Change Language
Exclusively Designed Solar Panel PCB from PCBTok
PCBTok always strives to produce quality Solar Panel PCB; hence, we only utilize high-class raw resources on the board to attain optimum performance during operation.
- Every necessary check has been completed (E-Test and AOI).
- Twelve (12) years of experience manufacturing PCBs.
- We only use PCBs that adhere to IPC Classes 2 or 3.
- We have highly qualified professionals always on standby to assist you.
- We offer return services within 24 hours of the acquisition.
Enhanced Quality of Solar Panel PCB Products by PCBTok
We’re only using sophisticated materials and advanced technologies to produce your Solar Panel PCB; we are continuously improving the quality of our products.
Our professional team is continuously working hard to enhance our products’ performance to ensure they are at par and can perform almost all applications.
All of our products are subjected to meticulous production processes and thorough inspections to guarantee they can satisfy the customer’s specifications.
With PCBTok, your specifications are our top priority.
PCBTok continuously aims to provide our consumers with the best they deserve; we will wholeheartedly serve your PCB needs and demands.
Solar Panel PCB By Feature
The Solar Street Light Panel PCB is among the most common and popular uses of this kind of board. They are frequently deployed in this area since they have easy access to solar energy, which is the sun.
The Solar Cell Power Bank PCB is a very efficient device nowadays because it is very convenient. Since power banks are hand-carry devices, they can be easily charged using the sun’s rays outdoors.
The Solar Water Pump Panel PCB is becoming popular in the industrial and household sectors since most require water conversion. It aids the heated water that flows inside the home or buildings.
The Solar Panel Charger PCB has quite a similar purpose as the power bank; however, they can be utilized inside the household even if there’s electricity. Nevertheless, solar energy will power it.
The Solar Water Heater Panel PCB is quite similar to the water pump; with a more specific purpose: to heat the water using the solar that it acquires from the sun’s rays. It is commonly used in households.
The Outdoor Solar Panel PCB is another common usage of this kind of board; a street light belongs to this category. The government utility frequently utilizes them to reduce the country’s electric bills.
Solar Panel PCB By Layer (5)
-
The Single-Sided Layer PCB that we incorporate in this board is ideal for simple low-density designs and high-volume types of purchases; they can be perfectly suitable for charger and power bank devices.
-
The Double-Sided Layer PCB that we integrate into this board has enhanced heat dissipation. They are frequently preferred in complex-type of designs such as for the industrial and commercial type of applications.
-
The 4-Layer PCB we deploy in this particular board has better EMI shield, enhanced thermal management and improved signal routing. Thus, they are frequently deployed on mobile phones and file server devices.
-
The 6-Layer PCB that we incorporate in this specific board is particularly suitable for high-speed and high-frequency design applications. It is a high-quality type of board, lightweight, and has exceptional electrical properties.
-
The 8-Layer PCB that we deploy in this particular board offers reduced occurrences of vulnerability that can tolerate external forces; it has enhanced overall performance. They are commonly used in industrial applications.
Solar Panel PCB By Surface Finish (5)
-
The HASL PCB that we deploy in this particular board is lead-free to ensure that it is RoHS compliant; hence, it is ecologically friendly. In addition, it is the most well-known finish in the industry because of its excellent solderability.
-
The OSP PCB we apply in this specific board can be your ideal option if you’re seeking an affordable finish with good quality output. Also, it offers excellent flatness. However, it has a shorter shelf-life compared to others.
-
The ENIG PCB that we integrate into this kind of board is highly durable and reliable; we always ensure that it can be stored for longer shelf life. They are ideal for a smaller type of components, and it has excellent flatness.
-
The Hard Gold PCB that we incorporate in this particular board has no presence of lead; hence, they are economical. In addition, it has a hard and durable surface and a longer shelf-life. However, it can be costly.
-
The Carbon Ink PCB we deploy in the specific board is the perfect surface finish for you if you’re seeking an affordable treatment but has stable quality and performance. Also, it has high wear resistance and is economical.
Features of a Solar Panel PCB
The following are the primary features you can enjoy in a Solar PCB:
- Energy Conversion – It is the most convenient and quick way to convert thermal energy into electrical energy.
- Convenience – It is possible to deploy the small types of this board into the large-size kinds of Solar Panelboards.
- Customization – This kind of board offers the possibility of customizability options.
- Power Conversion – The processing time of power conversion is relatively low due to this kind of board.
These are some features you can enjoy in a Solar Panel PCB. Inquire today for more details regarding this type of board.
Considerations to Take Before Purchasing Solar Panel PCB
We recommend looking out for these factors before you purchase this kind of board to avoid additional costs in the future. Here is some of it:
- System – We suggest checking the compatibility of the board with your device.
- Battery – It is recommended to have an energy storage battery along this board.
