern vs.2nd drill hole | 0.15(6mil) | 0.10(4mil) | ||||||
21 | Registration tolerance of front/back image | 0.075mm(3mil) | 0.05mm(2mil) | |||||
22 | Multilayers | Layer-layer misregistration | 4layers: | 0.15mm(6mil)max. | 4layers: | 0.10mm(4mil) max. | ||
6layers: | 0.20mm(8mil)max. | 6layers: | 0.13mm(5mil) max. | |||||
8layers: | 0.25mm(10mil)max. | 8layers: | 0.15mm(6mil) max. | |||||
Min. Spacing from Hole Edge to Innerlayer Pattern | 0.225mm(9mil) | 0.15mm(6mil) | ||||||
Min.Spacing from Outline to Innerlayer Pattern | 0.38mm(15mil) | 0.225mm(9mil) | ||||||
Min. board thickness | 4layers:0.30mm(12mil) | 4layers:0.20mm(8mil) | ||||||
6layers:0.60mm(24mil) | 6layers:0.50mm(20mil) | |||||||
8layers:1.0mm(40mil) | 8layers:0.75mm(30mil) | |||||||
Board thickness tolerance | 4layers:+/-0.13mm(5mil) | 4layers:+/-0.10mm(4mil) | ||||||
6layers:+/-0.15mm(6mil) | 6layers:+/-0.13mm(5mil) | |||||||
8-12 layers:+/-0.20mm (8mil) | 8-12 layers:+/-0.15mm (6mil) | |||||||
23 | Insulation Resistance | 10KΩ~20MΩ(typical:5MΩ) | ||||||
24 | Conductivity | <50Ω(typical:25Ω) | ||||||
25 | Test voltage | 250V | ||||||
26 | Impedance control | ±5ohm(<50ohm), ±10%(≥50ohm) |
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
1. DHL
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
2. UPS
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
3. TNT
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
4. FedEx
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.