Change Language
Your Creditable TG PCB Supplier
PCBTok’s PCBs are thoroughly tested throughout the manufacturing process to eliminate errors before they are shipped. This is to ensure that they are flawless. All of our PCBs deliver exceptional performance.
In addition, our TG PCB comes with comprehensive after-sales PCB support.
We guarantee a 100% inspection (AOI and E-Test).
We have an abundant supply of raw materials, so don’t worry about a shortage.
We Bring You Tg PCB Excellence
Our primary goal at PCBTok is to provide you with the ideal PCB for your requirements for any kind of Glass Transition or Tg rate.
We make it a point to ensure that our products meet all of the standard PCB guidelines.
Serving you with the best customer service possible is an essential component of this.
We provide you with a satisfying PCB product dedicated to any range of Thermal Glass Transition temperature requirement.
Since our company’s inception (2008), we have provided assistance and support.
We’ve got thousands of satisfied customers all over the world.
TG PCB By Tg Range
This type of PCB from PCBTok ensures that the PCB can survive in moderate-use environments. It will fail in high temperatures.
The medium range type is measured at 150 degrees Celsius. This PCB is sometimes required by customers, it’s reasonably priced.
We’ve had customers request this type of PCB for aerospace and military applications. Can also be used as a telecommunications device.
In the normal range of PCB types, the PCB of FR4 material has a transition glass temperature of 130 degrees Celsius.
Degree 150 Celsius is the midpoint of thermal resistance measurement. Includes these materials: IT158, S1000H, and TU-662.
TG PCB By Material (6)
-
In general, FR4 PCB is excellent, to be applied to mass PCB roll-out. Materials of this type include KB6150, KB6160, and KB-6160A.
-
Rogers PCB offers a wide range of materials, including laminates and prepregs with high Tg allowance (e.g., RO4835, RO4350b, RO4360).
-
Taconic PCBs are another option for high temperature boards. These are the ceramic and PTFE materials they have on hand.
-
For superior but affordable heat resistance, you can also turn to Arlon, another leading PCB material provider.
-
Nanya provides PCBs that are mostly standard Tg types. It’s best if the end-device requires standard electronic wiring.
TG PCB By Feature (5)
-
Our Rigid PCBs with the proper Tg are subjected to proper PCB routing, layering, and stack-up. We also make Double-layer and Single-layer PCBs.
-
Our Multilayer PCB is commonly used in wireless devices. Analog device PCBs are also manufactured, and some have mixed interface usage.
-
Flex PCBs make use of a material known as Polyimide. It can be used for multilayer Flex PCBs and is also known as or polyester adhesive.
-
A Rigid-Flex PCB’s Rigid and Flex components can be made separately, some materials are suitable to use, but make sure they have the matching Tg grade.
-
The HDI PCB is almost certainly a High Tg type of board. You can site power supply, satellite, and radar usages for HDI applications. These are just some examples.
Operational Possibilities Abound
PCBTok’s PCBs are all designed to give you added strength and quality, whatever temperature tolerance it needs to endure.
Aside from making the actual circuit boards themselves, we also provide PCBA service.
When we do PCBA, the parts-to-board adhering process is done properly to ensure the highest level of performance.
When you mount IC Substrate, ICs, Multichips, DiP, Dpak, and others, we follow the requirements as a standard practice.
For more information, please contact us.
Constructing TG PCB Professionally
By providing them with high-quality PCBs and exceptional customer service—
This is how we get new clients to get onboard.
PCBTok has always been concerned with your PCB concepts and designs,
So, we’re keen to listen to your ideas about it.
We promise to give you a collated gathering of all of the resources you might require for your PCB needs, for just TG use, or any other purpose.
Let’s have a conversation, so we can being professionally handling your orders for TG PCB from now on.
Multiple Applications for TG PCB
Our TG PCB is popular among customers who want design and application freedom.
It is excellent due to its versatility and durability.
The majority of these are used in industries like manufacturing, energy production, consumer products, etc.
Some are also applicable for consumer electronics (these are Quick-Turn PCBs).
We have always believed that our customers’ trust in our products serves as our #1 quality.
As a result, if you want additional info, you can always contact us.
Professional Assessment Boards' TG Needs
All types of PCBs go through a somewhat similar manufacturing process.
The PCBs categorized according to Tg range are no exception.