- Cost – It can be expensive to purchase this board; hence, ensure you have enough before purchasing one.
- Manufacturer – We strongly advise choosing a producer with extensive industry experience.
- Specifications – We recommend having clear and concise board requirements.
Perks of Solar Panel PCB
This type of board can offer various advantages; this includes the following:
- Convenience – It is made easy to convert solar energy into electrical energy.
- Personalization – It has more freedom in integrating additional components.
- Configuration – It is relatively easy to configure, and it can be easily manufactured with the help of sophisticated technologies.
- Maintenance – It can be easily maintained, reducing repair costs.
Applications – Almost all industries nowadays prefer to utilize this kind of board because of its wide array of benefits, including its renewable energy source capability
PCBTok Specializes in Providing Remarkable Solar Panel PCB
PCBTok is one of China’s biggest PCB Manufacturers; we have more than a decade of experience providing quality products to our consumers, including Solar PCB Panels. Moreover, we are capable of fulfilling your desired board.
In addition, choosing the proper manufacturer with extensive experience in the industry can significantly impact the final product quality and performance.
All our PCB products are made using modern and up-to-date machinery and technologies to ensure they are of their highest quality. Additionally, we can guarantee that all our components and materials are of the highest quality.
We are one of the top PCB Manufacturers globally; thus, you can guarantee that we will only provide you with affordable but quality output.
Inquire today, and have your board manufactured by us today!
Solar Panel PCB Fabrication
Every product has its pros and cons; this board is no exemption. Despite its numerous benefits, it has some disadvantages.
One of its cons is its price; it can be expensive to produce. However, PCBTok can provide you with the best offers to reduce your costs.
Then, the assembly of this kind of board can be complex. Nevertheless, choosing a manufacturer with adequate experience can significantly help.
Regarding its connectivity, it should be well-engineered and designed; hence, we suggest going for a producer with highly-skilled personnel.
All of these limitations can be prevented through the proper manufacturer. Contact us today, and we’ll ensure you never experience any of this.
There are numerous cases wherein a PCB can fail, and this board has factors that cause its failure; we’ll share some of them with you.
First, it could be because of low-quality manufacturing. Thus, selecting a trusted and reputable manufacturer in the market is crucial.
Secondly, it could be because of rough usage. All competent producers provide safety instructions; we advise following that manual.
Finally, it could be due to a lack of maintenance. Even if you choose the most skilled manufacturer, without care, it will malfunction.
These are all the possible failure causes you may encounter in this kind of PCB; however, if you choose PCBTok, we will thoroughly educate you.
OEM & ODM Solar Panel PCB Applications
Most consumer electronics nowadays adapt to this technology for storing and converting energies because of its cost-saving and economical feature.
Since this kind of board is capable of large-scale energy conversions, they are widely deployed in most equipment and devices in the industrial industry.
One of the advantages of this particular board is its efficient storage and conversion energy; hence, they are frequently used in this type of equipment.
Due to the higher rate of electrical bills nowadays, many households prefer this kind of board as their energy source to prevent further electrical expenses.
Almost all commercial industry is adapting to this kind o technology because of its energy-saving feature; they are installed mainly by government entities.
Solar Panel PCB Production Details As Following Up
- Production Facility
- PCB Capabilities
- Shipping Methods
- Payment Methods
- Send Us Inquiry
| NO | Item | Technical Specification | ||||||
| Standard | Advanced | |||||||
| 1 | Layer Count | 1-20 layers | 22-40 layer | |||||
| 2 | Base Material | KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) | ||||||
