The Finest SSD PCB Available in the Market

The SSD PCB is fast replacing Hard Disks and Hard Drives in the computer industry.

You would need a reputable supplier to give you the best value money can buy with this type of gear.

PCBTok is a professional PCB maker that has been in the market for more than 10 years.

During this period, we have learnt a lot about what works and what doesn’t when it comes to manufacturing computer-related PCBs.

Get Our Best Quotation
Quick Quote

We’re the Best Since 2008

Since 2008, PCBTok has been a top supplier of PCBs, offering only the best goods to our clients.

Our selection of PCBs for computers like the SSD PCB is comprehensive.

Choose us because we have enough raw materials on hand to fulfill your orders, anytime.

There’s also no minimum quantity is required for your new order.

Deals with us come with 24-hour sales and technical assistance

Contact us now to avail!

In this article, we provide all the information you could possibly need.

We save you the time and effort of further product research.

Read More

SSD PCB By Feature

Computer SSD PCB

Our computer PCBs are constructed from sturdy fiberglass and FR4. These boards are quality tested so they should last you years if used in a responsible way.

Laptop SSD PCB

Our quality guarantee will help this multipurpose item give you satisfaction with your laptop. Maximum performance is guaranteed.

Mobile Device SSD PCB

Since mobile equipment are extremely sensitive to incorrect setups, you need quality SSD materials that are carefully constructed from a manufacturer like us.

4 Layer SSD PCB

We regularly produce SSD PCBs with 4 layers in large quantities. It’s used by businesses, consumers, and gamers.

6 Layer SSD PCB

If you utilize this PCB, the motherboard PCB will be in better working order. It can be designated for many applications.

8 Layer SSD PCB

For some PCB customers, they need customized layers for complex devices. New digital devices now call for more layers.

Explain What is SSD PCB

Your computer’s motherboard might well have an SSD inside it now.

Customers started choosing this over the hard drive or hard disk in recent years.

The Solid State Drive’s internal circuit board is known as the SSD PCB.

However, the SSD is made up of more than just the PCB. The SSD includes in it the interface, the controller, and the flash memory (NAND).

The most essential part is the controller – as this links the flash memory to the I/O interfaces.

SSDs are chosen over hard drives because they operate more quickly and quietly.

Explain What is SSD PCB
SSD PCB Features

SSD PCB Features

The PCB within an SSD includes the following characteristics:

Layers – Typically, this kind of PCB would consist of 4–8 layers.

Controller – The kind of controller needed depends on the appliance for which the SSD is intended. The IC is another name for the controller. It is the SSD’s most crucial component.

Flash – This uses Floating Gate Transistors to store the memory (FTGs).

Interface(s) – The SSD can link to other computer systems thanks to one or more of its interfaces. The USB interface is a common example.

How Does the SSD PCB Work?

The following principles describe how SSDs function as circuit boards:

  • An integrated circuit, often known as an IC, houses computer memory.
  • The circuit board has the IC placed on it.
  • The data is recorded in NAND inside the IC and is in memory form.
  • NAND is a non-volatile type of memory that stores data without the need for power. The drive’s KB, MB, and TB figures are made up of blocks and grids where the data is kept.
How Does the SSD PCB Work

Where Do You Buy Good SSD PCBs?

Where Do You Buy Good SSD PCB
Where Do You Buy Good SSD PCBs

You deserve only the finest components and materials in your SSD. This is an essential part of PCs.

In our plant, we adhere to world-class PCB manufacturing practices.

This guarantees that the item you receive will function well in any scenario, whether it is for an industrial setting or a home computer setting.

If you order something customized, our team will comprehensively follow your specs in creating your boards.

Please go ahead and contact us for more details.

SSD PCB Fabrication

SSD PCB Applications

There are many different kinds of SSD applications. Here are the typical ones:

  • Industrial/Business/Commercial Use – Big offices, servers, and data storage units
  • Personal Use – for home office and student use
  • Gaming
  • Mobile Devices – including smartphones and tablets
  • Anywhere a laptop is used
  • Communication devices in general
SSD PCB Components

Here, we offer some useful information about the key components of this kind of circuit board.

  • NAND flash memory – the most common form compared to the one next
  • Flash card – this is from older designs of SSD, it’s outgoing.
  • SSDs with SATA interfaces have an AHCI controller interface.
  • NVMe SSD in M.2 form size and PCle sockets

Other minor mounted components, such as the capacitors as a safeguard feature

Schematic PCB banner 1
Guaranteed 100% Functioning SSD PCB

We constantly make sure to test your PCB items

So that the product you receive will operate correctly.