PCBTok, uses the most advanced and up-to-date production method to create premium and superb PCBs for you.
Just send in a Gerber file, and if you don’t already know the specific Tg you need, we can help.
PCB design/development, and final production are the basic steps we do to produce your PCB.
So, you see, now is the time to get your order going.
TG PCB Fabrication
In PCB, we understand what TG means. Our company manufactures parts that are superior in terms of Tg grading.
TG or Tg is in this temperature range that the PCB, fiberglass, or other material will become unstructured.
Before you send your PCB to production, you must first determine the TG of the PCB substrate.
Knowing this ensures that you use the proper material, because if your PCB will be exposed to high temperatures, you will need a higher Tg board.
A miscalculation in Tg will cost you the functionality of your PCB if you do not use the appropriate Tg grade for the PCB material.
The PCB can stand for a short time at the specified temperature (e.g., 130 degrees Celsius) before becoming rubbery.
You don’t want your PCB to be at this temperature for an extended period of time as a precautionary step.
So, if your PCB must be constantly operational, you must compensate with the corresponding Tg grade.
OEM & ODM TG PCB Applications
The application of any Tg-specific PCB on medical devices will be determined by the type of device it will be designated in; some are ultra-small, even miniscule in size.
Any PCB used in commercial and/or industrial applications must first consider whether it will be used continuously and in what capacity.
Consumer electronics is a popular application for PCBs; any Tg-range is applicable here, as there is a wide variety of consumer gadgets.
Cameras and audiovisual equipment are examples of consumer product applications. Almost all of them, such as Camera PCB and DVR PCB, are available in a dedicated line for entertainment use.
Automotive usage of any Tg-specific PCB will depend on what part of the car it will be designated in.
TG PCB Production Details As Following Up
- Production Facility
- PCB Capabilities
- Shipping Method
- Payment Methods
- Send Us Inquiry
| NO | Item | Technical Specification | ||||||
| Standard | Advanced | |||||||
| 1 | Layer Count | 1-20 layers | 22-40 layer | |||||
| 2 | Base Material | KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) | ||||||
| 3 | PCB Type | Rigid PCB/FPC/Flex-Rigid | Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. | |||||
| 4 | Lamination type | Blind&buried via type | Mechanical blind&burried vias with less than 3 times laminating | Mechanical blind&burried vias with less than 2 times laminating | ||||
| HDI PCB | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | ||||||
| 5 | Finished Board Thickness | 0.2-3.2mm | 3.4-7mm | |||||
| 6 | Minimum Core Thickness | 0.15mm(6mil) | 0.1mm(4mil) | |||||
| 7 | Copper Thickness | Min. 1/2 OZ, Max. 4 OZ | Min. 1/3 OZ, Max. 10 OZ | |||||
| 8 | PTH Wall | 20um(0.8mil) | 25um(1mil) | |||||
| 9 | Maximum Board Size | 500*600mm(19”*23”) | 1100*500mm(43”*19”) | |||||
| 10 | Hole | Min laser drilling size | 4mil | 4mil | ||||
| Max laser drilling size | 6mil | 6mil | ||||||
| Max aspect ratio for Hole plate | 10:1（hole diameter＞8mil） | 20:1 | ||||||
| Max aspect ratio for laser via filling plating | 0.9:1(Depth included copper thickness) | 1:1(Depth included copper thickness) | ||||||
| Max aspect ratio for mechanical depth- control drilling board(Blind hole drilling depth/blind hole size) |
0.8:1(drilling tool size≥10mil) | 1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil) | ||||||
| Min. depth of Mechanical depth-control(back drill) | 8mil | 8mil | ||||||
