Enhanced Performance with Rogers 5880
We make every effort to only provide you with ALLES PCBs that are long-lasting. All printed circuit boards are IPC Class 2 or 3 compliant.
- Lower cost, compared to our competitors’ price
- Versatility, and used for high-performing applications
- We have over 12 years of industry experience in PCBs
- Rogers materials are our specialty too.
Using our Rogers 5880 PCB will save you money in the long run.
Absolutely Trusty PCBTok’ Rogers 5880 PCB
Our aim is to provide PCBs with the full support of our expertise.
Rogers 5880 is an advanced material that should not go to waste.
We know how valuable resources are right now.
So, to attract new clients, we provide product samples before making significant purchases.
To put your mind at ease, we also provide you with a full CAM report prior to manufacturing.
Inquire now about our Rogers 5880 and other Rogers series products!
Rogers 5880 PCB By Feature
Glass microfiber (reinforced) PTFE composite is used in the multilayer Rogers 5880 PCB. When combined with efficient PCB stack-up, strong, interconnected copper layers result.
If lower dielectric constants are required, use High Frequency Rogers 5880 PCB. This product also gives desired low electrical loss.
Copper Foil Rogers 5880 PCB is the term used to describe the inclusion of copper foil in your Rogers 5880 PCB order. Usually, the measurement is given at 1.4mil.
Reverse Treated Rogers 5880 PCB is a specification for Rogers 5880. Used for achieving extra peel strength.
Just ask, and we can even subject your Rigid Rogers 5880 PCB to PCB assembly, or any others including Box Build and/or Prototype PCB assembly.
Teflon Rogers 5880 PCB is designed to meet the required demand for minimum outgassing. In addition, it also conforms to low isotropic demand.
Rogers 5880 PCB By Copper Thickness & Cladding (6)
It is a special request for 0.5 oz Rogers 5880 PCB. Because the majority of oz of PCB is contained in 1 oz. Even still, low dissipation factor is achieved.
The finest characteristic of 1 oz Rogers 5880 PCB is better signal integrity. The board is utilized for High Tg applications when paired with HTE foils.
ED copper foil can be utilized if the High Frequency board is used. For maximum effect on power, 2 oz Rogers 5880 PCB is recommended.
Copper Cladding Rogers 5880 PCB is designed to be sliced and sheared well by PCB cutting machines and used cutting machines.
Aluminum cladding can be requested in Aluminum Cladding Rogers 5880 PCB. Apart from this, you can ask for custom layer count.
Brass Plate Cladding Rogers 5880 PCB Rogers 5880 PCB incorporates metal cladding (a brass plate) in the circuit board’s laminate.
Rogers 5880 PCB By Usage (5)
PTFE PCB, Ceramic Rigid PCB, and Teflon Rigid PCB have many similar benefits. The mmWave Rogers 5880 PCB product is listed beside these two items.
When you specify a Rogers PCB product, such as the Rogers 5880 PCB, you are referring to the use of PTFE PCB for RF/ microwave frequency.
Microwave Rogers 5880 PCB feature a long wavelength and a low frequency rather than a high frequency. For applications, range: 1 -1000 GHz.
Stripline Rogers 5880 PCBs use low-temperature co-fired ceramics, therefore the PTFE composite in this Rogers 5880 material is ideal.
The dielectric constant is critical in the Microstripline Rogers 5880 PCB. Used in PCB transmission lines.
Rogers 5880 PCB
PCBTok can offer 24h online support for you. When you have any PCB-related questions, please feel free to get in touch.
PCBTok can build your PCB prototypes quickly. We also provide 24 hour production for quick-turn PCBs at our facility.
We often ship goods by international forwarders such as UPS, DHL, and FedEx. If they are urgent, we use priority express service.
PCBTok has passed ISO9001 and 14001, and also has USA and Canada UL certifications. We strictly follow IPC class 2 or class 3 standards for our products.
A Rogers 5880 to Satisfy Your Needs
Rogers 5880 by PCBTok is a well-known and well-regarded product.
PCBTok strives towards excellence rather than averageness.
We have many customers all over the world who come to us for precision work.
Please inquire from our friendly sales team now.
Your Rogers 5880 PCB can be specified according to your device specs.
