What is a Press-fit PCB?
A Press-fit PCB is a specialized form of PCB used in several applications.
Primarily, this PCB is one dedicated to high current applications.
It passes certain requirements due to its thermal performance.
But the use of this type of PCB is not for every type of project.
Aside from considerations regarding cost, there are other concerns.
Information about this type of PCB can be found on this page.
An Upgraded PCB to Match Your Needs
You can be confident that every PCB we produce is of the highest caliber.
Our participation in the PCB West Trade Show as well as other electronics trade shows
Keeps us up to date on the newest advancements in electronics, including the Press-fit PCB.
We try our best to maintain our clients’ comfort.
Get in touch with PCBTok right away for your order!
If you’re willing to spend a bit more money than you would for standard boards–
You might benefit from using this type of PCB.
Press-fit PCB By Feature
What Makes Press-fit PCB So Special?
There are many ways to classify PCBs, some classify it by layers.
If you think of a Press-fit PCB in terms of solder, you can describe it as unique.
You see, most PCBs use soldering to construct circuit boards.
But Press-fit technology, when applied, does not use solder.
It’s solder-free. This results in reducing the risks associated with soldering.
As a result, a Press-fit PCB is lead-free.
It is also, unlike soldered boards, suitable for multiple reflow and assembly processes.
What are the Advantages of Using the Press-fit Technology?
As previously stated, this type of PCB is solder-free.
Other advantages include:
- It’s good for applications that demand the board to be exposed in high heat
- It’s good for high current applications because of high ampacity (current-carrying ability)
- It is stable because of its low Failure-in-Time value
- Eco-friendly option because the boards can be re-used if pins are removed
- The process of manufacturing it is straightforward, and can be fast-paced
What Materials are Used in the Press-fit PCB Process?
The basic materials that make-up a PCB is used in a Press-fit one.
That means, this type of PCB is not so different as it has the PCB Core, Substrates, Soldermask, etc.
But when compared to other PCBs, the Press-fit type is not subject to Through Hole Assembly.
Neither does it use Surface Mount Technology to mount PCB components.
Rather, it uses two types of pins:
Solid pin – which has a SOLID press-in zone
Compliant pin – which has an ELASTIC press-in zone
What Makes a Good Press-fit PCB Manufacturer?
Are you trying to locate a reputable manufacturer of this kind of PCB?
You must be looking for a manufacturer who can provide both high-quality products and first-rate customer service.
PCBTok is the solution.
With this Press-fit type, we cover many applications.
We can offer you all types of products for all types of PCB.
Let’s set out on a successful journey together.
For your satisfaction, we can produce OEM PCBs using the Press-fit method.
Press-fit PCB Fabrication
The major application of this type of PCB is in the automotive industry.
That being said, there are other industries that make use of Press-fit boards. These are enumerated below:
- Energy Sector – since this industry uses a lot of Power PCB/ Power Supply PCB
- Medical Sector – which needs miniaturized parts
- Aeronautics Sector – for the most sophisticated boards
- Any HDI PCB or High Power PCB design
- Navigation & Sensors, plus many others
Not all circuit boards can use the Press-fit technology.
Consider the following factors:
- Are you using FR4 material? FR4 is acceptable, so is TG PCB and High TG PCB
- What thickness of copper will be used? Standard of 1.6mm is acceptable
- If Surface Finish is deliberated, we do recommend ENIG or Lead-free HASL
- Press-fit parameters – the tolerance and minimum distance are ±0.05 for drilled PCB and ±0.075 for milled PCB
- If SMD is used, there is a minimum distance of 2mm
Press-fit PCB Production Details As Following Up
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“I have already shared my positive experience with PCBTok with others and would recommend them to them. There were no additional fees, and the cost was very affordable. They were very reasonable in this regard because they always provided me with a weekly report on time. They are very intelligent and diligent. They were ready to take on my PCB project. I would definitely use the crew again because they were excellent!”Del Porter, Associate Product Marketing Manager from Canterbury, New Zealand
“They were excellent, guys. They promptly provided me with the PCB design I requested. They were well-organized, made deliberate movements, and avoided taking short cuts. On the third order I placed with them this year, I was once more pleased! Very pleasant and timely individuals who work quickly but thoroughly. They’re also so reasonably priced! When I need circuit boards in the future, I will always keep them in mind.”Aldean Huebner, Senior IT Strategy Advisor from Antwerp, Belgium
“I have now collaborated with the PCBTok team on three circuit boards, and I have also recommended them to a number of friends. They always deliver their products on time and are incredibly helpful. They work quickly and consistently give me the impression that they are trying to outdo my expectations. There hasn’t been a fee increase either, which is such a welcome surprise.”Toni Hetherington, PCB Inspector from Basel, Switzerland