PCBTok’s Masterfully Developed Rogers 3210
PCBTok is a dedicated manufacturer who only seeks to provide the best Rogers 3210 products to their consumers that will function flawlessly without any problems.
- Before production, CAM does an in-depth analysis of every file.
- We accept several different modes of payment.
- We offer a sample item before allowing a large number of purchases.
- Provide comprehensive support with bespoke PCBs.
- We perform 100% inspection of both AOI and E-Test.
Top-Tier PCBTok Rogers 3210 Products
In PCBTok, we constantly prioritize the quality and performance of our Rogers 3210 PCB products to ensure they won’t experience any issues during use.
We value and anticipate the needs and requirements of our consumers; hence, we are doing our utmost best to provide them with only the finest products we have.
All our PCB products, including the Rogers 3210, are primarily composed of high-class materials and manufactured using sophisticated methods.
We’re more than just a PCB manufacturer; we won’t let you experience any hassles.
PCBTok is more than capable of fulfilling all of your Rogers 3210 PCB demands quickly and efficiently with its top-notch quality and performance.
Rogers 3210 By Feature
Rogers 3210 By Thickness (5)
Rogers 3210 By Type of Board (5)
Technical Features of Rogers 3210
The following are the essential technical features of a Rogers 3210:
- Composition – It is primarily composed of highly conductive film material.
- Materials – It deploys resources that are resistant to chemicals and high-density type of components.
- Properties – It has exceptional and constant thermal and electrical features.
- Rigidity – Due to its woven glass reinforcement, it has good substrate rigidity. In addition, it adds up to its outstanding dimensional stability.
- Surface – Compared to others, it has a smooth surface due to its laminate and copper surface. Thus, it makes it the best among others.
Perks of Rogers 3210
We have the following advantages you can enjoy in a Rogers 3210:
- Electrical Signal – It has a property that prevents electric signal loss; hence, they are ideal for communication systems.
- Impedance Control – It has exceptional and uniform value.
- Dielectric Constant – Since it has a low value, it is ideal for sensitive uses.
- Cost – It has pretty affordable manufacturing costs despite its numerous benefits.
- Thermal Conductivity – It has a high value because of its PTFE materials.
- Miniaturization – You can quickly reduce its size; thus, better for coupling.
Limitations of Rogers 3210
Even though it has several benefits, a Rogers 3210 also has limitations. Here’s some of it:
- Surface Texture – Often, it may come out as an uneven surface. However, with the proper manufacturer, we can prevent it from happening.
- Fine-Pitch Components – It might not be friendly for this sort of component.
- Environmental Concerns – Some of it contains lead; however, choosing us as your manufacturer will remove this occurrence.
- Appearance – It has soldered bridging; hence, if you’re uncomfortable with this type of soldering, this might not be a good option.
PCBTok is Professional in Producing Superb Rogers 3210
There are a lot of Rogers 3210 manufacturers worldwide; however, no one can replace the products we provide for our consumers. We are among the top PCB manufacturers in China, capable of producing high-class Rogers 3210.
In addition, PCBTok is a company that prioritizes its customer’s requirements and specifications. Thus, we constantly value quality over the number of products.
We adhere to all of the required certifications and accreditations established by the standard guidelines; hence you can guarantee that your product will be of its highest quality. Additionally, we only use quality materials in our PCB products.
Our products have undergone extensive tests and inspections to ensure they are at par. Furthermore, we are available 24/7 to answer all of your PCB concerns.
Kindly contact us to avail our best offer deals!
Rogers 3210 Fabrication
Since we value transparency in PCBTok, we would like to share with you the quality materials we used in constructing your Rogers 3210 PCB.
The primary materials include electrodeposited foil, resistive foil, conductive adhesive film, thermoset, ceramic, and woven glass.
Additionally, we incorporate hydrocarbon, ceramic PTFE bond ply, woven glass laminates, and epoxy laminates to ensure that they can tolerate heavy types of operation.
All of these materials are crucial in determining the final quality of the product; hence, we suggest looking out for these materials.
If you have any questions concerning the said materials, just message us.
We utilize the most advanced assembly process to make sure all of your Rogers 3210 can perform up to their optimum performance.
In PCBTok, assembly is simple; it only goes through four (4) phases. Firstly, we have the application of the solder paste to the board.
Secondly, we deploy pick and place machines to mount various components. Then, we perform reflow soldering to ensure permanent component placement.
Finally, we subject it to a strict inspection for quality control. We perform this to ensure they perform well during their operations.
Kindly write us if you wish to have detailed information on this process.
OEM & ODM Rogers 3210 Applications
Rogers 3210 Production Details As Following Up
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“I have dealt with numerous PCB manufacturers before, but I haven’t experienced the same one as PCBTok’s service. They are very professional whenever they communicate with me and very straightforward in addressing my concerns quickly. Also, all of my 200 pieces of Rogers 3210 PCBs were in good condition when they arrived; no defects at all. They provided me with sample items before they mass-manufactured my other orders to ensure I hadn’t missed anything with its design and circuit traces. PCBTok is worth a try; I highly recommend them.”Zachary Becker, Computer Hardware Technician from Trenton, New Jersey
“If you’re still looking for signs to purchase from PCBTok, this is it. I can attest to the quality and performance of their PCB products. Also, they have the most experienced and trained staffs who will assist you professionally and respectfully. They provided me comfort while dealing with them; I never experienced any hassle because they were very organized. Moreover, they gave me adequate assurance regarding my order; it made me feel at ease while I patiently waited for my orders to arrive. After receiving all of it, I was amazed by its securely packaged box and its quality and performance during usage. Thanks a lot, PCBTok, for your exceptional service and products.”Raymond Shephard, Electronics Technologist from Bunbury, Australia
“I am very thankful to PCBTok for providing me with quality items that made my project very successful; without their top-tier products, I wouldn’t ever think I’d win the heart of my CEO. Not just because of their products, but their highly skilled staff who processed my orders fast while ensuring they were working perfectly without any problems. I haven’t experienced negative encounters with them because they are very competent in their jobs. I will definitely come back to them again for my future company projects. Thank you so much, PCBTok!”Jeremy Cooper, Project Engineer from Jefferson City, Missouri