100% Satisfactory PCB Gold Finger
Did you know you could count on us to make any type of PCB Gold Finger?
We will not limit what you truly desire, unlike other subpar PCB manufacturers.
- Perform E-test and the standard AOI test, as well as others
- PCB inspection procedure is extremely stringent
- Bulk orders qualify for a free sample
We can also perform it at a very low cost!
Wholly Accountable PCB Gold Finger Supplier
PCBTok has been producing PCBs for over a decade. As a result, we have completely satisfied the demands of many consumers.
You will be another satisfied customer if you use us as your PCB Gold Finger provider.
To ensure your satisfaction, we rigorously test every item before shipping them.
We lower the risk of bad and defective PCBs by requiring your PCB Gold Finger goods to undergo inspections.
For sure, you want that kind of assurance.
Inquire about our PCB Gold Finger goods and PCB assembly services right now!
PCB Gold Finger By Feature
PCB Gold Finger By Soldermask Color & Number of Layers (6)
PCB Gold Finger By Type of Material (6)
Noteworthy PCB Gold Finger Testing
All of the resulting items are subjected to a battery of rigorous PCB tests.
We subject the products to the following tests:
- 100% Visual Inspection
- Flying Probe Test
- Micro-Sectioning Analysis
- Fixture Tests
Make sure your devices survive longer, we pack them well to ensure maximum sturdiness.
Refined PCB Equipment & Process
Our Gold Finger PCBs are designed to meet the needs of our customers.
Most of our customers actually request both PCB manufacture and PCBA.
Actually, buyers frequently enquire about PCBA after we successfully deliver their PCB Gold Finger order.
If you need some configurations, please let us know and we will gladly assist you!
Seeking Out the Best PCB Techniques
The PCB Gold Finger configuration on your board is intended to allow for additional design tweaks as needed.
You will be able to see your finished product thanks to our CAD and CAM reports.
You have the option of continuing the design or having us replicate it using PCB reverse engineering services.
We can do all these since we are a indisputably PCB Gold Finger champions—
PCBTok is dependable and trustworthy.
Accommodating PCB Gold Finger Orders by PCBTok
Before mass producing your PCB Gold Finger, we analyze a variety of factors.
The top-most reason is customer satisfaction.
To eliminate any doubt, we offer sample orders so that you can choose whether or not you are satisfied.
You can provide feedback on any outcome on your PCB Gold Finger demand.
We have no objections if you want to make additional changes to it. We are highly cooperative.
PCB Gold Finger Fabrication
We conform to the internationally renown standards of PCB manufacturing on PCBTok:
- Our PCB raw material contains no substances on the REACH forbidden list
- Because we are RoHS certified—you’ve now got peace of mind
- Rigorously follow UL for Canada and US too
As a result, you can rest assured that your electrical and electronic equipment manufactured with PCBTok component will safe and sound.
Please inquire if you have any more questions about this issue.
PCBTok will bring you peace and stability in your commercial operations.
It is convenient to have a single manufacturer handle both PCB Gold Finger and PCB Assembly requirements.
In the event that a repair is required, you just need to contact one vendor, us.
Just inquire about them with our sales team. Every PCB assembly we mentioned here will work perfectly with these.
OEM & ODM PCB Gold Finger Applications
PCB Gold Finger Production Details As Following Up
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“The PCBTok sales crew was exceptionally prompt, friendly, and comprehensive. I’m glad they were able to complete my transaction without incident. When they didn’t rush their work and listened to me, I knew this was a wonderful company. I even made a final walkthrough and pointed out a few extra components for my large PCB build. The prices were also quite affordable.”Stephen Hardesty, Computer Hardware Professional, from Yorkshire, UK
“There could not be a better way to purchase a PCB online. I got the greatest price on a PCBA with PCB. They had a lot of options for materials, PCB layers, and FPC, and I felt confident that I was receiving the optimum deal. The salesperson was very open about the concerns with the goods I was interested in and did not hide anything, which made the decision-making process easier.”Nicolson Royce, PCB Inspector, from Seaton Burn, England
“I quite wish I discovered them earlier Excellent value and service! The service and staff are excellent! The work accomplished was outstanding. Choose PCBTok if you want your PCB to be completed exactly as it was designed. Their work is flawless. Thank you for being such a terrific, trustworthy company. I’ll keep referring others to this company, as it saves a lot of money.”Ian Bartlett, IEC Engineer from Texas, Austin
PCB Gold Finger: The Ultimate FAQ Guide
There are several important factors to consider when choosing a PCB gold finger. If you have ever tried to solder your own PCBs, then you know how time-consuming it can be. This can be avoided by learning the proper techniques and reading our PCB Gold Finger FAQ guide. Listed below are some of the most important factors to consider when choosing PCB gold fingers. They are inexpensive and reusable, which means they can be replaced if they become contaminated. In addition, PCB gold fingers have good conductivity and heat resistance, so they can withstand high temperatures. Finally, they are highly adaptable and can be adapted to various shapes. In addition, they have a long shelf life, are durable, and work efficiently.
PCB gold fingers are gold fingers with contours. These fingers must be separated from the motherboard contour by at least 0.5 mm. Failure to follow these guidelines can lead to failure. On the PCB, there are also solder resists and screen printing. In addition, it is not recommended to solder these near the gold fingers. Finally, this type of gold finger should be placed separately from the motherboard.
PCB gold fingers can withstand wear and corrosion. They are plated with nickel and cobalt alloys. In terms of corrosion resistance and electrical conductivity, gold fingers rank third. However, they are tailored to the needs of each board. In addition, PCB gold fingers should be placed so that they do not interfere with the solder resist layer. Check that your fingers are aligned with the center of the board.