Efficiently Producing Rogers 5880 PCB
As Your Amazing PCB Supplier, PCBTok brings the following features for your Rogers 588o order:
- All PCBs designed for military usage are IPC Class 3 approved
- Our staff is fully prepared to assist you with any custom/prototype PCB.
- A large number of high-count layer alternatives are available.
- Manufacture of our PCB in accordance with ISO-9001:2015
PCBTok is the key to speeding up your device’s production.
Supporting Your Digital Capabilities
We guarantee value for money since PCBTok’s Rogers 5880 is precisely constructed.
The PCB structure is meticulously considered for this type of material in order to obtain a correct finished product.
We want you to have output that is easy to cut, convenient to put through equipment, and has a minimal outgassing property.
Aside from the efficiency of the Rogers 5880 PCBs, we also consider our customers’ sometimes unique needs.
Smooth Performance with PCBTok’s Rogers 5880
We make numerous versions on the Rogers 5880.
Even if you require our EMS service, we make your life easy.
We accommodate production if it is with electrodeposited copper laminate (cladding).
Furthermore, we can supply Rogers 5880 with Reverse Treated foil for high temperature applications.
Our process for tracing electronic boards is also excellent.
This results in Rogers 5880 that’s trouble-free.
Rogers 5880 PCB Fabrication
The high-frequency, RF, and microwave PCBs made from Rogers 5880 are commendable.
We are well-known for making these PCBs that have a higher cabling concentration.
This characteristic making the product an excellent alternative for aerospace devices.
A Rogers 5880 PCB has a minimal volume and dimensions, but it has a lot of electrical mobility. Order now! Or ask us for more details about Rogers 5880 items, if you wish.
We assist your every PCB need to the best of our abilities by conducting thorough PCB tests.
These include the usual AOI test, the microsection analysis, and so much more.
To see is to believe, so if you want a soldering sample, we’ll send it fast.
Finally, for greater accuracy, our fully-functional CAD program can provide you with 3D renderings.
You can then review your new and fresh Rogers 5880 order.
OEM & ODM Rogers 5880 PCB Applications
Rogers 5880 PCB is used for Aerospace Gear because Rogers parts have few flaws and are dependable for high-quality PCB material.
The Rogers 5880 can be used to power radio antennas that use RF. This PCB material is capable of performing hard tasks for broad casting purposes.
Rogers 5880 PCB is very much beneficial to organizations in the Semiconductor industry. Many different types of ICs and IC substrates can benefit.
Rogers 5880 PCB can be used in military applications such as communication channels, naval deployment, and GPS location.
Rogers 5880 PCB for Internet & Communication must be of the Impedance Control type, which is provided by Rogers Teflon material.
Rogers 5880 PCB Production Details As Following Up
- Production Facility
- PCB Capabilities
- Shipping Method
- Payment Methods
- Send Us Inquiry
|1||Layer Count||1-20 layers||22-40 layer|
|2||Base Material||KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)|
|3||PCB Type||Rigid PCB/FPC/Flex-Rigid||Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.|
|4||Lamination type||Blind&buried via type||Mechanical blind&burried vias with less than 3 times laminating||Mechanical blind&burried vias with less than 2 times laminating|
|HDI PCB||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating||1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating|
|5||Finished Board Thickness||0.2-3.2mm||3.4-7mm|
|6||Minimum Core Thickness||0.15mm(6mil)||0.1mm(4mil)|
|7||Copper Thickness||Min. 1/2 OZ, Max. 4 OZ||Min. 1/3 OZ, Max. 10 OZ|
|9||Maximum Board Size||500*600mm(19”*23”)||1100*500mm(43”*19”)|
|10||Hole||Min laser drilling size||4mil||4mil|
|Max laser drilling size||6mil||6mil|
|Max aspect ratio for Hole plate||10:1（hole diameter＞8mil）||20:1|
|Max aspect ratio for laser via filling plating||0.9:1(Depth included copper thickness)||1:1(Depth included copper thickness)|
|Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
|0.8:1(drilling tool size≥10mil)||1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)|