| 3 | PCB Type | Rigid PCB/FPC/Flex-Rigid | Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. | |||||
| 4 | Lamination type | Blind&buried via type | Mechanical blind&burried vias with less than 3 times laminating | Mechanical blind&burried vias with less than 2 times laminating | ||||
| HDI PCB | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | ||||||
| 5 | Finished Board Thickness | 0.2-3.2mm | 3.4-7mm | |||||
| 6 | Minimum Core Thickness | 0.15mm(6mil) | 0.1mm(4mil) | |||||
| 7 | Copper Thickness | Min. 1/2 OZ, Max. 4 OZ | Min. 1/3 OZ, Max. 10 OZ | |||||
| 8 | PTH Wall | 20um(0.8mil) | 25um(1mil) | |||||
| 9 | Maximum Board Size | 500*600mm(19”*23”) | 1100*500mm(43”*19”) | |||||
| 10 | Hole | Min laser drilling size | 4mil | 4mil | ||||
| Max laser drilling size | 6mil | 6mil | ||||||
| Max aspect ratio for Hole plate | 10:1（hole diameter＞8mil） | 20:1 | ||||||
| Max aspect ratio for laser via filling plating | 0.9:1(Depth included copper thickness) | 1:1(Depth included copper thickness) | ||||||
| Max aspect ratio for mechanical depth- control drilling board(Blind hole drilling depth/blind hole size) |
0.8:1(drilling tool size≥10mil) | 1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil) | ||||||
| Min. depth of Mechanical depth-control(back drill) | 8mil | 8mil | ||||||
| Min gap between hole wall and conductor (None blind and buried via PCB) |
7mil(≤8L),9mil(10-14L),10mil(＞14L) | 5.5mil(≤8L),6.5mil(10-14L),7mil(＞14L) | ||||||
| Min gap between hole wall conductor (Blind and buried via PCB) | 8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating) | 7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating) | ||||||
| Min gab between hole wall conductor(Laser blind hole buried via PCB) | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | ||||||
| Min space between laser holes and conductor | 6mil | 5mil | ||||||
| Min space between hole walls in different net | 10mil | 10mil | ||||||
| Min space between hole walls in the same net | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | ||||||
| Min space bwteen NPTH hole walls | 8mil | 8mil | ||||||
| Hole location tolerance | ±2mil | ±2mil | ||||||
| NPTH tolerance | ±2mil | ±2mil | ||||||
| Pressfit holes tolerance | ±2mil | ±2mil | ||||||
| Countersink depth tolerance | ±6mil | ±6mil | ||||||
| Countersink hole size tolerance | ±6mil | ±6mil | ||||||
| 11 | Pad(ring) | Min Pad size for laser drillings | 10mil(for 4mil laser via),11mil(for 5mil laser via) | 10mil(for 4mil laser via),11mil(for 5mil laser via) | ||||
| Min Pad size for mechanical drillings | 16mil(8mil drillings) | 16mil(8mil drillings) | ||||||
| Min BGA pad size | HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold) | HASL:10mil, LF HASL:12mil, other surface technics are 7mi | ||||||
| Pad size tolerance(BGA) | ±1.5mil(pad size≤10mil);±15%(pad size>10mil) | ±1.2mil(pad size≤12mil);±10%(pad size≥12mil) | ||||||
| 12 | Width/Space | Internal Layer | 1/2OZ：3/3mil | 1/2OZ：3/3mil | ||||
| 1OZ: 3/4mil | 1OZ: 3/4mil | |||||||
| 2OZ: 4/5.5mil | 2OZ: 4/5mil | |||||||
| 3OZ: 5/8mil | 3OZ: 5/8mil | |||||||
| 4OZ: 6/11mil | 4OZ: 6/11mil | |||||||
| 5OZ: 7/14mil | 5OZ: 7/13.5mil | |||||||
| 6OZ: 8/16mil | 6OZ: 8/15mil | |||||||
| 7OZ: 9/19mil | 7OZ: 9/18mil | |||||||
| 8OZ: 10/22mil | 8OZ: 10/21mil | |||||||
| 9OZ: 11/25mil | 9OZ: 11/24mil | |||||||
| 10OZ: 12/28mil | 10OZ: 12/27mil | |||||||
| External Layer | 1/3OZ：3.5/4mil | 1/3OZ：3/3mil | ||||||
| 1/2OZ：3.9/4.5mil | 1/2OZ：3.5/3.5mil | |||||||
| 1OZ: 4.8/5mil | 1OZ: 4.5/5mil | |||||||
| 1.43OZ（positive）:4.5/7 | 1.43OZ（positive）:4.5/6 | |||||||
| 1.43OZ（negative ）:5/8 | 1.43OZ（negative ）:5/7 | |||||||
| 2OZ: 6/8mil | 2OZ: 6/7mil | |||||||
| 3OZ: 6/12mil | 3OZ: 6/10mil | |||||||
| 4OZ: 7.5/15mil | 4OZ: 7.5/13mil | |||||||
| 5OZ: 9/18mil | 5OZ: 9/16mil | |||||||
| 6OZ: 10/21mil | 6OZ: 10/19mil | |||||||
| 7OZ: 11/25mil | 7OZ: 11/22mil | |||||||
| 8OZ: 12/29mil | 8OZ: 12/26mil | |||||||
| 9OZ: 13/33mil | 9OZ: 13/30mil | |||||||
| 10OZ: 14/38mil | 10OZ: 14/35mil | |||||||
| 13 | Dimension Tolerance | Hole Position | 0.08 ( 3 mils) | |||||
| Conductor Width(W) | 20% Deviation of Master A/W |
1mil Deviation of Master A/W |
||||||
| Outline Dimension | 0.15 mm ( 6 mils) | 0.10 mm ( 4 mils) | ||||||
| Conductors & Outline ( C – O ) |
0.15 mm ( 6 mils) | 0.13 mm ( 5 mils) | ||||||
| Warp and Twist | 0.75% | 0.50% | ||||||
