Change Language
Your Distinctive Waterproof PCB Manufacturer is PCBTok
Due to our commitment to exceeding customer expectations with our capabilities, PCBTok has been recognized as a notable Waterproof PCB manufacturer.
- CAM thoroughly examines each file before manufacturing.
- Without exception, all required inspections are performed (E-Test and AOI).
- We offer full access to professional assistance around-the-clock.
- Our full support is included with your customized Waterproof PCB.
- In our factory, we deploy about 500 professionals.
First-Rate and Superior Waterproof PCB by PCBTok
At PCBTok, we value the views of our consumers; hence, we want them to experience a good encounter with us and a first-rate Waterproof PCB.
Our team of dedicated experts continuously works hard to improve the Waterproof PCB. We are doing this to make sure that it will perform flawlessly.
In addition, we always consider any concepts and thoughts you have in mind; we can perfectly fulfill your PCB specifications and desires.
Experience our premium Waterproof PCB today!
We will do our utmost best to perfect your desired Waterproof PCB quickly but with a hundred percent accuracy for better quality and performance.
Waterproof PCB By Feature
The LED Light Waterproof PCB is one of the most popular uses of this kind of board since most of them are incorporated in industrial applications such as in street lights, which are prone to get wet during rain. Additionally, it is ideal for strip lights that are exposed to water.
The Electronic Toothbrush Waterproof PCB is another common usage of this board since this type of toothbrush has direct contact with water during its use. Hence, it deploys this kind of board.
The GoPro Camera Waterproof PCB is specifically designed and built to be submerged in water to capture the moments that are under the wet surface. It is also one of the most famous uses of this board.
The Smart Watch Waterproof PCB has become more popular due to technological advancement. Some of these devices are built to monitor your health during diving since they can tolerate water.
The Speaker Waterproof PCB is quite similar to the smartwatch. Due to the advancement, many swimmers or divers use an earpiece or earbuds during their time in the water to listen to some music.
The Helmet Bluetooth Intercom Waterproof PCB has gained popularity today since you can listen to songs while driving a motorcycle, even if it’s raining, without damaging the piece.
Waterproof PCB By Methods of Waterproofing (5)
-
The Structural Waterproofing can provide adequate waterproofing to the board. In addition, it is simple to deploy and has minimal risk of PCB damage. However, it can’t always be efficient under particular situations.
-
The Potting Waterproofing drenches a water-resistant compound to the board to apply a protective layer. One advantage is that it offers resistance to shock and outstanding protection against weather conditions.
-
The Dipping Waterproofing submerges the board into a waterproof coating solution. Then, withdraw it after it has been cured. Also, this can be ideal if you plan to perform do-it-yourself (DIY) waterproofing.
-
The Surface Coating Waterproofing can also be an alternative to dipping if you plan to conduct DIY waterproofing in your home. In addition, it is the least expensive method. However, it is not ecologically friendly.
-
The Spray Waterproofing, as its name indicates, the waterproofing solution is applied through an aerosol spray. It is recognized to be the easiest method to use in terms of waterproofing your circuit board.
Waterproof PCB By Surface Treatment (5)
-
The HASL PCB is considered this board’s most valuable type of surface finish. In addition, one of the reasons for it becoming the most popular finish is that it is highly resistant to corrosion and economically friendly.
-
The ENIG PCB is the most recommended finish for this type of board, similar to the HASL one. It is because it offers a flat finish to the board, provides a strong solder connection, and has corrosion resistance.
-
The Immersion Silver PCB offers exceptional flatness to the board. Moreover, it is a reasonably priced finish, given that it is lead-free and halogen-free. However, it can be sensitive to handling and tarnishing.
-
The OSP PCB works pretty well on flat surfaces; it can be reworked, has a simple and easy application process, and is lead-free and halogen-free; thus, it complies with the RoHS regulations, and it is economical.
-
The Carbon Ink PCB is recognized to be a good alternative for the hard gold finish since it is way more robust and reliable compared to other types of finishes. However, it requires proper care and cleaning.
