What is a Mouse PCB?
The circuit board that powers your mouse is called a mouse PCB.
You navigate a computer by using a mouse, which is a computer peripheral.
For those who do not want to use a touchscreen or touchpad, it is a physical aid.
Consumers continue to need the tactile control offered by mouse devices.
When the mouse’s PCB malfunctions, the device is defective.
PCBTok’s Mouse PCB Dependability and Quality
If PCBTok’s goods and services weren’t up to par, the company wouldn’t have endured 12 years in the market.
As a result, our entire line of Mouse PCB products is dependable and secure.
Our staff at PCBTok is well-trained and knowledgeable in this field of Mouse PCB production.
We have extensive manufacturing experience, so we are firmly familiar with the assembly process.
Because we can manufacture Mouse PCBs as an OEM manufacturer,
We can provide competitive prices for your satisfaction.
Mouse PCB By Feature
PCB Designs for Mouse Devices
You must first have a PCB design. Software like KiCad, Altium, and Eagle are options.
Alternately, you could just purchase one online. After that, you need a PCB schematic.
Keep in mind that you must include a circuit for the sensor, a circuit for the button, and a circuit for the laser in the schematic.
Take this into account as well if you’re making LED optical PCB.
Using an orderly PCB schematic, a mouse with movement tracking should be produced.
Different Types of Mouse PCBs
The different type of Mouse PCBs can be classified many ways.
Identifying the type of mouse you are using is one way we can do it.
For example, you can have Optical Mouse PCB, Laser Mouse PCB, and Gaming Mouse PCB.
The board can also be categorized by layer.
For example, you can have a Multilayer type, a double-layer, or the less common Single-layer.
Nevertheless, some categorize it based on the circuit board’s soldermask color.
For example, the typical Green PCB purposed for a mouse is called Green Mouse PCB.
PCB Inspections for a Mouse PCB
Testing your board for PCB compatibility is an essential part of PCB manufacturing.
The board for the mouse is also mass produced because it is a commonly used item.
For this reason, we emphasized the value of AOI earlier in this article.
- Micro-section analysis
- In-circuit testing
- Hole resistance testing
- Functional tests
These are just few of the additional tests that are carried out. Machines carry out the inspection most of the time for accuracy sake.
Meet Your Best Mouse PCB Manufacturer
Before arriving at your doorstep, PCBTok’s PCBs have undergone meticulous inspection and quality testing.
We don’t take shortcuts with that. Bad customer reviews are to be avoided.
Your satisfaction is what drives us at PCBTok to create premium products specifically for mouse devices.
Additionally, we strive to provide exceptional customer service.
We always check to make sure all of your orders are accurate and in good condition.
Call us right away—our lines are open around-the-clock!
Mouse PCB Fabrication
To carry out the job of constructing this board, you can use a PCB manufacturer so that all the following components are complete in the PCB Assembly process:
- The bare board, with soldering done well
- Lens (especially for Optical Mouse and Bluetooth Mouse)
- Pins, capacitors, and the cable receptacle
- Switches and Sensors
- Surface Mounted Components, like the Microcontroller
If you are a hobbyist, you can DIY too.
This product’s circuit board must adhere to strict parameters, as all electronic gadgets should.
The Mouse’s PCB voltage, current, resistance, capacitance, and frequency are referred to as its parameters. You can surmise them yourself based on specifics as follows:
- Up to 10-14 capacitors with 1.0 by 0.5 millimeter specs
- 8 to 1.55mm copper thickness depending on what you like, thick or thin
- Flame retardant FR4 PCB material (UL 94 V-o)
- Usage of CNC to cut the panelized PCBs (depanelization)
Mouse PCB Production Details As Following Up
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“They were successful in returning us to our intended production, and in my opinion, they went above and beyond what most other PCB manufacturers would. When I called other companies to try to get them interested in our challenging PCB design for radars, most of them just wanted to charge me a hefty fee. Our supply chain issue can only be resolved by PCBTok. All for a very affordable cost. I’d use them once more.”Tomas Camilleri, Logistics Supervisor from Cospicua, Malta
“Thank you, PCBTok, for easing the stress of my PCB shopping. At a reasonable cost, they could accommodate. They arrived exactly on time, and they worked quickly and effectively. For all PCB enthusiasts out there, I highly recommend them. Even if you only place a small order, it will still arrive on time and be packaged nicely. I have no complaints.”Douglas Ricci, Purchaser/ Buyer from Vimodrone, Italy
“Fast, trustworthy, and affordable PCBA service. My FR4 PCBs were supplied by PCBTok, who did a fantastic job. He responded quickly and made sure that my projects’ additional PCBA installations went off without a hitch. These guys provided excellent service and value. They responded promptly and took care of a number of my problems without requesting excessive amounts of my time. That’s great because I’m always busy. I appreciate this personal touch a lot.”Frank de Souza, Supply Chain Manager from Brampton, Canada