Change Language
Superb Rogers 4350b Products Available
Because of its lowered cost, the Rogers 4350b is preferred by many commercial and industrial sectors.
- There is no requirement to place a minimum order (No MOQ)
- Send us a Gerber file, and we’ll do the rest
- Engineering help is available 24 hours a day
- We stock the majority of Rogers’ product lines
We will follow your timeline to ensure your satisfaction.
Be at Par with the Best Rogers 4350b
PCBTok is your #1 Rogers 4350b supplier.
Based in Shenzhen, we are a PCB manufacturing industry authority.
We create circuit boards using Rogers materials as well as other high-class prepregs and laminates.
PCBTok is the place to go if you need a reputable source for any Rogers 4350b PCB.
Inquire now!
This page contains information on the PCB items manufactured by our firm utilizing Rogers 4350b material.
Your product also has a good FAQ section.
Rogers 4350b By Feature
High Frequency Rogers 4350b PCB is offered in panelized version. As the V-cutting PCB is an excellent budgeting method.
RF Rogers 4350b PCB is used in mobile devices of various sizes. Most are also High Frequency and/or High Density, well suited to the performance of semiconductors.
When applied to computers that manage cell towers, Multilayer Rogers 4350b PCB are more cost-effective. Because of its longevity and hardiness, it lasts well outdoors.
You can confirm that the Rigid Rogers 4350b PCB that controls the devices is stable. Aside from dimensional stability, it is also flame retardant.
If you’re looking for an equally high-performance board just like the RO4003CTM, this is it. The High Tg Rogers 4350b PCB has a tolerance if >280°C too.
The Rogers 4350b PCB is designed for military and high-speed internet use. Its capacity to be standardized also makes it suitable for RF receivers and transmitters.
Rogers 4350b By Special Function (5)
-
Impedance Control PCB is highly recommended since it eliminates the signal interference issue. Opt for high layer count.
-
Low Loss Rogers 4350b PCB makes the dissipation factor minimum, indicating that the electrical signals in the device are safe. There is also an option for PIM-dedicated applications.
-
CAF Resistant Rogers 4350b PCB keeps filament growth at bay. We don’t want you to return the board because of this flaw.
-
UL 94 V-0 Rogers 4350b PCB is sought after especially if the end-device you will use with the Rogers material is exposed to high heat. The DK value is 3.48 +/- 0.05.
-
The Plated Through Hole Rogers 4350b PCB’s popularity stems from its suitability for the lower-end PTH method.
Rogers 4350b By Usage & Dimension (6)
-
The Radio Frequency PCB is used in RF Tags or RFID. Scrubbing equipment designed for copper surface application is applied as part of manufacture.
-
We present the Communication Equipment PCB, which focuses on Broadband equipment. Most internet equipment have Rogers.
-
You will require LNB Downconverter PCB if you have a satellite. We have Single, Hybrid, Wideband, Feedhorn, and Quad LNB options.
-
Rogers 4350b PCB Thickness refers to measurements in mm for material thickness. For those with special LoPro foil, there is an added thickness to the total oz.
-
Rogers 4350b PCB Panel Size refers to the dimensions of the panels that can be used to manufacture circuit boards. Size restrictions apply, so please inquire.
-
Rogers 4350b PCB Copper Cladding refers to standard copper cladding in PCB measures in oz.
High Quality Rogers 4350b Items By China's Best
PCBTok focuses on long-term PCB fabrication and assembly.
We also offer turn-key solutions for your organization because we create a wide range of PCB items, not just circuit boards.
For instance, we perform prototyping for PCBs, Box Assembly, and low-volume fabrication.
Rogers 4350b stands out with patented woven glass strengthened by hydrocarbon and/or ceramic elements.
With our equally sophisticated production line, we can build your proprietary-material Rogers.
Expertise in Rogers 4350b PCB Fabrication
We want every customer to benefit from our PCB fabrication experience.
We are as good as other competitors with higher prices.
Premium material is used to ensure your fulfillment.
We only use fresh, genuine Rogers materials, with no substitutes whatsoever.
Check our certifications for your peace of mind!
Just like our competitors, we are globally rated good.
So, don’t hesitate. Shift to PCBTok now.
Support & Care for Your Rogers 4350b
Our skilled workforce always performs professionally.
Technical and sales professionals are available at your convenience thanks to their skilled training.
We’ll keep your quote updated on a regular basis.
Allow 1-2 hours for responses to engineering questions.
With our large-scale facility, we are also perfectly qualified to be your electronics manufacturing or EMS partner.
Choose PCBTok now!
Communicate Openly with You
It is our objective to exclusively deliver high-quality PCBs because we want our customers to get the most out of their PCBs.
