Through Hole PCB Assembly

PCBTok provides through-hole PCB assembly for prototypes, small batches, and large production runs. We support manual insertion, wave soldering, and selective soldering for connectors, relays, transformers, and other through-hole components.

With 300,000 traceable in-stock components, we support component sourcing, PCB assembly, and quality inspection for a wide range of electronic products.

✔ Wave, Dual-Wave & Selective Soldering Capabilities
✔ Manual & Automated Component Insertion
✔ Full Turnkey, Partial Turnkey & Consigned Services
✔ Prototype, Low-Volume & High-Volume Production
✔ IPC-A-610 Class 2/3 Assembly & Quality Inspection

Get Our Best Quotation
Quick Quote

What is Through Hole PCB Assembly?

Through-hole PCB assembly (THT) is the process of inserting component leads through pre-drilled holes in a printed circuit board and soldering them to pads on the opposite side. This method creates strong mechanical connections for components that need reliable support.

THT assembly is widely used in power supplies, industrial controls, automotive electronics, and other equipment that requires durable components. Its main advantages are strong mechanical connections, high reliability, and better resistance to heat, vibration, and physical stress. These benefits make it suitable for connectors, relays, transformers, and other components that need secure mounting and long-term performance.

Read More

Through-Hole PCB Assembly Types

Automated Through-Hole Assembly

Automated through-hole insertion uses equipment to place compatible axial and radial components into PCB holes. It supports consistent insertion and efficient production for suitable high-volume designs.

Manual Through-Hole Assembly

Manual through-hole insertion allows operators to place components that are unsuitable for automated insertion. It is commonly used for prototypes, small batches, large connectors, transformers, and irregularly shaped components.

Wave & Dual-Wave Soldering

Wave soldering passes the underside of a PCB over molten solder to form through-hole solder joints. Dual-wave systems use different solder waves to improve solder coverage for suitable board layouts and production requirements.

Selective Soldering

Selective soldering applies molten solder to specific areas of the PCB. It suits mixed-technology boards and helps control heat around nearby components that should not be exposed to the soldering process.

Pin-in-Paste (Intrusive Reflow)

Pin-in-paste assembly applies solder paste to through-holes before component placement. The PCB then passes through a reflow oven to form solder joints. This method can combine through-hole and surface-mount assembly in one production process when the components and design are suitable.

Through-Hole PCB Assembly Sourcing Options (3)

PCBTok Service Advantages for Through Hole PCB Assembly

Wave, Dual-Wave & Selective Soldering
Wave, Dual-Wave & Selective Soldering

PCBTok offers wave, dual-wave, and selective soldering for reliable through-hole component assembly. We select the soldering method based on your PCB design, component layout, and production needs.

Component Sourcing and BOM Verification
Component Sourcing and BOM Verification

We check your BOM and component details before assembly. Our sourcing options cover axial and radial components, SIP and DIP packages, connectors, relays, transformers, and heavy components. We can also suggest suitable alternatives when needed and approved.

Heavy Component Assembly & Mechanical Support
Heavy Component Assembly & Mechanical Support

PCBTok handles heavy through-hole components that require secure mounting. We assess component placement, lead spacing, and mechanical support to help prevent stress on solder joints. We also support custom fixtures and mounting methods when needed.

Solder Joint Inspection & Quality Control
Solder Joint Inspection & Quality Control

PCBTok inspects through-hole solder joints for solder fill, wetting, bridging, and visible defects according to applicable IPC-A-610 Class 2 or Class 3 criteria. We also provide visual inspection, first article inspection, and customer-specified electrical or functional testing to verify assembly quality.

Through-Hole PCB Assembly Process

PCBTok follows a controlled through-hole PCB assembly process, from engineering review to final packaging. During Engineering Review & BOM Verification, we check your PCB design, Gerber files, bill of materials (BOM), and assembly requirements to confirm component specifications and identify potential issues before production.

During PCB & Component Preparation, we prepare the boards and components for assembly. We then perform Through-Hole Component Insertion by inserting component leads through the drilled PCB holes manually or with automated equipment, depending on your design and production volume.

For Through-Hole Soldering, we use wave, dual-wave, selective, or manual soldering to create reliable electrical and mechanical connections. During Post-Soldering Inspection & Finishing, we check component placement and solder joints for defects, trim excess leads, and complete the required finishing steps.