Waterproof PCB Benefits
PCBTok can offer 24h online support for you. When you have any PCB-related questions, please feel free to get in touch.
PCBTok can build your PCB prototypes quickly. We also provide 24 hour production for quick-turn PCBs at our facility.
We often ship goods by international forwarders such as UPS, DHL, and FedEx. If they are urgent, we use priority express service.
PCBTok has passed ISO9001 and 14001, and also has USA and Canada UL certifications. We strictly follow IPC class 2 or class 3 standards for our products.
Factors to Consider in Choosing the Right Conformal Coating for Waterproof PCB
One of the most crucial things in protecting chemicals, moisture, specks of dust, and others in a Waterproof PCB is its conformal coating.
Hence, we want to give you a heads-up on what to look for when selecting one.
- We recommend checking its re-workability.
- It should be able to operate in various temperature conditions.
- It must possess a low toxicity level and at an affordable rate.
- It must be able to shield the board from low to high temperatures.
- It must have a long shelf lifespan.
PCBTok’s Waterproof PCB Materials and Compounds for Waterproofing
There are a lot of materials and compounds deployed during the waterproofing phase of a Waterproof PCB; the following are the common and important ones:
- Epoxy – You can use this in potting and structural waterproofing; it has exceptional adhesion and good temperature resistance.
- Silicone – In comparison with Epoxy, this one possesses outstanding extensibility. However, this isn’t ideal for extreme temperature conditions.
- Urethane – This is ideal for SMT PCB potting since it is extensible, versatile, and has relatively high abrasion resistance.
Simply get in touch with us if you want more information on this.
Advantages of PCBTok’s Waterproof PCB
You can gain the following advantages from PCBTok’s Waterproof PCB:
- Extremely Reliable – This board can tolerate significant amounts of water and dust and has a coating that prevents corrosion and oxidation.
- Functionality – They are known to be highly accurate boards with high transfer rates, making them very functional.
- Lifespan – These boards are anticipated to last longer than conventional boards because they have undergone extensive testing and inspection.
- Applications – Due to their great demand and diverse range of uses, they are currently favored by many.
Grab the Enhanced Waterproof PCB from PCBTok
Choosing PCBTok as your Waterproof PCB manufacturer will never encounter difficulties. We have extensive knowledge and experience in this field; we are fully capable of putting into action your specifications into reality.
Additionally, we have tons of classification choices for your Waterproof PCB that will certainly fit any applications. However, we can also customize one for you.
We are composed of technically competent experts that perform thorough research, designing, planning, layout, and manufacturing of your Waterproof PCB to perfection.
PCBTok complies with several international product certifications to achieve a perfect Waterproof PCB, including ISO9001:2008, RoHS, REACH, ISO9001:2015, ISO 14001:2015, and UL (E477880). Inquire today to get the best deal we have!
Waterproof PCB Fabrication
Since impedance control provides stability that forms in current conduction, it is essential to ensure that it is up to standards.
Generally, an electrical component’s dielectric dimensions and electric permittivity may affect its impedance.
Hence, we want to share with you the things to consider looking out for to attain impedance stability. This includes choosing the most effective materials.
Additionally, you might also want to look out for its temperature control. Also, in terms of the current load of the PCB, we recommend calculating its dielectric thickness.
Please write or call us if you would need a more thorough explanation of these.
To ensure the performance of the Waterproof PCB, we perform all sorts of inspections and tests established by the international guidelines.
However, in this section, we will only share two (2) of them since they are considered the most crucial tests we conduct.
We perform Flying Probe Test, wherein we use these conductive probes to touch the board’s surface. In addition, this can test the wirings, faulty connections, etc.
Then, we have the Automated Optical Inspection (AOI), wherein a machine captures an image of the board; it will compare it to a perfect PCB to check for flaws.
Kindly contact us right away if you have questions about the other tests.
OEM & ODM Waterproof PCB Applications
One of the advantages of deploying a Waterproof PCB in any consumer electronics is its exceptional functionality; hence, they are widely preferred in such usage.