|Min. depth of Mechanical depth-control(back drill)||8mil||8mil|
|Min gap between hole wall and
conductor (None blind and buried via PCB)
|Min gap between hole wall conductor (Blind and buried via PCB)||8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating)||7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)|
|Min gab between hole wall conductor(Laser blind hole buried via PCB)||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）||7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）|
|Min space between laser holes and conductor||6mil||5mil|
|Min space between hole walls in different net||10mil||10mil|
|Min space between hole walls in the same net||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)||6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)|
|Min space bwteen NPTH hole walls||8mil||8mil|
|Hole location tolerance||±2mil||±2mil|
|Pressfit holes tolerance||±2mil||±2mil|
|Countersink depth tolerance||±6mil||±6mil|
|Countersink hole size tolerance||±6mil||±6mil|
|11||Pad(ring)||Min Pad size for laser drillings||10mil(for 4mil laser via),11mil(for 5mil laser via)||10mil(for 4mil laser via),11mil(for 5mil laser via)|
|Min Pad size for mechanical drillings||16mil(8mil drillings)||16mil(8mil drillings)|
|Min BGA pad size||HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold)||HASL:10mil, LF HASL:12mil, other surface technics are 7mi|
|Pad size tolerance(BGA)||±1.5mil(pad size≤10mil);±15%(pad size>10mil)||±1.2mil(pad size≤12mil);±10%(pad size≥12mil)|
|1OZ: 3/4mil||1OZ: 3/4mil|
|2OZ: 4/5.5mil||2OZ: 4/5mil|
|3OZ: 5/8mil||3OZ: 5/8mil|
|4OZ: 6/11mil||4OZ: 6/11mil|
|5OZ: 7/14mil||5OZ: 7/13.5mil|
|6OZ: 8/16mil||6OZ: 8/15mil|
|7OZ: 9/19mil||7OZ: 9/18mil|
|8OZ: 10/22mil||8OZ: 10/21mil|
|9OZ: 11/25mil||9OZ: 11/24mil|
|10OZ: 12/28mil||10OZ: 12/27mil|
|1OZ: 4.8/5mil||1OZ: 4.5/5mil|
|1.43OZ（negative ）:5/8||1.43OZ（negative ）:5/7|
|2OZ: 6/8mil||2OZ: 6/7mil|
|3OZ: 6/12mil||3OZ: 6/10mil|
|4OZ: 7.5/15mil||4OZ: 7.5/13mil|
|5OZ: 9/18mil||5OZ: 9/16mil|
|6OZ: 10/21mil||6OZ: 10/19mil|
|7OZ: 11/25mil||7OZ: 11/22mil|
|8OZ: 12/29mil||8OZ: 12/26mil|
|9OZ: 13/33mil||9OZ: 13/30mil|
|10OZ: 14/38mil||10OZ: 14/35mil|
|13||Dimension Tolerance||Hole Position||0.08 ( 3 mils)|
|Conductor Width(W)||20% Deviation of Master
|1mil Deviation of Master
|Outline Dimension||0.15 mm ( 6 mils)||0.10 mm ( 4 mils)|
|Conductors & Outline
( C – O )
|0.15 mm ( 6 mils)||0.13 mm ( 5 mils)|
|Warp and Twist||0.75%||0.50%|
|14||Solder Mask||Max drilling tool size for via filled with Soldermask (single side)||35.4mil||35.4mil|
|Soldermask color||Green, Black, Blue, Red, White, Yellow,Purple matte/glossy|
|Silkscreen color||White, Black,Blue,Yellow|
|Max hole size for via filled with Blue glue aluminium||197mil||197mil|
|Finish hole size for via filled with resin||4-25.4mil||4-25.4mil|
|Max aspect ratio for via filled with resin board||8:1||12:1|
|Min width of soldermask bridge||Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)|
|Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
|Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)|
|Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)|
|Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)|
|15||Surface Treatment||Lead free||Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge|
|Aspect ratio||10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)|
|Max finished size||HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″；|
|Min finished size||HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″；|
|PCB thickness||HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm|
|Max high to gold finger||1.5inch|
|Min space between gold fingers||6mil|
|Min block space to gold fingers||7.5mil|
|16||V-Cutting||Panel Size||500mm X 622 mm ( max. )||500mm X 800 mm ( max. )|
|Board Thickness||0.50 mm (20mil) min.||0.30 mm (12mil) min.|
|Remain Thickness||1/3 board thickness||0.40 +/-0.10mm( 16+/-4 mil )|
|Tolerance||±0.13 mm(5mil)||±0.1 mm(4mil)|
|Groove Width||0.50 mm (20mil) max.||0.38 mm (15mil) max.|
|Groove to Groove||20 mm (787mil) min.||10 mm (394mil) min.|
|Groove to Trace||0.45 mm(18mil) min.||0.38 mm(15mil) min.|