We have highly qualified and experienced experts on hand to help you with any questions you have about our PCBs—
Whether they be Rogers 4350b or any other Ceramic, PTFE, or high Tg PCB.
Please email us any feedback, and we will gladly improve on any aspect regarding your order.
Rogers 4350b PCB Fabrication
We put our PCBs through rigorous testing on a regular basis.
We are eager to provide you with a PCB that is worthwhile your time—
But without the high price other nations produce.
We also have highly qualified personnel on hand to answer any questions you may have about our Rogers 4350b PCB.
So, don’t get stuck with the unwise options, choose PCBTok now.
PCBTok will not send you a low-quality PCB Plating because it will degrade the overall performance of your company.
As a result, we put our Rogers 4350b PCB through the following tests:
- The standard: AOI test
- X-Ray Inspection
- Thermal Shock Test
- For PTH, Hole Resistance Test
- Lastly, Functional Validation Tests
OEM & ODM Rogers 4350b Applications
Broadcasting Satellite PCB can be used in LNB Downconverters. The signals sent will then be crystal clear and of the appropriate voltage.
Rogers 4350b PCB for Sensors are designed specifically for autonomous applications. However, GPS can also be utilized on ships.
Rogers 4350b PCB for Automotive Applications is ideal because high-quality automobile technological solutions can be used in vehicle engine control.
Rogers 4350b Broadband & Internet PCB is compatible with Fiber Optics, Mobile PCB, and cellular networks.
Rogers 4350b PCB for Telecom Equipment products follow your country’s regulations, anywhere you are, because it is ideal to be on the proper track of the law.
Rogers 4350bProduction Details As Following Up
- Production Facility
- PCB Capabilities
- Shipping Method
- Payment Methods
- Send Us Inquiry
| NO | Item | Technical Specification | ||||||
| Standard | Advanced | |||||||
| 1 | Layer Count | 1-20 layers | 22-40 layer | |||||
| 2 | Base Material | KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) | ||||||
| 3 | PCB Type | Rigid PCB/FPC/Flex-Rigid | Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. | |||||
| 4 | Lamination type | Blind&buried via type | Mechanical blind&burried vias with less than 3 times laminating | Mechanical blind&burried vias with less than 2 times laminating | ||||
| HDI PCB | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | ||||||
| 5 | Finished Board Thickness | 0.2-3.2mm | 3.4-7mm | |||||
| 6 | Minimum Core Thickness | 0.15mm(6mil) | 0.1mm(4mil) | |||||
| 7 | Copper Thickness | Min. 1/2 OZ, Max. 4 OZ | Min. 1/3 OZ, Max. 10 OZ | |||||
| 8 | PTH Wall | 20um(0.8mil) | 25um(1mil) | |||||
| 9 | Maximum Board Size | 500*600mm(19”*23”) | 1100*500mm(43”*19”) | |||||
| 10 | Hole | Min laser drilling size | 4mil | 4mil | ||||
| Max laser drilling size | 6mil | 6mil | ||||||
| Max aspect ratio for Hole plate | 10:1（hole diameter＞8mil） | 20:1 | ||||||
| Max aspect ratio for laser via filling plating | 0.9:1(Depth included copper thickness) | 1:1(Depth included copper thickness) | ||||||
| Max aspect ratio for mechanical depth- control drilling board(Blind hole drilling depth/blind hole size) |
0.8:1(drilling tool size≥10mil) | 1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil) | ||||||
| Min. depth of Mechanical depth-control(back drill) | 8mil | 8mil | ||||||
| Min gap between hole wall and conductor (None blind and buried via PCB) |
7mil(≤8L),9mil(10-14L),10mil(＞14L) | 5.5mil(≤8L),6.5mil(10-14L),7mil(＞14L) | ||||||
| Min gap between hole wall conductor (Blind and buried via PCB) | 8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating) | 7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating) | ||||||
| Min gab between hole wall conductor(Laser blind hole buried via PCB) | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | ||||||
| Min space between laser holes and conductor | 6mil | 5mil | ||||||
| Min space between hole walls in different net | 10mil | 10mil | ||||||
| Min space between hole walls in the same net | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | ||||||