Due to the Waterproof PCB’s capability to tolerate an excessive amount of water and specks of dust, they are integrated into automotive devices wherein these are prevalent.
Most radar systems require a board that can withstand extreme temperature conditions; a Waterproof PCB can perform that without any problems.
Since Waterproof PCBs can operate efficiently even when water pools, they are being deployed in submarines since they are constantly subjected to water.
Another advantage of a Waterproof PCB is its high transfer rates regardless of the weather conditions; thus, they are preferred in wireless communications systems.
Waterproof PCB Production Details As Following Up
- Production Facility
- PCB Capabilities
- Shipping Methods
- Payment Methods
- Send Us Inquiry
| NO | Item | Technical Specification | ||||||
| Standard | Advanced | |||||||
| 1 | Layer Count | 1-20 layers | 22-40 layer | |||||
| 2 | Base Material | KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350、Rogers400、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) | ||||||
| 3 | PCB Type | Rigid PCB/FPC/Flex-Rigid | Backplane、HDI、High multi-layer blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. | |||||
| 4 | Lamination type | Blind&buried via type | Mechanical blind&burried vias with less than 3 times laminating | Mechanical blind&burried vias with less than 2 times laminating | ||||
| HDI PCB | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | 1+n+1,1+1+n+1+1,2+n+2,3+n+3(n buried vias≤0.3mm),Laser blind via can be filling plating | ||||||
| 5 | Finished Board Thickness | 0.2-3.2mm | 3.4-7mm | |||||
| 6 | Minimum Core Thickness | 0.15mm(6mil) | 0.1mm(4mil) | |||||
| 7 | Copper Thickness | Min. 1/2 OZ, Max. 4 OZ | Min. 1/3 OZ, Max. 10 OZ | |||||
| 8 | PTH Wall | 20um(0.8mil) | 25um(1mil) | |||||
| 9 | Maximum Board Size | 500*600mm(19”*23”) | 1100*500mm(43”*19”) | |||||
| 10 | Hole | Min laser drilling size | 4mil | 4mil | ||||
| Max laser drilling size | 6mil | 6mil | ||||||
| Max aspect ratio for Hole plate | 10:1（hole diameter＞8mil） | 20:1 | ||||||
| Max aspect ratio for laser via filling plating | 0.9:1(Depth included copper thickness) | 1:1(Depth included copper thickness) | ||||||
| Max aspect ratio for mechanical depth- control drilling board(Blind hole drilling depth/blind hole size) |
0.8:1(drilling tool size≥10mil) | 1.3:1(drilling tool size≤8mil),1.15:1(drilling tool size≥10mil) | ||||||
| Min. depth of Mechanical depth-control(back drill) | 8mil | 8mil | ||||||
| Min gap between hole wall and conductor (None blind and buried via PCB) |
7mil(≤8L),9mil(10-14L),10mil(＞14L) | 5.5mil(≤8L),6.5mil(10-14L),7mil(＞14L) | ||||||
| Min gap between hole wall conductor (Blind and buried via PCB) | 8mil(1 times laminating),10mil(2 times laminating), 12mil(3 times laminating) | 7mil(1 time laminating), 8mil(2 times laminating), 9mil(3 times laminating) | ||||||
| Min gab between hole wall conductor(Laser blind hole buried via PCB) | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | 7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2） | ||||||