|17||Slot||Slot size tol.L≥2W||PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil)||PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil)|
|NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil)||NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil)|
|18||Min Spacing from hole edge to hole edge||0.30-1.60 (Hole Diameter)||0.15mm(6mil)||0.10mm(4mil)|
|1.61-6.50 (Hole Diameter)||0.15mm(6mil)||0.13mm(5mil)|
|19||Min spacing between hole edge to circuitry pattern||PTH hole: 0.20mm(8mil)||PTH hole: 0.13mm(5mil)|
|NPTH hole: 0.18mm(7mil)||NPTH hole: 0.10mm(4mil)|
|20||Image transfer Registration tol||Circuit pattern vs.index hole||0.10(4mil)||0.08(3mil)|
|Circuit pattern vs.2nd drill hole||0.15(6mil)||0.10(4mil)|
|21||Registration tolerance of front/back image||0.075mm(3mil)||0.05mm(2mil)|
|22||Multilayers||Layer-layer misregistration||4layers:||0.15mm(6mil)max.||4layers:||0.10mm(4mil) max.|
|Min. Spacing from Hole Edge to Innerlayer Pattern||0.225mm(9mil)||0.15mm(6mil)|
|Min.Spacing from Outline to Innerlayer Pattern||0.38mm(15mil)||0.225mm(9mil)|
|Min. board thickness||4layers:0.30mm(12mil)||4layers:0.20mm(8mil)|
|Board thickness tolerance||4layers:+/-0.13mm(5mil)||4layers:+/-0.10mm(4mil)|
|8-12 layers:+/-0.20mm (8mil)||8-12 layers:+/-0.15mm (6mil)|
|26||Impedance control||±5ohm(＜50ohm), ±10%(≥50ohm)|
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
“My business partner and I were seeking for a strong team to help us finish our RF PCB project. We were extremely fortunate to work with PCBTok. Mr. A was our sales representative. He was fantastic! Very professional, kind, and informed. We got a wonderful deal. We are incredibly pleased. We wholly support him and this PCBTok. Thank you very much, that was a splendid job.”Justin Maupilé, Associate Engineer from Geneva, Switzerland
“I made a good choice with PCBTok. They made the normally arduous process of switching from a local supply of PCB to one in China simple and somewhat enjoyable! I am quite grateful to them and would recommend dealing with them the next time you need a PCB fabricator and assembler! Our Box Build order is the one after the current one is shipped.”Nicholas Payenneville, Logistics Supervisor from Los Altos, California
“This was our first time looking for a PCB provider who was not local. It was difficult for my team to go through the entire arduous process, but PCBTok was really patient and straightforward about what needed to happen and when. We are quite pleased with our PCB source! Thank you to your entire staff. We are now saving money and receiving parts on schedule.”Marvin Balasubramaniam, Procurement Category Manager from Singapore
Rogers 5880 – The Ultimate FAQ Guide
The Ultimate FAQ Guide is a great resource for a comprehensive guide to the Rogers 5880. It will answer all your questions about the 5880, from its benefits to its operation. The Ultimate FAQ Guide will also provide you with helpful tips to help you choose the best product for your specific needs. You can also learn about the benefits of the Rogers 5880 and which applications it is best suited for.
The Rogers 5880 PCB is ideally suited for high-volume production and complex circuits. Its low coefficient of thermal expansion and isotropic properties make it ideal for a wide range of projects from consumer electronics to high tech. This material can also be used for high-frequency and temperature-sensitive applications. Its low coefficient of thermal expansion ensures excellent electrical performance and long service life at high frequencies. It has a wide range of dielectric constants for a wide range of applications.
Tg is an important consideration in microwave applications. This is also known as the dissipation factor. This is the measurable inefficiency of a PCB dielectric material. Its Tg indicates its sensitivity to the microwave spectrum. Rogers 5880 PCBs with high frequencies have a low dissipation factor.
What are the advantages of the Rogers 5880? The Rogers 5880 PCB is made of high-quality materials such as glass microfiber for improved data transmission. The copper cladding and pads on the Rogers 5880 PCB also help with data transfer. Finally, the PCB is environmentally friendly and reasonably priced, making it an excellent choice for high-volume projects.