| Min gap between hole wall and conductor (None blind and buried via PCB) |
7mil(≤8L),9mil(10-14L),10mil(＞14L) | 5.5mil(≤8L),6.5mil(10-14L),7mil(＞14L) | ||||||
| Min gap between hole wall conductor (Blind and buried via PCB) | 8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating) | 7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating) | ||||||
| Min gab between hole wall conductor(Laser blind hole buried via PCB) | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | ||||||
| Min space between laser holes and conductor | 6mil | 5mil | ||||||
| Min space between hole walls in different net | 10mil | 10mil | ||||||
| Min space between hole walls in the same net | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | ||||||
| Min space bwteen NPTH hole walls | 8mil | 8mil | ||||||
| Hole location tolerance | ±2mil | ±2mil | ||||||
| NPTH tolerance | ±2mil | ±2mil | ||||||
| Pressfit holes tolerance | ±2mil | ±2mil | ||||||
| Countersink depth tolerance | ±6mil | ±6mil | ||||||
| Countersink hole size tolerance | ±6mil | ±6mil | ||||||
| 11 | Pad(ring) | Min Pad size for laser drillings | 10mil(for 4mil laser via),11mil(for 5mil laser via) | 10mil(for 4mil laser via),11mil(for 5mil laser via) | ||||
| Min Pad size for mechanical drillings | 16mil(8mil drillings) | 16mil(8mil drillings) | ||||||
| Min BGA pad size | HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold) | HASL:10mil, LF HASL:12mil, other surface technics are 7mi | ||||||
| Pad size tolerance(BGA) | ±1.5mil(pad size≤10mil);±15%(pad size>10mil) | ±1.2mil(pad size≤12mil);±10%(pad size≥12mil) | ||||||
| 12 | Width/Space | Internal Layer | 1/2OZ：3/3mil | 1/2OZ：3/3mil | ||||
| 1OZ: 3/4mil | 1OZ: 3/4mil | |||||||
| 2OZ: 4/5.5mil | 2OZ: 4/5mil | |||||||
| 3OZ: 5/8mil | 3OZ: 5/8mil | |||||||
| 4OZ: 6/11mil | 4OZ: 6/11mil | |||||||
| 5OZ: 7/14mil | 5OZ: 7/13.5mil | |||||||
| 6OZ: 8/16mil | 6OZ: 8/15mil | |||||||
| 7OZ: 9/19mil | 7OZ: 9/18mil | |||||||
| 8OZ: 10/22mil | 8OZ: 10/21mil | |||||||
| 9OZ: 11/25mil | 9OZ: 11/24mil | |||||||
| 10OZ: 12/28mil | 10OZ: 12/27mil | |||||||
| External Layer | 1/3OZ：3.5/4mil | 1/3OZ：3/3mil | ||||||
| 1/2OZ：3.9/4.5mil | 1/2OZ：3.5/3.5mil | |||||||
| 1OZ: 4.8/5mil | 1OZ: 4.5/5mil | |||||||
| 1.43OZ（positive）:4.5/7 | 1.43OZ（positive）:4.5/6 | |||||||
| 1.43OZ（negative ）:5/8 | 1.43OZ（negative ）:5/7 | |||||||
| 2OZ: 6/8mil | 2OZ: 6/7mil | |||||||
| 3OZ: 6/12mil | 3OZ: 6/10mil | |||||||
| 4OZ: 7.5/15mil | 4OZ: 7.5/13mil | |||||||
| 5OZ: 9/18mil | 5OZ: 9/16mil | |||||||
| 6OZ: 10/21mil | 6OZ: 10/19mil | |||||||
| 7OZ: 11/25mil | 7OZ: 11/22mil | |||||||
| 8OZ: 12/29mil | 8OZ: 12/26mil | |||||||
| 9OZ: 13/33mil | 9OZ: 13/30mil | |||||||
| 10OZ: 14/38mil | 10OZ: 14/35mil | |||||||
| 13 | Dimension Tolerance | Hole Position | 0.08 ( 3 mils) | |||||
| Conductor Width(W) | 20% Deviation of Master A/W |
1mil Deviation of Master A/W |
||||||
| Outline Dimension | 0.15 mm ( 6 mils) | 0.10 mm ( 4 mils) | ||||||
| Conductors & Outline ( C – O ) |
0.15 mm ( 6 mils) | 0.13 mm ( 5 mils) | ||||||
| Warp and Twist | 0.75% | 0.50% | ||||||
| 14 | Solder Mask | Max drilling tool size for via filled with Soldermask (single side) | 35.4mil | 35.4mil | ||||
| Soldermask color | Green, Black, Blue, Red, White, Yellow,Purple matte/glossy | |||||||
| Silkscreen color | White, Black,Blue,Yellow | |||||||
| Max hole size for via filled with Blue glue aluminium | 197mil | 197mil | ||||||
| Finish hole size for via filled with resin | 4-25.4mil | 4-25.4mil | ||||||
| Max aspect ratio for via filled with resin board | 8:1 | 12:1 | ||||||
| Min width of soldermask bridge | Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area) | |||||||
| Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other color,extremity 3.5mil) , 8mil( on copper area |
||||||||
| Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area) | ||||||||
| Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area) | ||||||||
| Base copper 2 oz-4 oz: 6mil, 8mil( on copper area) | ||||||||
| 15 | Surface Treatment | Lead free | Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge | |||||
| Leaded | Leaded HASL | |||||||
| Aspect ratio | 10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) | |||||||
| Max finished size | HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″； | |||||||
| Min finished size | HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″； | |||||||
| PCB thickness | HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm | |||||||
| Max high to gold finger | 1.5inch | |||||||
| Min space between gold fingers | 6mil | |||||||
| Min block space to gold fingers | 7.5mil | |||||||
| 16 | V-Cutting | Panel Size | 500mm X 622 mm ( max. ) | 500mm X 800 mm ( max. ) | ||||
| Board Thickness | 0.50 mm (20mil) min. | 0.30 mm (12mil) min. | ||||||
| Remain Thickness | 1/3 board thickness | 0.40 +/-0.10mm( 16+/-4 mil ) | ||||||
| Tolerance | ±0.13 mm(5mil) | ±0.1 mm(4mil) | ||||||
| Groove Width | 0.50 mm (20mil) max. | 0.38 mm (15mil) max. | ||||||
| Groove to Groove | 20 mm (787mil) min. | 10 mm (394mil) min. | ||||||
| Groove to Trace | 0.45 mm(18mil) min. | 0.38 mm(15mil) min. | ||||||
| 17 | Slot | Slot size tol.L≥2W | PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil) | PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil) | ||||
| NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil) | NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil) | |||||||
| 18 | Min Spacing from hole edge to hole edge | 0.30-1.60 (Hole Diameter) | 0.15mm(6mil) | 0.10mm(4mil) | ||||
| 1.61-6.50 (Hole Diameter) | 0.15mm(6mil) | 0.13mm(5mil) | ||||||
| 19 | Min spacing between hole edge to circuitry pattern | PTH hole: 0.20mm(8mil) | PTH hole: 0.13mm(5mil) | |||||
| NPTH hole: 0.18mm(7mil) | NPTH hole: 0.10mm(4mil) | |||||||
| 20 | Image transfer Registration tol | Circuit pattern vs.index hole | 0.10(4mil) | 0.08(3mil) | ||||
| Circuit pattern vs.2nd drill hole | 0.15(6mil) | 0.10(4mil) | ||||||
| 21 | Registration tolerance of front/back image | 0.075mm(3mil) | 0.05mm(2mil) | |||||
| 22 | Multilayers | Layer-layer misregistration | 4layers: | 0.15mm(6mil)max. | 4layers: | 0.10mm(4mil) max. | ||
| 6layers: | 0.20mm(8mil)max. | 6layers: | 0.13mm(5mil) max. | |||||
| 8layers: | 0.25mm(10mil)max. | 8layers: | 0.15mm(6mil) max. | |||||
| Min. Spacing from Hole Edge to Innerlayer Pattern | 0.225mm(9mil) | 0.15mm(6mil) | ||||||
| Min.Spacing from Outline to Innerlayer Pattern | 0.38mm(15mil) | 0.225mm(9mil) | ||||||
| Min. board thickness | 4layers:0.30mm(12mil) | 4layers:0.20mm(8mil) | ||||||
| 6layers:0.60mm(24mil) | 6layers:0.50mm(20mil) | |||||||
| 8layers:1.0mm(40mil) | 8layers:0.75mm(30mil) | |||||||
| Board thickness tolerance | 4layers:+/-0.13mm(5mil) | 4layers:+/-0.10mm(4mil) | ||||||
| 6layers:+/-0.15mm(6mil) | 6layers:+/-0.13mm(5mil) | |||||||
| 8-12 layers:+/-0.20mm (8mil) | 8-12 layers:+/-0.15mm (6mil) | |||||||
| 23 | Insulation Resistance | 10KΩ~20MΩ(typical:5MΩ) | ||||||
| 24 | Conductivity | <50Ω(typical:25Ω) | ||||||
| 25 | Test voltage | 250V | ||||||
| 26 | Impedance control | ±5ohm(＜50ohm), ±10%(≥50ohm) | ||||||
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
1. DHL
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
2. UPS
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
3. TNT
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
4. FedEx
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