| Min space between laser holes and conductor | 6mil | 5mil | ||||||
| Min space between hole walls in different net | 10mil | 10mil | ||||||
| Min space between hole walls in the same net | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | 6mil(thru-hole& laser hole PCB),10mil(Mechanical blind&buried PCB) | ||||||
| Min space bwteen NPTH hole walls | 8mil | 8mil | ||||||
| Hole location tolerance | ±2mil | ±2mil | ||||||
| NPTH tolerance | ±2mil | ±2mil | ||||||
| Pressfit holes tolerance | ±2mil | ±2mil | ||||||
| Countersink depth tolerance | ±6mil | ±6mil | ||||||
| Countersink hole size tolerance | ±6mil | ±6mil | ||||||
| 11 | Pad(ring) | Min Pad size for laser drillings | 10mil(for 4mil laser via),11mil(for 5mil laser via) | 10mil(for 4mil laser via),11mil(for 5mil laser via) | ||||
| Min Pad size for mechanical drillings | 16mil(8mil drillings) | 16mil(8mil drillings) | ||||||
| Min BGA pad size | HASL:10mil, LF HASL:12mil, other surface technics are 10mil(7mil is ok for flash gold) | HASL:10mil, LF HASL:12mil, other surface technics are 7mi | ||||||
| Pad size tolerance(BGA) | ±1.5mil(pad size≤10mil);±15%(pad size>10mil) | ±1.2mil(pad size≤12mil);±10%(pad size≥12mil) | ||||||
| 12 | Width/Space | Internal Layer | 1/2OZ：3/3mil | 1/2OZ：3/3mil | ||||
| 1OZ: 3/4mil | 1OZ: 3/4mil | |||||||
| 2OZ: 4/5.5mil | 2OZ: 4/5mil | |||||||
| 3OZ: 5/8mil | 3OZ: 5/8mil | |||||||
| 4OZ: 6/11mil | 4OZ: 6/11mil | |||||||
| 5OZ: 7/14mil | 5OZ: 7/13.5mil | |||||||
| 6OZ: 8/16mil | 6OZ: 8/15mil | |||||||
| 7OZ: 9/19mil | 7OZ: 9/18mil | |||||||
| 8OZ: 10/22mil | 8OZ: 10/21mil | |||||||
| 9OZ: 11/25mil | 9OZ: 11/24mil | |||||||
| 10OZ: 12/28mil | 10OZ: 12/27mil | |||||||
| External Layer | 1/3OZ：3.5/4mil | 1/3OZ：3/3mil | ||||||
| 1/2OZ：3.9/4.5mil | 1/2OZ：3.5/3.5mil | |||||||
| 1OZ: 4.8/5mil | 1OZ: 4.5/5mil | |||||||
| 1.43OZ（positive）:4.5/7 | 1.43OZ（positive）:4.5/6 | |||||||
| 1.43OZ（negative ）:5/8 | 1.43OZ（negative ）:5/7 | |||||||
| 2OZ: 6/8mil | 2OZ: 6/7mil | |||||||
| 3OZ: 6/12mil | 3OZ: 6/10mil | |||||||
| 4OZ: 7.5/15mil | 4OZ: 7.5/13mil | |||||||
| 5OZ: 9/18mil | 5OZ: 9/16mil | |||||||
| 6OZ: 10/21mil | 6OZ: 10/19mil | |||||||
| 7OZ: 11/25mil | 7OZ: 11/22mil | |||||||
| 8OZ: 12/29mil | 8OZ: 12/26mil | |||||||
| 9OZ: 13/33mil | 9OZ: 13/30mil | |||||||
| 10OZ: 14/38mil | 10OZ: 14/35mil | |||||||
| 13 | Dimension Tolerance | Hole Position | 0.08 ( 3 mils) | |||||
| Conductor Width(W) | 20% Deviation of Master A/W |
1mil Deviation of Master A/W |
||||||
| Outline Dimension | 0.15 mm ( 6 mils) | 0.10 mm ( 4 mils) | ||||||
| Conductors & Outline ( C – O ) |
0.15 mm ( 6 mils) | 0.13 mm ( 5 mils) | ||||||
| Warp and Twist | 0.75% | 0.50% | ||||||
| 14 | Solder Mask | Max drilling tool size for via filled with Soldermask (single side) | 35.4mil | 35.4mil | ||||
| Soldermask color | Green, Black, Blue, Red, White, Yellow,Purple matte/glossy | |||||||
| Silkscreen color | White, Black,Blue,Yellow | |||||||
| Max hole size for via filled with Blue glue aluminium | 197mil | 197mil | ||||||
| Finish hole size for via filled with resin | 4-25.4mil | 4-25.4mil | ||||||