| 14 | Solder Mask | Max drilling tool size for via filled with Soldermask (single side) | 35.4mil | 35.4mil | ||||
| Soldermask color | Green, Black, Blue, Red, White, Yellow,Purple matte/glossy | |||||||
| Silkscreen color | White, Black,Blue,Yellow | |||||||
| Max hole size for via filled with Blue glue aluminium | 197mil | 197mil | ||||||
| Finish hole size for via filled with resin | 4-25.4mil | 4-25.4mil | ||||||
| Max aspect ratio for via filled with resin board | 8:1 | 12:1 | ||||||
| Min width of soldermask bridge | Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area) | |||||||
| Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other color,extremity 3.5mil) , 8mil( on copper area |
||||||||
| Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area) | ||||||||
| Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area) | ||||||||
| Base copper 2 oz-4 oz: 6mil, 8mil( on copper area) | ||||||||
| 15 | Surface Treatment | Lead free | Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge | |||||
| Leaded | Leaded HASL | |||||||
| Aspect ratio | 10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) | |||||||
| Max finished size | HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″； | |||||||
| Min finished size | HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″； | |||||||
| PCB thickness | HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm | |||||||
| Max high to gold finger | 1.5inch | |||||||
| Min space between gold fingers | 6mil | |||||||
| Min block space to gold fingers | 7.5mil | |||||||
| 16 | V-Cutting | Panel Size | 500mm X 622 mm ( max. ) | 500mm X 800 mm ( max. ) | ||||
| Board Thickness | 0.50 mm (20mil) min. | 0.30 mm (12mil) min. | ||||||
| Remain Thickness | 1/3 board thickness | 0.40 +/-0.10mm( 16+/-4 mil ) | ||||||
| Tolerance | ±0.13 mm(5mil) | ±0.1 mm(4mil) | ||||||
| Groove Width | 0.50 mm (20mil) max. | 0.38 mm (15mil) max. | ||||||
| Groove to Groove | 20 mm (787mil) min. | 10 mm (394mil) min. | ||||||
| Groove to Trace | 0.45 mm(18mil) min. | 0.38 mm(15mil) min. | ||||||
| 17 | Slot | Slot size tol.L≥2W | PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil) | PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil) | ||||
| NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil) | NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil) | |||||||
| 18 | Min Spacing from hole edge to hole edge | 0.30-1.60 (Hole Diameter) | 0.15mm(6mil) | 0.10mm(4mil) | ||||
| 1.61-6.50 (Hole Diameter) | 0.15mm(6mil) | 0.13mm(5mil) | ||||||
| 19 | Min spacing between hole edge to circuitry pattern | PTH hole: 0.20mm(8mil) | PTH hole: 0.13mm(5mil) | |||||
| NPTH hole: 0.18mm(7mil) | NPTH hole: 0.10mm(4mil) | |||||||
| 20 | Image transfer Registration tol | Circuit pattern vs.index hole | 0.10(4mil) | 0.08(3mil) | ||||
| Circuit pattern vs.2nd drill hole | 0.15(6mil) | 0.10(4mil) | ||||||
| 21 | Registration tolerance of front/back image | 0.075mm(3mil) | 0.05mm(2mil) | |||||
| 22 | Multilayers | Layer-layer misregistration | 4layers: | 0.15mm(6mil)max. | 4layers: | 0.10mm(4mil) max. | ||
| 6layers: | 0.20mm(8mil)max. | 6layers: | 0.13mm(5mil) max. | |||||
| 8layers: | 0.25mm(10mil)max. | 8layers: | 0.15mm(6mil) max. | |||||
| Min. Spacing from Hole Edge to Innerlayer Pattern | 0.225mm(9mil) | 0.15mm(6mil) | ||||||
| Min.Spacing from Outline to Innerlayer Pattern | 0.38mm(15mil) | 0.225mm(9mil) | ||||||
| Min. board thickness | 4layers:0.30mm(12mil) | 4layers:0.20mm(8mil) | ||||||
| 6layers:0.60mm(24mil) | 6layers:0.50mm(20mil) | |||||||
| 8layers:1.0mm(40mil) | 8layers:0.75mm(30mil) | |||||||
| Board thickness tolerance | 4layers:+/-0.13mm(5mil) | 4layers:+/-0.10mm(4mil) | ||||||
| 6layers:+/-0.15mm(6mil) | 6layers:+/-0.13mm(5mil) | |||||||
| 8-12 layers:+/-0.20mm (8mil) | 8-12 layers:+/-0.15mm (6mil) | |||||||
| 23 | Insulation Resistance | 10KΩ~20MΩ(typical:5MΩ) | ||||||
| 24 | Conductivity | <50Ω(typical:25Ω) | ||||||
| 25 | Test voltage | 250V | ||||||
| 26 | Impedance control | ±5ohm(＜50ohm), ±10%(≥50ohm) | ||||||
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
1. DHL
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
2. UPS
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
3. TNT
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
4. FedEx
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