SSD PCB Production Details As Following Up

NO Item Technical Specification
Standard Advanced
1 Layer Count 1-20 layers 22-40 layer
2 Base Material KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4)
3 PCB Type Rigid PCB/FPC/Flex-Rigid Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill.
4 Lamination type Blind&buried via type Mechanical blind&burried vias with less than 3 times laminating Mechanical blind&burried vias with less than 2 times laminating
HDI PCB 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating
5 Finished Board Thickness 0.2-3.2mm 3.4-7mm
6 Minimum Core Thickness 0.15mm(6mil) 0.1mm(4mil)
7 Copper Thickness Min. 1/2 OZ, Max. 4 OZ Min. 1/3 OZ, Max. 10 OZ
8 PTH Wall 20um(0.8mil) 25um(1mil)
9 Maximum Board Size 500*600mm(19”*23”) 1100*500mm(43”*19”)
10 Hole Min laser drilling size 4mil 4mil
Max laser drilling size 6mil 6mil
Max aspect ratio for Hole plate 10:1(hole diameter>8mil) 20:1
Max aspect ratio for laser via filling plating 0.9:1(Depth included copper thickness) 1:1(Depth included copper thickness)
Max aspect ratio for mechanical depth-
control drilling board(Blind hole drilling depth/blind hole size)
0.8:1(drilling tool size≥10mil) 1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil)
Min. depth of Mechanical depth-control(back drill) 8mil 8mil
Min gap between hole wall and
conductor (None blind and buried via PCB)
7mil(≤8L),9mil(10-14L),10mil(>14L) 5.5mil(≤8L),6.5mil(10-14L),7mil(>14L)
Min gap between hole wall conductor (Blind and buried via PCB) 8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating) 7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating)
Min gab between hole wall conductor(Laser blind hole buried via PCB) 7mil(1+N+1);8mil(1+1+N+1+1 or 2+N+2) 7mil(1+N+1);8mil(1+1+N+1+1 or 2+N+2)
Min space between laser holes and conductor 6mil 5mil
Min space between hole walls in different net 10mil 10mil
Min space between hole walls in the same net 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB)
Min space bwteen NPTH hole walls 8mil 8mil
Hole location tolerance ±2mil ±2mil
NPTH tolerance ±2mil ±2mil
Pressfit holes tolerance ±2mil ±2mil
Countersink depth tolerance ±6mil ±6mil
Countersink hole size tolerance ±6mil ±6mil
11 Pad(ring) Min Pad size for laser drillings 10mil(for 4mil laser via),11mil(for 5mil laser via) 10mil(for 4mil laser via),11mil(for 5mil laser via)
Min Pad size for mechanical drillings 16mil(8mil drillings) 16mil(8mil drillings)
Min BGA pad size HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold) HASL:10mil, LF HASL:12mil, other surface technics are 7mi
Pad size tolerance(BGA) ±1.5mil(pad size≤10mil);±15%(pad size>10mil) ±1.2mil(pad size≤12mil);±10%(pad size≥12mil)
12 Width/Space Internal Layer 1/2OZ:3/3mil 1/2OZ:3/3mil
1OZ: 3/4mil 1OZ: 3/4mil
2OZ: 4/5.5mil 2OZ: 4/5mil
3OZ: 5/8mil 3OZ: 5/8mil
4OZ: 6/11mil 4OZ: 6/11mil
5OZ: 7/14mil 5OZ: 7/13.5mil
6OZ: 8/16mil 6OZ: 8/15mil
7OZ: 9/19mil 7OZ: 9/18mil
8OZ: 10/22mil 8OZ: 10/21mil
9OZ: 11/25mil 9OZ: 11/24mil
10OZ: 12/28mil 10OZ: 12/27mil
External Layer 1/3OZ:3.5/4mil 1/3OZ:3/3mil
1/2OZ:3.9/4.5mil 1/2OZ:3.5/3.5mil
1OZ: 4.8/5mil 1OZ: 4.5/5mil
1.43OZ(positive):4.5/7 1.43OZ(positive):4.5/6
1.43OZ(negative ):5/8 1.43OZ(negative ):5/7
2OZ: 6/8mil 2OZ: 6/7mil
3OZ: 6/12mil 3OZ: 6/10mil
4OZ: 7.5/15mil 4OZ: 7.5/13mil
5OZ: 9/18mil 5OZ: 9/16mil
6OZ: 10/21mil 6OZ: 10/19mil
7OZ: 11/25mil 7OZ: 11/22mil
8OZ: 12/29mil 8OZ: 12/26mil
9OZ: 13/33mil 9OZ: 13/30mil
10OZ: 14/38mil 10OZ: 14/35mil
13 Dimension Tolerance Hole Position 0.08 ( 3 mils)
Conductor Width(W) 20% Deviation of Master
1mil Deviation of Master
Outline Dimension 0.15 mm ( 6 mils) 0.10 mm ( 4 mils)
Conductors & Outline
( C – O )
0.15 mm ( 6 mils) 0.13 mm ( 5 mils)