| Max aspect ratio for via filled with resin board | 8:1 | 12:1 | ||||||
| Min width of soldermask bridge | Base copper≤0.5 oz、Immersion Tin： 7.5mil(Black), 5.5mil(Other color) , 8mil( on copper area) | |||||||
| Base copper≤0.5 oz、Finish treatment not Immersion Tin ： 5.5 mil(Black,extremity 5mil), 4mil(Other color,extremity 3.5mil) , 8mil( on copper area |
||||||||
| Base coppe 1 oz: 4mil(Green), 5mil(Other color) , 5.5mil(Black,extremity 5mil),8mil( on copper area) | ||||||||
| Base copper 1.43 oz: 4mil(Green), 5.5mil(Other color) , 6mil(Black), 8mil( on copper area) | ||||||||
| Base copper 2 oz-4 oz: 6mil, 8mil( on copper area) | ||||||||
| 15 | Surface Treatment | Lead free | Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead free、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP,ENIG+Gold finger,Flash gold(electroplated gold)+Gold finger,Immersion silver+Gold finger,Immersion Tin+Gold finge | |||||
| Leaded | Leaded HASL | |||||||
| Aspect ratio | 10:1(HASL Lead free、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) | |||||||
| Max finished size | HASL Lead 22″*39″；HASL Lead free 22″*24″；Flash gold 24″*24″；Hard gold 24″*28″；ENIG 21″*27″；Flash gold(electroplated gold) 21″*48″；Immersion Tin 16″*21″；Immersion silver 16″*18″；OSP 24″*40″； | |||||||
| Min finished size | HASL Lead 5″*6″；HASL Lead free 10″*10″；Flash gold 12″*16″；Hard gold 3″*3″；Flash gold(electroplated gold) 8″*10″；Immersion Tin 2″*4″；Immersion silver 2″*4″；OSP 2″*2″； | |||||||
| PCB thickness | HASL Lead 0.6-4.0mm；HASL Lead free 0.6-4.0mm；Flash gold 1.0-3.2mm；Hard gold 0.1-5.0mm；ENIG 0.2-7.0mm；Flash gold(electroplated gold) 0.15-5.0mm；Immersion Tin 0.4-5.0mm；Immersion silver 0.4-5.0mm；OSP 0.2-6.0mm | |||||||
| Max high to gold finger | 1.5inch | |||||||
| Min space between gold fingers | 6mil | |||||||
| Min block space to gold fingers | 7.5mil | |||||||
| 16 | V-Cutting | Panel Size | 500mm X 622 mm ( max. ) | 500mm X 800 mm ( max. ) | ||||
| Board Thickness | 0.50 mm (20mil) min. | 0.30 mm (12mil) min. | ||||||
| Remain Thickness | 1/3 board thickness | 0.40 +/-0.10mm( 16+/-4 mil ) | ||||||
| Tolerance | ±0.13 mm(5mil) | ±0.1 mm(4mil) | ||||||
| Groove Width | 0.50 mm (20mil) max. | 0.38 mm (15mil) max. | ||||||
| Groove to Groove | 20 mm (787mil) min. | 10 mm (394mil) min. | ||||||
| Groove to Trace | 0.45 mm(18mil) min. | 0.38 mm(15mil) min. | ||||||
| 17 | Slot | Slot size tol.L≥2W | PTH Slot: L：+/-0.13(5mil) W：+/-0.08(3mil) | PTH Slot: L：+/-0.10(4mil) W：+/-0.05(2mil) | ||||
| NPTH slot(mm) L+/-0.10 (4mil) W：+/-0.05(2mil) | NPTH slot(mm) L：+/-0.08 (3mil) W：+/-0.05(2mil) | |||||||
| 18 | Min Spacing from hole edge to hole edge | 0.30-1.60 (Hole Diameter) | 0.15mm(6mil) | 0.10mm(4mil) | ||||
| 1.61-6.50 (Hole Diameter) | 0.15mm(6mil) | 0.13mm(5mil) | ||||||
| 19 | Min spacing between hole edge to circuitry pattern | PTH hole: 0.20mm(8mil) | PTH hole: 0.13mm(5mil) | |||||
| NPTH hole: 0.18mm(7mil) | NPTH hole: 0.10mm(4mil) | |||||||
| 20 | Image transfer Registration tol | Circuit pattern vs.index hole | 0.10(4mil) | 0.08(3mil) | ||||