| Min space bwteen NPTH hole walls | 8mil | 8mil | ||||||
| Hole location tolerance | ±2mil | ±2mil | ||||||
| NPTH tolerance | ±2mil | ±2mil | ||||||
| Pressfit holes tolerance | ±2mil | ±2mil | ||||||
| Countersink depth tolerance | ±6mil | ±6mil | ||||||
| Countersink hole size tolerance | ±6mil | ±6mil | ||||||
| 11 | Pad(ring) | Min Pad size for laser drillings | 10mil(for 4mil laser via),11mil(for 5mil laser via) | 10mil(for 4mil laser via),11mil(for 5mil laser via) | ||||
| Min Pad size for mechanical drillings | 16mil(8mil drillings) | 16mil(8mil drillings) | ||||||
| Min BGA pad size | HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold) | HASL:10mil, LF HASL:12mil, other surface technics are 7mi | ||||||
| Pad size tolerance(BGA) | ±1.5mil(pad size≤10mil);±15%(pad size>10mil) | ±1.2mil(pad size≤12mil);±10%(pad size≥12mil) | ||||||
| 12 | Width/Space | Internal Layer | 1/2OZ：3/3mil | 1/2OZ：3/3mil | ||||
| 1OZ: 3/4mil | 1OZ: 3/4mil | |||||||
| 2OZ: 4/5.5mil | 2OZ: 4/5mil | |||||||
| 3OZ: 5/8mil | 3OZ: 5/8mil | |||||||
| 4OZ: 6/11mil | 4OZ: 6/11mil | |||||||
| 5OZ: 7/14mil | 5OZ: 7/13.5mil | |||||||
| 6OZ: 8/16mil | 6OZ: 8/15mil | |||||||
| 7OZ: 9/19mil | 7OZ: 9/18mil | |||||||
| 8OZ: 10/22mil | 8OZ: 10/21mil | |||||||
| 9OZ: 11/25mil | 9OZ: 11/24mil | |||||||
| 10OZ: 12/28mil | 10OZ: 12/27mil | |||||||
| External Layer | 1/3OZ：3.5/4mil | 1/3OZ：3/3mil | ||||||
| 1/2OZ：3.9/4.5mil | 1/2OZ：3.5/3.5mil | |||||||
| 1OZ: 4.8/5mil | 1OZ: 4.5/5mil | |||||||
| 1.43OZ（positive）:4.5/7 | 1.43OZ（positive）:4.5/6 | |||||||
| 1.43OZ（negative ）:5/8 | 1.43OZ（negative ）:5/7 | |||||||
| 2OZ: 6/8mil | 2OZ: 6/7mil | |||||||
| 3OZ: 6/12mil | 3OZ: 6/10mil | |||||||
| 4OZ: 7.5/15mil | 4OZ: 7.5/13mil | |||||||
| 5OZ: 9/18mil | 5OZ: 9/16mil | |||||||
| 6OZ: 10/21mil | 6OZ: 10/19mil | |||||||
| 7OZ: 11/25mil | 7OZ: 11/22mil | |||||||
| 8OZ: 12/29mil | 8OZ: 12/26mil | |||||||
| 9OZ: 13/33mil | 9OZ: 13/30mil | |||||||
| 10OZ: 14/38mil | 10OZ: 14/35mil | |||||||
| 13 | Dimension Tolerance | Hole Position | 0.08 ( 3 mils) | |||||
| Conductor Width(W) | 20% Deviation of Master A/W |
1mil Deviation of Master A/W |
||||||
| Outline Dimension | 0.15 mm ( 6 mils) | 0.10 mm ( 4 mils) | ||||||
| Conductors & Outline ( C – O ) |
0.15 mm ( 6 mils) | 0.13 mm ( 5 mils) | ||||||
| Warp and Twist | 0.75% | 0.50% | ||||||
| 14 | Solder Mask | Max drilling tool size for via filled with Soldermask (single side) | 35.4mil | 35.4mil | ||||
| Soldermask color | Green, Black, Blue, Red, White, Yellow,Purple matte/glossy | |||||||
| Silkscreen color | White, Black,Blue,Yellow | |||||||
| Max hole size for via filled with Blue glue aluminium | 197mil | 197mil | ||||||
| Finish hole size for via filled with resin | 4-25.4mil | 4-25.4mil | ||||||
| Max aspect ratio for via filled with resin board | 8:1 | 12:1 | ||||||
| Min width of soldermask bridge | Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area) | |||||||
| Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other color,extremity 3.5mil) , 8mil( on copper area |
||||||||
| Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area) | ||||||||
| Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area) | ||||||||
| Base copper 2 oz-4 oz: 6mil, 8mil( on copper area) | ||||||||
| 15 | Surface Treatment | Lead free | Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge | |||||
| Leaded | Leaded HASL | |||||||
| Aspect ratio | 10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) | |||||||
| Max finished size | HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″； | |||||||
| Min finished size | HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″； | |||||||
| PCB thickness | HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm | |||||||
| Max high to gold finger | 1.5inch | |||||||
| Min space between gold fingers | 6mil | |||||||
| Min block space to gold fingers | 7.5mil | |||||||
| 16 | V-Cutting | Panel Size | 500mm X 622 mm ( max. ) | 500mm X 800 mm ( max. ) | ||||
| Board Thickness | 0.50 mm (20mil) min. | 0.30 mm (12mil) min. | ||||||