Warp and Twist 0.75% 0.50%
14 Solder Mask Max drilling tool size for via filled with Soldermask (single side) 35.4mil 35.4mil
Soldermask color Green, Black, Blue, Red, White, Yellow,Purple matte/glossy
Silkscreen color White, Black,Blue,Yellow
Max hole size for via filled with Blue glue aluminium 197mil 197mil
Finish hole size for via filled with resin  4-25.4mil  4-25.4mil
Max aspect ratio for via filled with resin board 8:1 12:1
Min width of soldermask bridge Base copper≤0.5 oz、Immersion Tin: 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area)
Base copper≤0.5 oz、Finish treatment not Immersion Tin : 5.5 mil(Black,extremity 5mil), 4mil(Other
color,extremity 3.5mil) , 8mil( on copper area
Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area)
Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area)
Base copper 2 oz-4 oz: 6mil, 8mil( on copper area)
15 Surface Treatment Lead free Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge
Leaded Leaded HASL
Aspect ratio 10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP)
Max finished size HASL Lead 22″*39″;HASL Lead free 22″*24″;Flash gold 24″*24″;Hard gold 24″*28″;ENIG 21″*27″;Flash gold(electroplated gold) 21″*48″;Immersion Tin 16″*21″;Immersion silver 16″*18″;OSP 24″*40″;
Min finished size HASL Lead 5″*6″;HASL Lead free 10″*10″;Flash gold 12″*16″;Hard gold 3″*3″;Flash gold(electroplated gold) 8″*10″;Immersion Tin 2″*4″;Immersion silver 2″*4″;OSP 2″*2″;
PCB thickness HASL Lead 0.6-4.0mm;HASL Lead free 0.6-4.0mm;Flash gold 1.0-3.2mm;Hard gold 0.1-5.0mm;ENIG 0.2-7.0mm;Flash gold(electroplated gold) 0.15-5.0mm;Immersion Tin 0.4-5.0mm;Immersion silver 0.4-5.0mm;OSP 0.2-6.0mm
Max high to gold finger 1.5inch
Min space between gold fingers 6mil
Min block space to gold fingers 7.5mil
16 V-Cutting Panel Size 500mm X 622 mm  ( max. ) 500mm X 800 mm ( max. )
Board Thickness 0.50 mm (20mil) min. 0.30 mm (12mil) min.
Remain Thickness 1/3 board thickness 0.40 +/-0.10mm( 16+/-4 mil )
Tolerance ±0.13 mm(5mil) ±0.1 mm(4mil)
Groove Width 0.50 mm (20mil) max. 0.38 mm (15mil) max.
Groove to Groove 20 mm (787mil) min. 10 mm (394mil) min.
Groove to Trace 0.45 mm(18mil) min. 0.38 mm(15mil) min.
17 Slot Slot size tol.L≥2W PTH Slot: L:+/-0.13(5mil) W:+/-0.08(3mil) PTH Slot: L:+/-0.10(4mil) W:+/-0.05(2mil)
NPTH slot(mm) L+/-0.10 (4mil) W:+/-0.05(2mil) NPTH slot(mm) L:+/-0.08 (3mil) W:+/-0.05(2mil)
18 Min Spacing from hole edge to hole edge 0.30-1.60 (Hole Diameter) 0.15mm(6mil) 0.10mm(4mil)
1.61-6.50 (Hole Diameter) 0.15mm(6mil) 0.13mm(5mil)
19 Min spacing between hole edge to circuitry pattern PTH hole: 0.20mm(8mil) PTH hole: 0.13mm(5mil)
NPTH hole: 0.18mm(7mil) NPTH hole: 0.10mm(4mil)
20 Image transfer Registration tol Circuit pattern vs.index hole 0.10(4mil) 0.08(3mil)
Circuit pattern vs.2nd drill hole 0.15(6mil) 0.10(4mil)
21 Registration tolerance of front/back image 0.075mm(3mil) 0.05mm(2mil)
22 Multilayers Layer-layer misregistration 4layers: 0.15mm(6mil)max. 4layers: 0.10mm(4mil) max.
6layers: 0.20mm(8mil)max. 6layers: 0.13mm(5mil) max.
8layers: 0.25mm(10mil)max. 8layers: 0.15mm(6mil) max.
Min. Spacing from Hole Edge to Innerlayer Pattern 0.225mm(9mil) 0.15mm(6mil)
Min.Spacing from Outline to Innerlayer Pattern 0.38mm(15mil) 0.225mm(9mil)
Min. board thickness 4layers:0.30mm(12mil) 4layers:0.20mm(8mil)
6layers:0.60mm(24mil) 6layers:0.50mm(20mil)
8layers:1.0mm(40mil) 8layers:0.75mm(30mil)
Board thickness tolerance 4layers:+/-0.13mm(5mil) 4layers:+/-0.10mm(4mil)
6layers:+/-0.15mm(6mil) 6layers:+/-0.13mm(5mil)
8-12 layers:+/-0.20mm (8mil) 8-12 layers:+/-0.15mm (6mil)
23 Insulation Resistance 10KΩ~20MΩ(typical:5MΩ)
24 Conductivity <50Ω(typical:25Ω)
25 Test voltage 250V
26 Impedance control ±5ohm(<50ohm), ±10%(≥50ohm)

PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.

1. DHL

DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.


2. UPS

UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.


3. TNT

TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.


4. FedEx

FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.


5. Air, Sea/Air, and Sea

If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.

Note: if you need others, please contact your sales representative for shipping solutions.

You can use the following payment methods:

Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.

Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.

Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.

Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.

Quick Quote
  • “This is the best PCB company I have ever used, out of all the ones I have tested online. Just one month ago, I purchased PCB sheets and blank PCBs from this site. The team as a whole and the staff in particular exceeded my expectations. I enjoyed the performance and the easy order processing process. I’ve been treated so well by them. I would never consider moving my business elsewhere. They are Shenzhen’s top PCB producer.”

    Jussi Estenson, Strategic Sourcing Manager from Örebro, Sweden
  • “Excellent PCBTok. The service staff and sales assistants were very friendly and open while also clearly outlining the task and associated charges. They take pride in making customers happy and deliver things on schedule, avoiding delays like other businesses in my nation, which is regrettable. They took care of my minor order quickly and professionally right away. I’ll be back since I can’t express my gratitude to them enough! Next, I’ll place more orders and larger PCB orders.”

    Tuomo Peltola, Buying Director, from Linz, Austria
  • “This business has a lot of potential. Excellent customer service was provided by PCBTok, who went above and above to make the experience wonderful. I called them by accident after conducting a Google search, chatted with salespeople, and requested an extremely quick price. After a few days, my item was delivered, and I received wonderful service. I’ll be back here the following year to place my PCB orders.”

    Jens Mathieson, Supply Chain Supervisor from Stavanger, Norway
SSD Versus Hard Disk

Below is a description of the primary differences between SSD and Hard Disk or Hard Drive:

  • PCBs make up both products, but Hard Disk PCBs have a lower layer count
  • Using SSDs speeds up the performance of CPUs and laptops
  • Customers like the quiet operation of SSDs compared to Hard Disks
  • There is more storage space and memory with SSDs
  • With its popularity, SSDs are now almost as cheap as HDDs
  • SSDs are lightweight and can fit smaller devices
How to Replace Hard Disk with SSD

Here are the simplified steps of doing it:

  • Make sure your laptop or computer can be modified before making any changes; some laptops cannot be modified in this parameter.
  • Back-up the drive you will be replacing; clone the HDD after removing clutter programs
  • Remove the old drive
  • Place the SSD on the slot or use the appropriate adapter
  • Physically secure the device, this is usually accomplished using screws
  • Boot the SSD and make sure your Operating System recognizes the SSD
Send Your Inquiry Today
Quick Quote
Update cookies preferences
Scroll to Top