Guaranteed Top-Quality KB-6150
KB-6150 is made from the finest materials available and is rigorously tested before it leaves our company. We stand behind our products 100% and guarantee that you will receive a top-quality product every time.
PCBTok is committed to providing our customers with the highest quality KB-6150. That’s why we only use the best materials and most experienced PCB manufacturing technology to create our KB-6150 printed circuit boards.
Only the Best KB-6150 Manufactured at PCBTok
At PCBTok, we believe that our customers deserve only the highest quality in every aspect of their lives. That’s why we’ve been manufacturing KB-6150 for years and counting.
KB-6150 is a high-quality printed circuit board that has been proven to be reliable and effective. We stand by our products and are committed to providing you with the very best experience possible when using any product manufactured at PCBTok. We know that when you choose us as your supplier, you’ll be satisfied with our products and services—and we’re proud to say that most of our customers are repeat buyers!
PCBTok’s state-of-the-art facility is located in Shenzhen, China where we employ only the most talented professionals who have been trained in all facets of production, from design through assembly to final testing. If you’re looking for high quality KB-6150, call no other than PCBTok!
KB-6150 By Type
KB-6150 Technical Information
The KB-6150 printed circuit board is a high-quality, durable circuit board that has excellent dimensional stability and heat resistance, as well as excellent mechanical properties.
Flame-resistant KB-6150 printed circuit board is a type of flame-resistant board with the advantages of flame retardant, high thermal conductivity, low smoke generation and good insulation performance. It is mainly used in electronic equipment, instrumentation and other fields.
KB-6150 has excellent flame-retardant performance. At the same time, it has superior thermal conductivity and heat dissipation performance. This makes it ideal for use in areas where there is a high risk of fire or other forms of combustion, such as in electrical power stations and industrial facilities.
Dependable Dimensional Stability
The KB-6150 printed circuit board is an excellent choice for customers who are looking for dependable dimensional stability. While there are many factors that contribute to this characteristic, the most important is the epoxy resin used during fabrication.
In order to achieve dimensional stability, it is necessary for a KB-6150 PCB manufacturer to use an epoxy resin with high thermal and chemical resistance. This allows the board to maintain its properties even after being exposed to high temperatures or harsh chemicals. The KB-6150 uses epoxy resin that has been optimized for use in printed circuit boards.
Cost-Effective KB-6150 Manufactured by PCBTok
Manufacturing KB-6150 printed circuit board is going to be cost-effective if it’s manufactured by PCBTok. It is designed for use in a variety of applications, including high-voltage power supplies and optoelectronic circuits.
KB-6150 board from PCBTok features the following:
- High-quality manufacturing standards that meet or exceed those of competing products on the market
- Excellent electrical performance
- A wide range of temperature ranges to match your specific application needs
- Fast delivery times
KB-6150 PCB Fabrication
KB-6150 printed circuit board is a high-quality PCB that has excellent heat and moisture resistance. This is an important characteristic for the circuit boards used in various applications, including those that are exposed to extreme temperatures or subjected to moisture conditions.
The unique molecular structure of the insulating material used in KB-6150 printed circuit board makes it resistant to heat and moisture. This means that the circuit boards can be used in harsh environments without suffering any damage.
The supreme thickness uniformity of the KB-6150 is an indication of how well the copper layers are evenly they’re applied. The more uniform the layer thickness, the better your product will be able to withstand wear and tear and still function properly.
KB-6150 from PCBTok is the best option for your next PCB project. It’s made using a proprietary method that allows for uniform thickness throughout the board, which means you won’t have to worry about warping or other issues caused by uneven layers.
KB-6150 PCB Production Details As Following Up
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“If you’re looking to have PCBs made in China, you need to try PCBTok. They are one of the best PCB manufacturers I’ve ever come across online. When it comes to their quality and service, they have never failed me. I’ve been working with PCBs for a long time, and I’ve always loved the craftsmanship that goes into their manufacturing. The PCBs from PCBTok are always of the best quality and it’s just a pleasure to work with them.”Harold Shipman, Reliability Engineer from West Yorkshire, England
“For a good while now, I have been purchasing my circuit boards from PCBTok. I am quite particular when it comes to selecting the best PCBs for my projects, but with their help, I can be confident that I will always receive the best circuit boards ever. They are not only incredibly helpful when I have questions regarding the items, but they also provide me solutions that would be appropriate for the project I am working on right now.”Lorenzo Gilyard, Supply Chain Director from Missouri, U.S.A
“PCBTok has been a good experience for me. Our questions and problems will always be quickly addressed by their customer service. They provide high-quality PCBs, which I have bought from them. I can now get whatever I need without having to go somewhere else thanks to their extensive product selection. Any person or business who wants to receive a professional PCB fabrication service should try this PCB fabrication company.”Nikolai Dzhumagaliev, Computer Hardware Engineer from Georgia, USA
The KB-6150 and KB-6160 are variations of one another, but there are some key differences.
KB-6150 has excellent dimensional stability and heat resistance, as well as mechanical properties. However, this resin has a tendency to smear in high-speed drilling.
KB-6160 is also a variation of the KB-6150. It shares all of the same characteristics as its predecessor, but it has less resin smear in high-speed drilling and UV blocking, which makes it slightly more suitable for use with AOI machines than its predecessor.
IPC-4101D/21 is an IPC standard used to define the design, construction, and testing of electric motor controllers. The standard is maintained by the IPC.
The purpose of this standard is to provide requirements for the design, construction and testing of electric device that are suitable for use in electronic applications.
IPC-4101D/21 is intended to provide a uniform basis for specifying the base materials required in rigid and multilayer printed boards, especially KB-6150. The requirements are presented in tables of values or in general terms that can be applied to any type of material.
The UL Certification E123995 is a standard for Metal clad industrial laminates for use in single layer printed wiring boards with copper on one or both sides furnished as sheets. This certification is the mark of a company that has met the highest standards of quality and safety.
This certification ensures that the products meet all industry requirements, including quality control and safety standards. The products are tested to ensure that they can withstand extreme temperatures, moisture, and pressure.
KB-6150 printed circuit boards meet this certification, and this means that they are safe to use in your electronics projects.