Finally, we perform final visual inspection and customer-specified electrical or functional testing before shipment. Once the boards pass inspection, we package them for shipment.

Through-Hole PCB Assembly Process
Through-Hole PCB Assembly Challenges & Solutions

Through-Hole PCB Assembly Challenges & Solutions

PCBTok addresses common through-hole PCB assembly challenges to improve component reliability, soldering quality, and production consistency.

  1. Large & Heavy Component Mounting – Large components can place stress on solder joints and PCB holes. PCBTok checks component placement and mounting requirements to support secure connections.
  2. Component Sourcing & BOM Accuracy – Through-hole PCB assembly can be delayed by incorrect parts or supply shortages. PCBTok verifies your BOM, checks component availability, and suggests suitable alternatives when needed and approved.
  3. Solder Fill & Hole-Wall Wetting – Poor solder fill or wetting can weaken electrical and mechanical connections. PCBTok controls soldering parameters to support proper hole filling and reliable solder joints.
  4. Heat-Sensitive & Mixed-Technology Components – Excessive heat can damage sensitive components, especially on boards that combine SMT and through-hole parts. PCBTok uses selective or manual soldering where suitable to limit heat exposure around sensitive components.

Need through-hole PCB assembly for your project? Send your PCB files, BOM, and assembly requirements to us to request a quote.

PCBTok Through Hole PCB Assembly Case Studies

Washing Machine Control PCB

The customer needed a through-hole PCB assembly for a washing machine control system. The design included relays, connectors, DIP components, capacitors, and power control circuits. The main challenges involved secure mounting of larger components and consistent solder joints for an appliance exposed to vibration and temperature changes. PCBTok used selective and manual soldering for the specified components, followed by visual inspection and customer-required electrical testing.

Technical Specifications

  • PCB: 2-layer rigid PCB
  • Material: FR-4
  • Board Thickness: 1.6 mm
  • Copper Weight: 2 oz
  • Surface Finish: Lead-free HASL
  • Through-Hole Components: Relays, DIP ICs, radial capacitors, pin headers, and wire connectors
  • Soldering Process: Selective soldering and manual soldering
  • Solder Type: Lead-free, no-clean
  • Inspection: Visual inspection, AOI where applicable, and first article inspection
  • Testing: Continuity testing and customer-specified functional testing
  • Additional Services: BOM verification, component sourcing, and conformal coating where required
LED Lighting Power Supply PCB

The customer required a through-hole PCB assembly for an LED lighting power supply used in commercial and residential lighting systems. The board included transformers, electrolytic capacitors, power resistors, diodes, and input and output connectors. The main manufacturing challenge was achieving consistent solder fill around components and copper areas with different thermal masses. PCBTok used dual-wave soldering for compatible components and manual soldering where required, followed by visual inspection and specified electrical testing.

Technical Specifications

  • PCB: 2-layer rigid PCB
  • Material: FR-4
  • Board Thickness: 1.6 mm
  • Copper Weight: 2 oz
  • Surface Finish: HASL
  • Through-Hole Components: Transformers, electrolytic capacitors, power resistors, diodes, and connectors
  • Soldering Process: Dual-wave soldering and manual soldering
  • Solder Type: Lead-free, RoHS-compliant
  • Inspection: High-magnification visual inspection and AOI where applicable
  • Testing: Electrical continuity, polarity checks, and customer-specified power testing
  • Additional Services: DFM review, BOM verification, component sourcing, and conformal coating

OEM & ODM Through Hole PCB Assembly Applications

Prototype PCB for Consumer Electronics

Through-hole PCB assembly for home appliances, power supplies, audio equipment, and other consumer products that use connectors, relays, and larger components.

medical devices

Through-hole PCB assembly for patient monitors, diagnostic equipment, medical instruments, and power supply units that require reliable electrical connections.

Automotive Electronics

Through-hole PCB assembly for vehicle control systems, power distribution units, relays, and electronic modules that need durable component connections.

Aerospace & Industrial Controls

Through-hole PCB assembly for communication equipment, navigation systems, and support electronics that require secure component mounting and reliable connections.

Telecommunications

Through-hole PCB assembly for network switches, communication equipment, power supply units, and signal control boards that use connectors and other through-hole components.

tht banner
Start Your Through-Hole PCB Assembly Project

Upload your Gerber files, BOM, and assembly files for a free engineering review and through-hole PCB assembly quote.