| Remain Thickness | 1/3 board thickness | 0.40 +/-0.10mm( 16+/-4 mil ) | ||||||
| Tolerance | ±0.13 mm(5mil) | ±0.1 mm(4mil) | ||||||
| Groove Width | 0.50 mm (20mil) max. | 0.38 mm (15mil) max. | ||||||
| Groove to Groove | 20 mm (787mil) min. | 10 mm (394mil) min. | ||||||
| Groove to Trace | 0.45 mm(18mil) min. | 0.38 mm(15mil) min. | ||||||
| 17 | Slot | Slot size tol.L≥2W | PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil) | PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil) | ||||
| NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil) | NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil) | |||||||
| 18 | Min Spacing from hole edge to hole edge | 0.30-1.60 (Hole Diameter) | 0.15mm(6mil) | 0.10mm(4mil) | ||||
| 1.61-6.50 (Hole Diameter) | 0.15mm(6mil) | 0.13mm(5mil) | ||||||
| 19 | Min spacing between hole edge to circuitry pattern | PTH hole: 0.20mm(8mil) | PTH hole: 0.13mm(5mil) | |||||
| NPTH hole: 0.18mm(7mil) | NPTH hole: 0.10mm(4mil) | |||||||
| 20 | Image transfer Registration tol | Circuit pattern vs.index hole | 0.10(4mil) | 0.08(3mil) | ||||
| Circuit pattern vs.2nd drill hole | 0.15(6mil) | 0.10(4mil) | ||||||
| 21 | Registration tolerance of front/back image | 0.075mm(3mil) | 0.05mm(2mil) | |||||
| 22 | Multilayers | Layer-layer misregistration | 4layers: | 0.15mm(6mil)max. | 4layers: | 0.10mm(4mil) max. | ||
| 6layers: | 0.20mm(8mil)max. | 6layers: | 0.13mm(5mil) max. | |||||
| 8layers: | 0.25mm(10mil)max. | 8layers: | 0.15mm(6mil) max. | |||||
| Min. Spacing from Hole Edge to Innerlayer Pattern | 0.225mm(9mil) | 0.15mm(6mil) | ||||||
| Min.Spacing from Outline to Innerlayer Pattern | 0.38mm(15mil) | 0.225mm(9mil) | ||||||
| Min. board thickness | 4layers:0.30mm(12mil) | 4layers:0.20mm(8mil) | ||||||
| 6layers:0.60mm(24mil) | 6layers:0.50mm(20mil) | |||||||
| 8layers:1.0mm(40mil) | 8layers:0.75mm(30mil) | |||||||
| Board thickness tolerance | 4layers:+/-0.13mm(5mil) | 4layers:+/-0.10mm(4mil) | ||||||
| 6layers:+/-0.15mm(6mil) | 6layers:+/-0.13mm(5mil) | |||||||
| 8-12 layers:+/-0.20mm (8mil) | 8-12 layers:+/-0.15mm (6mil) | |||||||
| 23 | Insulation Resistance | 10KΩ~20MΩ(typical:5MΩ) | ||||||
| 24 | Conductivity | <50Ω(typical:25Ω) | ||||||
| 25 | Test voltage | 250V | ||||||
| 26 | Impedance control | ±5ohm(＜50ohm), ±10%(≥50ohm) | ||||||
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
1. DHL
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
2. UPS
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
3. TNT
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
4. FedEx
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
Related Products
Rogers 4350b – The Ultimate FAQ Guide
The purpose of this Rogers 4350b: The Ultimate FAQ Guide is to provide answers to the most frequently asked questions about this versatile PCB. If you are considering purchasing this product, please read on to learn more about its pros and cons. Unlike other PCBs, it is more expensive than the competition. If you are on a tight budget, consider purchasing the Rogers 4350b. The board performs admirably, is easy to use, and is highly adaptable.
The Rogers 4350b PCB is designed for high-frequency applications. It has consistent electrical and dimensional properties and can be produced in large quantities. Unlike many other materials, it is easy to use, making it an excellent choice for high-end applications. More importantly, the best part? It’s reasonably priced. This guide will answer all your questions about how to make PCBs.
The dielectric constant of a Rogers board is an important property. The thermal coefficient decreases as the dielectric constant decreases. A lower dielectric constant indicates that your PCB is more efficient at high temperatures, while a higher value indicates that it is less efficient at low temperatures. A higher dielectric constant indicates that the PCB can handle more voltage and RF.
Rogers 4350b is not only durable but also reasonably priced. Although a little more expensive than other PCBs, it offers a wider temperature range and many other advantages. For more information on the Rogers 4350b PCB, click here.