| Circuit pattern vs.2nd drill hole | 0.15(6mil) | 0.10(4mil) | ||||||
| 21 | Registration tolerance of front/back image | 0.075mm(3mil) | 0.05mm(2mil) | |||||
| 22 | Multilayers | Layer-layer misregistration | 4layers: | 0.15mm(6mil)max. | 4layers: | 0.10mm(4mil) max. | ||
| 6layers: | 0.20mm(8mil)max. | 6layers: | 0.13mm(5mil) max. | |||||
| 8layers: | 0.25mm(10mil)max. | 8layers: | 0.15mm(6mil) max. | |||||
| Min. Spacing from Hole Edge to Innerlayer Pattern | 0.225mm(9mil) | 0.15mm(6mil) | ||||||
| Min.Spacing from Outline to Innerlayer Pattern | 0.38mm(15mil) | 0.225mm(9mil) | ||||||
| Min. board thickness | 4layers:0.30mm(12mil) | 4layers:0.20mm(8mil) | ||||||
| 6layers:0.60mm(24mil) | 6layers:0.50mm(20mil) | |||||||
| 8layers:1.0mm(40mil) | 8layers:0.75mm(30mil) | |||||||
| Board thickness tolerance | 4layers:+/-0.13mm(5mil) | 4layers:+/-0.10mm(4mil) | ||||||
| 6layers:+/-0.15mm(6mil) | 6layers:+/-0.13mm(5mil) | |||||||
| 8-12 layers:+/-0.20mm (8mil) | 8-12 layers:+/-0.15mm (6mil) | |||||||
| 23 | Insulation Resistance | 10KΩ~20MΩ(typical:5MΩ) | ||||||
| 24 | Conductivity | <50Ω(typical:25Ω) | ||||||
| 25 | Test voltage | 250V | ||||||
| 26 | Impedance control | ±5ohm(＜50ohm), ±10%(≥50ohm) | ||||||
PCBTok offers flexible shipping methods for our customers, you may choose from one of the methods below.
1. DHL
DHL offers international express services in over 220 countries.
DHL partners with PCBTok and offers very competitive rates to customers of PCBTok.
It normally takes 3-7 business days for the package to be delivered around the world.
2. UPS
UPS gets the facts and figures about the world’s largest package delivery company and one of the leading global providers of specialized transportation and logistics services.
It normally takes 3-7 business days to deliver a package to most of the addresses in the world.
3. TNT
TNT has 56,000 employees in 61 countries.
It takes 4-9 business days to deliver the packages to the hands
of our customers.
4. FedEx
FedEx offers delivery solutions for customers around the world.
It takes 4-7 business days to deliver the packages to the hands
of our customers.
5. Air, Sea/Air, and Sea
If your order is of large volume with PCBTok, you can also choose
to ship via air, sea/air combined, and sea when necessary.
Please contact your sales representative for shipping solutions.
Note: if you need others, please contact your sales representative for shipping solutions.
You can use the following payment methods:
Telegraphic Transfer(TT): A telegraphic transfer (TT) is an electronic method of transferring funds utilized primarily for overseas wire transactions. It’s very convenient to transfer.
Bank/Wire transfer: To pay by wire transfer using your bank account, you need to visit your nearest bank branch with the wire transfer information. Your payment will be completed 3-5 business days after you have finished the money transfer.
Paypal: Pay easily, fast and secure with PayPal. many other credit and debit cards via PayPal.
Credit Card: You can pay with a credit card: Visa, Visa Electron, MasterCard, Maestro.