Prototype PCB Production Details As Following Up

CategoryTHT Capabilities
Order Quantity1 piece or more, from prototypes to mass production
Soldering MethodsManual, dual-wave, and selective soldering
Component TypesAxial, radial, SIP, DIP, connectors, relays, transformers, and heavy components
PCB TypesRigid, flex, rigid-flex, high-TG, and heavy-copper PCBs (10 oz or more)
Solder TypesLead-free (RoHS), tin-lead (where permitted), water-soluble, and no-clean
Mechanical SupportComponent staking and custom heat sink mounting
Additional ServicesConformal coating and potting
Inspection MethodsHigh-magnification visual inspection, AOI, X-ray, and first article inspection (FAI)
Quality StandardsISO 13485, ISO 9001:2015, IPC-A-610 Class 3, and RoHS compliance

PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.

1. DHL

DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.

DHL

2. UPS

UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.

UPS

3. TNT

TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.

TNT

4. FedEx

FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.

FedEx

5. Air, Sea/Air, and Sea

If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.

Note: if you need others, please contact your sales representative for shipping solutions.

You can use the following payment methods:

Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.

Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.

Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.

Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.

Quick Quote
  • “Managing high thermal mass on an 8-layer, 4 oz copper board is no easy feat. PCBTok handled our heavy-duty BMS boards with incredible skill. Their multi-zone preheating and wave soldering process eliminated cold joints entirely, delivering exceptional quality on time.”

    Jiego Perez, Director of Energy Systems, Australia
  • “Balancing delicate SMT high-speed lines with heavy through-hole connectors on a 12-layer hybrid board requires serious expertise. PCBTok’s dual-stage assembly process protected our signal integrity while providing the mechanical strength we needed for our router cages.”

    Hiroshi Tanaka, VP of Network Hardware Engineering, Japan
  • “We needed high-throughput manufacturing for our range controllers without compromising safety or reliability. PCBTok leveraged automated insertion and high-speed wave soldering to deliver cost-effective, high-yield assemblies right on schedule. They’ve been a fantastic partner for our consumer line.”

    Carlos Gomez, Supply Chain & Operations Director, United States

Through Hole PCB Assembly: The Ultimate FAQ Guide

Choosing the right through-hole PCB assembly partner affects your product quality, production cost, and delivery time. A reliable supplier should handle different component types, soldering methods, and production volumes. Before choosing a supplier, review their through-hole assembly capabilities, component sourcing options, design support, inspection methods, testing procedures, and ability to maintain consistent quality across production runs.

What Is the Difference Between Through-Hole and SMT Assembly?

THT assembly is a process where component leads are inserted into PCB holes. SMT assembly directly attaches components into PCB surface.

What Types of Through-Hole Components Can PCBTok Assemble?

PCBTok assembles connectors, resistors, capacitors, diodes, relays, transformers, DIP packages, and other through-hole components.

What Through-Hole Soldering Methods Does PCBTok Offer?

PCBTok offers wave, dual-wave, selective, and manual soldering based on your PCB design and production needs.

Do You Offer Both Leaded and RoHS-Compliant Through-Hole Soldering?

Yes. PCBTok supports leaded and lead-free soldering based on your project requirements and applicable RoHS requirements.

How Do You Ensure Through-Hole Soldering Quality?

We inspect solder joints for proper fill, wetting, bridging, and visible defects. We also provide electrical and functional testing based on your requirements.

Can PCBTok Support Mixed SMT and Through-Hole Assembly?

Yes. PCBTok supports mixed-technology assembly, combining SMT and through-hole components on the same PCB.

Can Through-Hole PCBs Be Repaired?

Yes. Through-hole components are generally easier to replace, but repairs must avoid damaging pads, plated holes, and PCB traces.

What Files Are Needed for a Through-Hole PCB Assembly Quote?

Provide your Gerber files, drill files, bill of materials (BOM), assembly drawing, order quantity, and testing requirements. Include any special soldering or material requirements.

Can PCBTok Handle Prototype and High-Volume Through-Hole Assembly?

Yes. PCBTok supports prototype, low-volume, and high-volume through-hole PCB assembly based on your project requirements.

Send Your Inquiry Today
Quick Quote
Update cookies preferences
Scroll to Top